retrofit with flashtech halos - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

puertoricanfont · 06-26-2012, 02:23 AM

Quote:

Originally Posted by Robert345

Nice! I wish I could muster up the courage to crack open my headlights. Nice job!

Its really not a difficult job. The oven is the key for this project. Thanks for the conpliments tho !

James@Flashtech · 06-26-2012, 11:18 AM

sir you did a maaaavelous job haha

LOOT310 · 07-15-2012, 03:20 AM

Hey I just ordered some halos from flashtech and the leds are yellow on white. Why are the ones in this thread white on white? Did I miss an option somewhere?

puertoricanfont · 07-15-2012, 08:21 AM

Are you talking about the actual color of the individual led. Because mine are yellow but once installed you can't notice at all. If that's what u worried about

LOOT310 · 07-15-2012, 12:19 PM

Quote:

Originally Posted by puertoricanfont

Are you talking about the actual color of the individual led. Because mine are yellow but once installed you can't notice at all. If that's what u worried about

Cool, good to know. I just did a Morimoto retrofit with the same halos but havent installed them yet. They look more yellow than I thought they would, but yours look fine.

I have seen these LED halos with the black board and white LEDs and I believe the Oracle ones are all white.

puertoricanfont · 07-15-2012, 04:29 PM

Looks badass! And At first I was also worried about the yellow led but you literally can't seen them unless ur super close t o the car . Like super close lol

James@Flashtech · 07-16-2012, 11:01 AM

LOOT310. You can paint the halo rings if you would like.

LOOT310 · 07-16-2012, 11:43 PM

Quote:

Originally Posted by James@Flashtech

LOOT310. You can paint the halo rings if you would like.

Really? How's that done without painting the lights. I just had mine installed today and PRF is right, the yellow leds are not very noticeable.

puertoricanfont · 07-17-2012, 01:18 AM

Told ya

Jonny101 · 03-25-2015, 09:09 PM

How did you do the wiring? I'm confused on where to wire it.

puertoricanfont · 03-26-2015, 02:24 AM

Quote:

Originally Posted by Jonny101

How did you do the wiring? I'm confused on where to wire it.

I wired them to the parking light wire.it's the wire that is coming out of the side marker. Just figure out which one is positive and negative and match to halo wiring.

Jonny101 · 03-26-2015, 04:05 PM

What did you use to wire them? Did you solder it?

puertoricanfont · 03-26-2015, 04:32 PM

Quote:

Originally Posted by Jonny101

What did you use to wire them? Did you solder it?

i spliced wires (+ and -) from the side marker wire, then attached a female waterproof connector on the end of the wire. i then put male connectors on the end of the halo wires. that way i can quickly disconnect them if needed.

Jonny101 · 03-26-2015, 10:09 PM

There is so many connectors, which ones did you use or recommend? I found this one but I don't know if it's good or not.

06-26-2012, 11:18 AM	#44
James@Flashtech Drives: Delorean Join Date: Apr 2012 Location: New Orleans Posts: 80	sir you did a maaaavelous job haha

07-15-2012, 03:20 AM	#45
LOOT310 Drives: 2011 2SS Join Date: Mar 2012 Location: Los Angeles Posts: 93	Hey I just ordered some halos from flashtech and the leds are yellow on white. Why are the ones in this thread white on white? Did I miss an option somewhere?

07-15-2012, 08:21 AM	#46
puertoricanfont Drives: 2016 Camaro 2ss Join Date: Aug 2010 Location: Tampa, FL Posts: 1,623	Are you talking about the actual color of the individual led. Because mine are yellow but once installed you can't notice at all. If that's what u worried about

07-15-2012, 04:29 PM	#48
puertoricanfont Drives: 2016 Camaro 2ss Join Date: Aug 2010 Location: Tampa, FL Posts: 1,623	Looks badass! And At first I was also worried about the yellow led but you literally can't seen them unless ur super close t o the car . Like super close lol

07-16-2012, 11:01 AM	#49
James@Flashtech Drives: Delorean Join Date: Apr 2012 Location: New Orleans Posts: 80	LOOT310. You can paint the halo rings if you would like.

07-17-2012, 01:18 AM	#51
puertoricanfont Drives: 2016 Camaro 2ss Join Date: Aug 2010 Location: Tampa, FL Posts: 1,623	Told ya

03-25-2015, 09:09 PM	#52
Jonny101 Drives: 2012 Chevy Camaro 45th Edition RS Join Date: Jul 2014 Location: California Posts: 6	How did you do the wiring? I'm confused on where to wire it.

03-26-2015, 04:05 PM	#54
Jonny101 Drives: 2012 Chevy Camaro 45th Edition RS Join Date: Jul 2014 Location: California Posts: 6	What did you use to wire them? Did you solder it?

03-26-2015, 10:09 PM	#56
Jonny101 Drives: 2012 Chevy Camaro 45th Edition RS Join Date: Jul 2014 Location: California Posts: 6	There is so many connectors, which ones did you use or recommend? I found this one but I don't know if it's good or not.