|
|
#1 |
![]() Drives: White 1lt sunroof NPP Join Date: Dec 2015
Location: Los Angeles
Posts: 10
|
Emblem Delete
Does anybody know how to remove the front Chevy Emblem from a 2016 lt?
|
|
|
|
|
|
#2 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2016 Hyper Blue 1SS Join Date: Jul 2015
Location: hampton roads
Posts: 2,763
|
What emblem? The rear just buy the 3m emblem removal spray from autozone and emblem will fall off after a few minutes. The front is attached.
__________________
1ss/Auto-Hyper Blue
acs carbon flash spoiler, bmr springs, gm clear tails. Texas speed cam, 223/227 .635/.635 116 LSA, Kooks Long Tube Headers with green cats, MSD Atomic Air Force Intake, CAI Cold Air Intake, QTP cutouts. 503 hp Best so far 11.5 at 123 with a 1.83 60ft. BMR lower and upper trailing arms and upper control arms,E85 DELIVERED 12/29/15 http://youtube.com/bybcous " no talking only racing on my youtube" |
|
|
|
|
|
#3 |
![]() Drives: White 1lt sunroof NPP Join Date: Dec 2015
Location: Los Angeles
Posts: 10
|
The one thats on the grille, can I simply take it off or would I have to replace the grille?
|
|
|
|
|
|
#4 |
|
The Dogfather
Drives: #1 off the line for a customer. '16 Join Date: Oct 2015
Location: Andover, KS
Posts: 2,621
|
If you never plan on putting the front one off you can just break the latch on the bowtie and it'll come off. Keep in mind, not only does it "click" into place but it is also has an adhesive patch on it. So... You can either grab the 3m emblem removal spray from autozone or use a heat gun/hair dryer to loosen up the glue then use dental floss or fishing line to remove the glue then break the tab behind the bowtie.
DO NOT PRY WITH A SCREW DRIVER like my dealership did. |
|
|
|
|
|
#5 |
![]() Drives: 2020 Elkhart Lake Blue 1LT Z51 C8 Join Date: May 2009
Location: Minooka, IL
Posts: 621
|
Screwdriver?? How can someone be that stupid.
__________________
Ordered-Hyper Blue 1SS, A8, NPP, 56W wheels Built 1/20/16
Delivered 2/12/16!! Sold 9/17/19 :( 2020 C8 ordered!! "The greatest sound in the world is a Rolls Royce Merlin over 100 inches" www.timadamsphotography.com |
|
|
|
|
|
#6 |
|
Retired from Car mfrs....
Drives: 2LT RS/HR-V Join Date: May 2013
Location: /Fort Lauderdale
Posts: 10,044
|
I did this today, a small trim tool used to pry on one end popped it loose with no effort. Replaced with black badge. No adhesive on either badge. Snaps in place.
|
|
|
|
|
|
#7 |
![]() Drives: 2016 Mosaic Black 2SS Join Date: Dec 2013
Location: Plant City
Posts: 408
|
Smoked mine with Plasi Dip "smoke" dark out but will put pics on tomorrow, Did Black on bowtie......works just fine....
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|