Camaro Wide Body by Spade Kreations - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CamaroI · 08-05-2014, 09:01 AM

It does look clean. However, not sure for the price and amount of work involved if wouldn't want something more noticable than suttle.

Dexman1349 · 08-05-2014, 09:09 AM

Is this only for the rear or is the front widened too?

Spade Kreations · 08-05-2014, 09:17 AM

Quote:

Originally Posted by CamaroI

It does look clean. However, not sure for the price and amount of work involved if wouldn't want something more noticable than suttle.

It is almost 2 inches on each side so it is pretty noticeable in person. We just didn't want to get too cartoon-ish and lose the lines of the car. We can build anything you want though.

Quote:

Originally Posted by Dexman1349

Is this only for the rear or is the front widened too?

This is just the doors and rear fenders but we can do the front as well. If you can dream it we can make it a reality. And if you can't dream it up, we can.

CamaroI · 08-05-2014, 09:20 AM

It does look very clean...Wish I had the extra funds to do and you were closer as well. There are a couple of shops around the area that do this including one of our club members. However, I could buy a new car for what he is charging. Couple of the other shops quoting around 8000-9000

Spade Kreations · 08-11-2014, 11:36 AM

Quote:

Originally Posted by CamaroI

It does look very clean...Wish I had the extra funds to do and you were closer as well. There are a couple of shops around the area that do this including one of our club members. However, I could buy a new car for what he is charging. Couple of the other shops quoting around 8000-9000

The total cost can vary a lot depending on exactly what you are having done. Just a straight kit install with no custom work and blending the paint to a stock color would start at about $7500.

TeelsBlack · 08-12-2014, 02:38 PM

If i had the extra cash, I'd be all over this. Hard finding wide bodies that look great and not over the top. Payment plans available? haha

Spade Kreations · 08-12-2014, 08:20 PM

Quote:

Originally Posted by TeelsBlack

If i had the extra cash, I'd be all over this. Hard finding wide bodies that look great and not over the top. Payment plans available? haha

Thanks. We do indeed have financing available.

TeelsBlack · 08-13-2014, 07:48 AM

Quote:

Originally Posted by Spade Kreations

Thanks. We do indeed have financing available.

Might have to make an 8 hour trip to ohio...

Spade Kreations · 11-19-2014, 09:01 AM

Quote:

Originally Posted by TeelsBlack

Might have to make an 8 hour trip to ohio...

Sounds good. Just let us know man.

jgray1978 · 11-19-2014, 09:09 AM

I'd be happy if I could just find some wheel flares for these cars...

Spade Kreations · 11-19-2014, 03:51 PM

Quote:

Originally Posted by jgray1978

I'd be happy if I could just find some wheel flares for these cars...

We could always do some custom flares for you.

Lombardi · 11-19-2014, 04:13 PM

Quote:

Originally Posted by Spade Kreations

We could always do some custom flares for you.

could you guys do something similar to the Z28 flares?

- "Lifes to short to drive a boring car"

Spade Kreations · 12-03-2014, 09:37 AM

Quote:

Originally Posted by Lombardi

could you guys do something similar to the Z28 flares?

- "Lifes to short to drive a boring car"

Yeah, shouldn't be a problem. We are talking about custom work though so it is not something that is going to be a couple hundred dollars.

Dave@Sturgiscamarorally · 12-04-2014, 10:16 PM

Didn't make SEMA this year, maybe next. Car/kit looks sick. Way better then most wide body kits outs there.

08-05-2014, 09:09 AM	#16
Dexman1349 2010 2SS/RS M6 Drives: 2010 2SS/RS M6 Join Date: Jun 2010 Location: Auckland, NZ Posts: 1,482	Is this only for the rear or is the front widened too? __________________ 2/7/2014: 419 hp, 419 tq Cosmetic: ZL1 front w/mailslot, painted stripes, powdercoated SS rims, tow hook, and full chrome delete Suspension: Pfadt subframe bushings, Pfadt rear UCA bushings, Z28 Upper control arms, Spohn trailing arms with BMR trailing arm & differential bushings, ZL1 Toe Rods and springs, Prothane radius arm inserts & steering rack bushing, Pfadt Sport front sway, FE4 conversion w/ DS rear sway, Pfadt strut brace Drivetrain: RMCR tune, CAI intake, Kooks headers, hi-flo cats & exhaust, VMAX TB, ZL1 fuel pump, LSR Tri-Ax shifter Bumblebee Racecar Build

08-12-2014, 02:38 PM	#20
TeelsBlack Drives: 2013 Black-on-Black 2SS/RS Join Date: Jan 2014 Location: Williamsport, PA Posts: 128	If i had the extra cash, I'd be all over this. Hard finding wide bodies that look great and not over the top. Payment plans available? haha __________________ Performance Mods: CAI intake, BBK 95mm TB, 1-7/8 SP LT Headers, Comp Cam. 466rwhp

11-19-2014, 09:09 AM	#24
jgray1978 Drives: '12 2SS/RS 45th vert, '14 2SS/RS Join Date: Nov 2013 Location: Claremore, Oklahoma Posts: 840 View My Garage	I'd be happy if I could just find some wheel flares for these cars... __________________ 2012 2SS/RS LS3/M6 - C.A.I., Nightshade Tail Lights, ZL1 Fascia and Rockers, NightOwl Halo and Grille LED System, Bravado Americana Wheels With NT05 Rubber.

08-05-2014, 09:01 AM	#15
CamaroI Drives: 2010 IOM Camaro Join Date: Aug 2012 Location: DFW Posts: 3,112	It does look clean. However, not sure for the price and amount of work involved if wouldn't want something more noticable than suttle.

08-05-2014, 09:20 AM	#18
CamaroI Drives: 2010 IOM Camaro Join Date: Aug 2012 Location: DFW Posts: 3,112	It does look very clean...Wish I had the extra funds to do and you were closer as well. There are a couple of shops around the area that do this including one of our club members. However, I could buy a new car for what he is charging. Couple of the other shops quoting around 8000-9000

12-04-2014, 10:16 PM	#28
Dave@Sturgiscamarorally Drives: 2010 ABM 1SS Join Date: Nov 2014 Location: South Dakota Posts: 199	Didn't make SEMA this year, maybe next. Car/kit looks sick. Way better then most wide body kits outs there.