08-28-2012, 08:31 PM | #1 |
Drives: 2012 zl1 Join Date: Mar 2012
Location: terrell nc
Posts: 102
|
mod airaid
installed modified airaid cold air intake on #435
|
08-28-2012, 08:33 PM | #2 |
Drives: 2012 ZL1 #450 Join Date: Nov 2011
Location: Big Spring, TX
Posts: 479
|
Cool, did you put a tune on it or has the SES light come on?
|
08-28-2012, 08:36 PM | #3 |
Drives: 2012 zl1 Join Date: Mar 2012
Location: terrell nc
Posts: 102
|
no tune and lites not on yet
|
08-28-2012, 08:53 PM | #4 |
Drives: 2013 red Lingenfelter ZL1 Join Date: Apr 2012
Location: zionsville IN
Posts: 567
|
That's a good lookin piece! Let us know if you notice any performance gain or better throttle responce?
|
08-28-2012, 09:54 PM | #5 |
how much and where you get it from???
|
|
08-28-2012, 10:49 PM | #6 |
Drives: 2023 Black ZL1 Auto Join Date: Oct 2009
Location: FEMA Region 4
Posts: 2,936
|
What's been modified over the stock setup?
|
08-29-2012, 04:22 PM | #7 |
Drives: 2012 zl1 Join Date: Mar 2012
Location: terrell nc
Posts: 102
|
airaid
bought it from summit, made for ls3 with magnuson supercharger, cost 499.00 with 50. rebate from airaid. i liked the carbon fiber pipe,but it is too long for the eaton supercharger connection. so i got my angle grinder out and marked the pipe for correct angles then cut it. had to drill new holes for maf sensor block and pvc nipple pipe. spent 4-5 hours making this work, this does change the intake sound and more throttle response at lower rpm.
|
08-29-2012, 07:46 PM | #8 |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,816
|
[QUOTE=CAM....ZL1;5509830]how does it run? those hp #s seem high. I might say 620hp max.
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
08-29-2012, 08:02 PM | #9 |
Drives: 2012 ZL1 #450 Join Date: Nov 2011
Location: Big Spring, TX
Posts: 479
|
I dont think they are low, I think a good tune on this car is worth a very good bump in HP, I think that is why these were on a QC hold and why they haven't been performing to the numbers released, because they were all detuned.
|
08-29-2012, 08:54 PM | #10 |
Drives: 2013 Ashen Gray Metallic-M6 Join Date: Aug 2012
Location: Artesia, NM
Posts: 171
|
Just installed my air raid cai, took less than an hour. Just gotta get it strapped down to tune now.
|
08-29-2012, 08:55 PM | #11 |
Drives: 2013 Ashen Gray Metallic-M6 Join Date: Aug 2012
Location: Artesia, NM
Posts: 171
|
BTW, got mine from JDP who currently has a great price on the kit.
|
08-29-2012, 08:59 PM | #12 | |||
Drives: 2011 Camaro SS/ 2016 Camaro SS Join Date: Jun 2009
Location: Sandy, Utah
Posts: 3,256
|
Quote:
Quote:
Quote:
Kind regards, Jordan Priestley 888.308.6007 |
|||
09-15-2012, 05:59 PM | #13 |
Drives: 2012 zl1 Join Date: Mar 2012
Location: terrell nc
Posts: 102
|
throw out that zl1 stock air cleaner
put airaid cold air intake back on today, had it off to take car in for first oil change,,finished up the last min detail of the maf sensor, came in straight up from bottom of 4 1/4" carbon fiber tube right in the mouth of the extra large airaid filter and what a difference---- idle to 6250 rpm in a few seconds, amazing improvment with a supercharger sound now. now i got another problem tires were still smoking when i pulled in the driveway.the wifey could tell it went well by the permagrin on my face..aaaahh life with a zl1............
|
02-01-2016, 07:42 PM | #14 |
Drives: 2012 zl1 Join Date: Mar 2012
Location: terrell nc
Posts: 102
|
kelwilliams08 remember this
|
|
|
|
|