|
|
#421 |
|
マスタング = 遅い
Drives: 2017 Chevrolet Camaro SS 1LE Join Date: Aug 2015
Location: Florida
Posts: 7,061
|
You don't want the 7 speed manual. The gates are very narrow, and the C7 guys aren't the biggest fans of it...the 6 speed manual is the better choice.
|
|
|
|
|
|
#422 |
![]() Drives: Jeep Wrangler Join Date: May 2015
Location: NC
Posts: 96
|
|
|
|
|
|
|
#423 |
![]() Drives: 98 SS Join Date: May 2015
Location: snohomish Wa
Posts: 4
|
What is the rear axle ratio? And the gear ratios in this new 6 speed? I hope this is the 6 speed that is going in the 1LE
|
|
|
|
|
|
#424 | |
|
I used to be Dragoneye...
|
Quote:
They did not release any details about this new M6, besides the fact that it only has 1 overdrive gear. This is interesting, because the other M6 has two, and Corvette's M7 has 3!! |
|
|
|
|
|
|
#425 |
|
#becauseracecar
Drives: 2016 SS Sedan, 2016 Camaro SS Join Date: May 2015
Location: Phoenix
Posts: 2,959
|
I've always thought that too but I'm thinking in the ZL1 it would be a good tranny to have because of the 5th gear 1:1 ratio that the ZL1 has instead of 4th like most trannys including the TR6070 7 speed in the Vette. It would be nice if the ZL1 had the 5th gear 1:1 and then 2 OD gears like the TR6060 has. I'm afraid that the ratios in the ZL1 TR6060 will be either too wide between 5th and 6th or be too narrow and offer poor highway gas mileage and higher rpm's. I understand the 7 speed physically can't fit in the tunnel, but it would be pretty cool to have a TR6070 with 2OD gears instead of 3.
|
|
|
|
|
|
#426 | |
![]() ![]() ![]() ![]() Drives: 2016 Camaro 1LT M6 Join Date: Aug 2008
Location: Evansville, IN
Posts: 1,256
|
Quote:
|
|
|
|
|
|
|
#427 |
![]() |
would be nice to see the 3.91 gears return as well...but my guess it will be 3.73 like the ss and 1LE...
|
|
|
|
|
|
#428 | |
|
I used to be Dragoneye...
|
Quote:
On the track....very rarely did I push it into 5th. |
|
|
|
|
|
|
#429 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 11 F150 EB/13 Sonic RS/15 Z06 Join Date: Sep 2010
Location: Little Rock, AR
Posts: 7,127
|
That's what I'm hoping for too. That would be amazing with the A10.
__________________
New Ride -- 2015 Z06 2LZ (stock) -- Journal
Old Ride -- 2012 Camaro 2LT/RS (647 RWHP & 726 RWTQ) -- Build Thread |
|
|
|
|
|
#430 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: Current Camaro-less Join Date: Jul 2014
Location: Oregon
Posts: 3,241
|
Quote:
With A8 transmissions you don't need more than 3.07 gears to pull like a lunatic, depending on the gearing ratios in the A10 you might not need more than 2.66's! |
|
|
|
|
|
|
#431 |
|
I used to be Dragoneye...
|
They would be interesting (and potentially obnoxious)....first gear in the A8 is 4.56:1....using 2.77s in the back, top speed is 44mph. Assuming they keep the same first gear (I think it's even shorter in the A10), 3.91s would drop that top speed to 31mph.
|
|
|
|
|
|
#432 | |
![]() Drives: 2016 C7 conv 7 speed. Black/black Join Date: Jul 2014
Location: Atlanta. GA.
Posts: 185
|
Quote:
__________________
|
|
|
|
|
|
|
#433 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: Current Camaro-less Join Date: Jul 2014
Location: Oregon
Posts: 3,241
|
|
|
|
|
|
|
#434 |
|
マスタング = 遅い
Drives: 2017 Chevrolet Camaro SS 1LE Join Date: Aug 2015
Location: Florida
Posts: 7,061
|
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|