Need Opinions on rear wheel look - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

NinoSS · 01-20-2013, 09:23 PM

By the numbers mine are about 15mm further than OEM not 20mm...

Camero5 · 01-20-2013, 10:31 PM

Quote:

Originally Posted by Liam

I have to say I don't like it either. I am soon buying Giovanna Dalar 5 Black wheels, and I am trying to avoid that exact type of thing.

The offsets I'm showing as correct for mine are +20 front, +35 Rear. So I can't imagine using +20 on the rear would ever be correct.

I can't tell from the pics cause the wheels are turned, but are the fronts flush at +20?
Loving the overall look of your car, I almost bought that color. What blackout kit did you use on tail lights?

The +20 was perfect on the fronts. Very flush. Ill check the pictures in the morning. When I look at them on here, it is rotated properly. Ill see if I can upload front pictures to show you the wheels and tires.

The blackout kit was from Headlight Armor. It was $50 for the kit which includes side markers and rear tail lights. They did the install for me since I'm local. Great stuff and the lights are still very bright during the day and night.

Camero5 · 01-20-2013, 10:37 PM

Quote:

Originally Posted by Abomb1223

Toooo faaaar . . Red neckish

Wheel choice is good though : )

LOL...

The Kilis look great on the car.

Camero5 · 01-20-2013, 10:39 PM

Quote:

Originally Posted by rdblan2

Not a fan. If you keep them and decide to drive the car much, find a good paint guy.

I plan to change them tomorrow if all goes well.

I hit a nice dip in the road and the tire hit the outer fender. Not a great noise to hear. No damage to the plastic other than a scrap which is not visible from the outside. Still sucks.

Camero5 · 01-21-2013, 04:47 PM

I spoke to the dealer who sold me the tire and they pretty much told me that +20 Offset is the correct offset for this car on the rear and told me that the issue is that I put a 315 tire on a 10" RIM.

I am going to test them and test fit 295 or 305 on the rear and see if it sits flush.

I spoke with Giovanna and they did confirm that +20 is correct on the rears and this is due to the brembo brakes. This is only specific to the Kilis they said. A +38 would work only on the non Brembo camaros.

What do you think? Looking at the pictures I can see that the tire does bulge out a bit over the wheels. I just cannot tell if the wheels are out or not. Ill check when i get home.

CyberBri · 01-22-2013, 12:15 PM

that looks like straight @ss

2012InfernoSS · 01-22-2013, 08:10 PM

Id roundhouse who ever told you those were going to set flush

Rod Knock · 01-22-2013, 08:22 PM

Quote:

Originally Posted by Camero5

I spoke to the dealer who sold me the tire and they pretty much told me that +20 Offset is the correct offset for this car on the rear and told me that the issue is that I put a 315 tire on a 10" RIM.

I am going to test them and test fit 295 or 305 on the rear and see if it sits flush.

I spoke with Giovanna and they did confirm that +20 is correct on the rears and this is due to the brembo brakes. This is only specific to the Kilis they said. A +38 would work only on the non Brembo camaros.

What do you think? Looking at the pictures I can see that the tire does bulge out a bit over the wheels. I just cannot tell if the wheels are out or not. Ill check when i get home.

20" x 10" wheels 315 /35 /20 tires +35 on an 2011 SS w/Brembo brakes lowered 1.6: on Pedders coilovers

Camero5 · 01-22-2013, 09:43 PM

Quote:

Originally Posted by Rod Knock

20" x 10" wheels 315 /35 /20 tires +35 on an 2011 SS w/Brembo brakes lowered 1.6: on Pedders coilovers

Different wheels though right? Every wheel has a diff offset.

I found a guy who has the same setup and it is flush with 285 he has on the same offset. I spoke directly to Giovanna and the wheels were built to only work with OEM tire size.

I'm stuck with the 315 unless I can find someone to buy them so I can purchase a 285 instead.

SUX2BU · 01-22-2013, 10:51 PM

Looks like doo doo. 10" wide rears need at least a 35mm offset.

