You are browsing camaro6 
12-22-2015, 10:17 PM
|
#1 |
  
Drives: 2016/SS Has had 4 Gen 5's Join Date: Dec 2015
Location: Hudson,WI
Posts: 939
|
Question tire size?
Anybody know what tire size is the Biggest you can go front and Rear. I was running 20" 315's in the rear> Please PM with anything you Know
 What's the biggest tire size you can get front and rear? and stay with the Stock Black rims ?????
|
|
|
|
12-22-2015, 10:57 PM
|
#2 | |
|
Drives: 2016 Camaro SS - A8, MRC, NPP Join Date: Apr 2009
Location: DE
Posts: 549
|
Quote:
|
|
|
|
|
|
12-22-2015, 11:44 PM
|
#3 |
 Drives: toyota mr2 Join Date: Dec 2008
Location: Jackson, Ca
Posts: 99
|
A 255/40 front and 285/35 "should fit". Can't see why it wouldn't. Not sure if stock offsets will allow for the extra 5mm on each side. Once again, can't imagine not fitting. Going any bigger than that and it's time for new rims. I would suggest a stickier tire for extra traction before trying to go wider than that without new wheels. We are all in the learning phase on what works. Good luck.
|
|
|
|
|
12-23-2015, 04:47 AM
|
#4 |
 
Drives: '16 Camaro 2LT RS Join Date: Aug 2015
Location: Los Angeles, CA
Posts: 144
|
Currently have on (no issues)
315/35 R20 20x11 in the Rear 275/40/R20 20x10 in the front Tried on Pirelli P Zero 305/35 R20 20x11 had an issue with the driver side rear tire causing contact with the carpet. Looks like there is a small carpet bulge for a cable.
__________________
|
|
|
|
|
12-23-2015, 09:01 AM
|
#5 | |
|
Quote:
__________________
Kooks ceramic coated headers -1 7/8 in. x 3 in
Pray ported 95MM TB Pray ported MSD IM Rotofab CAI BTR 225 CAM PRC 312 CC Ported Heads Katech Oil Pump DSX Flex Fuel E-85 kit QTP exhaust cutouts Full JLAudio Stereo Build w/ 13-W6  |
|
|
|
|
|
12-25-2015, 01:13 PM
|
#6 |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,882
|
If your going to lower it you should stay in the 285 area on a 9.5 or a 10 so you can tuck it. I'll be doing the bmr 1.2 on mine like I have on my 15ss, but probably will do a 40 series in the rear, don't really like the short side wall and 35 series up front.. Really won't know till I get my 16 hear and I'll order in a couple of sets of wheels and tires at work to figure out the best set up. I'll lower it first and then wheels and tires. I'll tuck the biggest I can without any rubbing. Since I sell custom wheels and tires for a living it makes it a little easier for me to get it done.
Last edited by laynlo15; 12-25-2015 at 01:26 PM. |
|
|
|
|
12-28-2015, 03:10 AM
|
#7 | |
|
Drives: '16 Camaro 2LT RS Join Date: Aug 2015
Location: Los Angeles, CA
Posts: 144
|
Quote:
__________________
|
|
|
|
|
|
12-28-2015, 10:10 AM
|
#8 | |
 Drives: 2021 Camaro 2LT Join Date: Oct 2013
Location: Mesquite, Nv.
Posts: 490
|
Quote:
wider wheels. Even going 10mm wider on the tires distorts the tire sidewall in the wrong direction! The stock tire size is optimum for the wheel widths. If for inline traction maybe a 10mm wider tire in the rear might help. |
|
|
|
|
|
11-30-2016, 12:02 AM
|
#9 |
 Drives: P1SC @8psi Stage 2 intercooler 8SP Join Date: Nov 2016
Location: Omaha NE
Posts: 6
|
I'm having the same issue here. I have 20x10s in the rear and it looks like I can't find a size they make for drag radials that fit these wheel wells. Why the hell are the gen 6 wheel wells so small. Chevy should have expected a car like this to be used at the drag strip... Another issue I have is why is the gearing so low? What can I do to make a 305/35 fit or hell even a 275/40
|
|
|
|
|
08-22-2017, 11:09 AM
|
#10 |
|
Instagram- _2sslow_
Drives: 2016 Camaro 2SS Join Date: Dec 2015
Location: Queens, NY
Posts: 198
|
I'm looking at the Mickey street ss 295/65r15 for my 16 Camaro SS would those fit ????
__________________
Instagram- _2sslow_
2011 Camaro LT RS (Sold) 2011 Range Rover Sport HSE (Sold) 2016 Camaro 2SS NPP, TSP headers & Xpipe, Skid e85, CAI Intake, MSD IM, 95m TB, BigPowerRacing Tune, H&R Lowering springs, BMR sway bars |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