Zyklon-SS · 01-23-2013, 07:15 AM

Wow...it's sticking out at least 1.5", go give your dealer crap man

Camero5 · 01-23-2013, 11:51 AM

Quote:

Originally Posted by Zyklon-SS

Wow...it's sticking out at least 1.5", go give your dealer crap man

Yes 1.5".... The dealer stated that the wheels were built to have the OEM tires on them and not anything wider.. I think that is complete BS. I didnt buy 20x10 rims to stick with OEM tires.

They have a +35 offset wheel but they swear up and down that I will have issues with this particular style wheel.

lscamaro · 01-23-2013, 12:16 PM

Look up threads by others with kilis. I'm sure a few have gone with bigger tires. Ask them what offset they went with. I'm willing to bet the +35 will fit perfectly.

mikeSS · 01-23-2013, 01:20 PM

i mean my rubber sticks out, looks the the ZL1 tire. but those are stick out way to much.

01-20-2013, 09:23 PM	#29
NinoSS Drives: 2SS/RS CGM LS3 Join Date: Aug 2009 Location: NJ Posts: 1,619	By the numbers mine are about 15mm further than OEM not 20mm... __________________ Current - 2018 NGM 1LE (LT4 conversion coming soon) SOLD 2010 LS3 / Vengeance stage I cam / CAI intake w/ADM race scoop / Dynatech LT's / Eaton Posi LPE-JRE 3.91's / L99 Corsa / ZL1 wheels / NT05 275/315

01-22-2013, 12:15 PM	#34
CyberBri BRUCE WAYNES DD Drives: 2010 2SS/RS CGM Join Date: Dec 2011 Location: wilmington NC Posts: 511	that looks like straight @ss __________________ JBA 1 7/8 LT`s, High flow mids, and Cat back,Airaid intake, JRE Tune, & alot of flat black....

01-22-2013, 10:51 PM	#38
SUX2BU Quit being a pu$$y Drives: FAST Join Date: Jan 2011 Location: Sachse TX (DFW) Posts: 5,825 View My Garage	Looks like doo doo. 10" wide rears need at least a 35mm offset. __________________ <----- Click HERE to see ALL of my mods/write ups

01-23-2013, 12:16 PM	#41
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	Look up threads by others with kilis. I'm sure a few have gone with bigger tires. Ask them what offset they went with. I'm willing to bet the +35 will fit perfectly. __________________ Click Picture for Build Thread

01-21-2013, 04:47 PM	#33
Camero5 Hide! My wife's coming! Drives: 2013 Chevrolet Camaro ZL1 Join Date: Jun 2011 Location: Las Colinas, TX Posts: 1,442 View My Garage	I spoke to the dealer who sold me the tire and they pretty much told me that +20 Offset is the correct offset for this car on the rear and told me that the issue is that I put a 315 tire on a 10" RIM. I am going to test them and test fit 295 or 305 on the rear and see if it sits flush. I spoke with Giovanna and they did confirm that +20 is correct on the rears and this is due to the brembo brakes. This is only specific to the Kilis they said. A +38 would work only on the non Brembo camaros. What do you think? Looking at the pictures I can see that the tire does bulge out a bit over the wheels. I just cannot tell if the wheels are out or not. Ill check when i get home.

01-22-2013, 08:10 PM	#35
2012InfernoSS Drives: 93GMC sierra stepside/ ctsv3 Join Date: Dec 2011 Location: San Antonio, Texas Posts: 914	Id roundhouse who ever told you those were going to set flush

01-23-2013, 07:15 AM	#39
Zyklon-SS Drives: 2010 2SS LS3 Join Date: Dec 2011 Location: Port Credit -ON Posts: 600	Wow...it's sticking out at least 1.5", go give your dealer crap man

01-23-2013, 01:20 PM	#42
mikeSS Drives: 2015 c7 Join Date: Nov 2009 Location: MI Posts: 7,462	i mean my rubber sticks out, looks the the ZL1 tire. but those are stick out way to much.