What did you do to your 6th Gen Camaro today?! - Page 1217

bishopts · 01-03-2026, 01:46 PM

Quote:

Originally Posted by p47dman

Got a new TB the other day. Want to install it

Need to order gasket.

You dont have to replace the throttle body seal. It's very reusable.

p47dman · 01-03-2026, 06:58 PM

May very well be, but for the cost of new gasket, that will be cheap peace of mind. And as always if the gasket pulls off manifold it will stick to TB and tear when I try to scrape it off with razor blade tool.

bishopts · 01-03-2026, 07:24 PM

Quote:

Originally Posted by p47dman

May very well be, but for the cost of new gasket, that will be cheap peace of mind. And as always if the gasket pulls off manifold it will stick to TB and tear when I try to scrape it off with razor blade tool.

Its a rubber channel seal not a gasket. It's cool if you want to replace it but if you get a gasket then it's wrong.

GroundhogSS · 01-03-2026, 10:23 PM

Installed my new Mamo throttle body a few days ago. Very happy with the results. Check the Mamo thread for more comments.

https://www.camaro6.com/forums/showthread.php?t=636034

Ryanbabz71 · 01-06-2026, 11:16 AM

Decided to remove the metal plate under the super charger lid yesterday since it was pretty nice out.

We will see if there is any noticeable increase in sound.

Junction65 · 01-06-2026, 11:44 AM

Quote:

Originally Posted by p47dman

Got a new TB the other day. Want to install it

Need to order gasket.

Takes less than 15 minutes. No "gasket" needed.

Quote:

Originally Posted by bishopts

You dont have to replace the throttle body seal. It's very reusable.

^100% accurate. The seal does not stick to the TB when you take the old TB off.

I just swapped mine this past weekend. Again no "gasket" needed, just go do it.

Brewmaster · 01-06-2026, 08:44 PM

Replaced leaky Serp belt tensioner, belt and installed pulse dampener delete in 8L90 transmission.

GroundhogSS · 01-07-2026, 08:26 PM

Rolled over 99K a few days ago. I usually do pics but doing 99mph in 9th gear wouldn't work since I only have an 8 speed.

bishopts · 01-07-2026, 08:37 PM

Quote:

Originally Posted by GroundhogSS

Rolled over 99K a few days ago. I usually do pics but doing 99mph in 9th gear wouldn't work since I only have an 8 speed.

Lol nice

arpad_m · 01-07-2026, 09:08 PM

Quote:

Originally Posted by GroundhogSS

Rolled over 99K a few days ago. I usually do pics but doing 99mph in 9th gear wouldn't work since I only have an 8 speed.

Haha, time for a 10-speed swap so you can do 100 mph in 10th as you make it to 100,000 miles. For the community

*Joshinator99* · 01-07-2026, 10:31 PM

Quote:

Originally Posted by arpad_m

Haha, time for a 10-speed swap so you can do 100 mph in 10th as you make it to 100,000 miles. For the community

SOCAL.M6.ZLE · Yesterday, 10:31 AM

Bolted in my new high flow E85 kit with DYME hose and quick connects

01-03-2026, 10:23 PM	#17028
GroundhogSS Drives: '17 2SS convertible'20 Yukon Denali Join Date: Nov 2011 Location: Cedar Park, Texas Posts: 3,021	Installed my new Mamo throttle body a few days ago. Very happy with the results. Check the Mamo thread for more comments. https://www.camaro6.com/forums/showthread.php?t=636034 __________________ Richard 2017 2SS SIM convertible, A8, NPP, MRC, 56R wheels, GM CAI, Diode Dynamics Side Markers, Mamo Throttle Body Delivered: 08/15/2016 #TeamBeckyD

01-06-2026, 11:16 AM	#17029
Ryanbabz71 Drives: 2021 ZL1 1LE Satin Steel Join Date: Jul 2011 Location: Brownsburg, Indiana Posts: 6,368 View My Garage	Decided to remove the metal plate under the super charger lid yesterday since it was pretty nice out. We will see if there is any noticeable increase in sound. Attached Images __________________ Ryan 2021 ZL1 1LE Satin Steel Metallic Build Page: https://www.camaro6.com/forums/showthread.php?t=632481

01-07-2026, 08:26 PM	#17032
GroundhogSS Drives: '17 2SS convertible'20 Yukon Denali Join Date: Nov 2011 Location: Cedar Park, Texas Posts: 3,021	Rolled over 99K a few days ago. I usually do pics but doing 99mph in 9th gear wouldn't work since I only have an 8 speed. __________________ Richard 2017 2SS SIM convertible, A8, NPP, MRC, 56R wheels, GM CAI, Diode Dynamics Side Markers, Mamo Throttle Body Delivered: 08/15/2016 #TeamBeckyD

Yesterday, 10:31 AM	#17036
SOCAL.M6.ZLE Having FUN in the SUN... Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022 Location: San Diego CA Posts: 2,054	Bolted in my new high flow E85 kit with DYME hose and quick connects Attached Images __________________ 2022 M6 ZLE: GMS Stage.III KONG X.PORT Package + DMS Lid + 10.RIB Package + GMS Rear Bumper Belly Pan + GMS Hood Bracket + GMS Stage.III HX System + MONSTER Triple S Clutch + XDI.50% Injectors + CLICK FOR FULL BUILD LIST or www.GRIFFIN-MOTORSPORTS.com

01-03-2026, 06:58 PM	#17026
p47dman Drives: 2024 Camaro 1SS Join Date: Mar 2024 Location: Minnesota Posts: 337	May very well be, but for the cost of new gasket, that will be cheap peace of mind. And as always if the gasket pulls off manifold it will stick to TB and tear when I try to scrape it off with razor blade tool.

01-06-2026, 08:44 PM	#17031
Brewmaster Drives: 2017 2SS 50th Anniversary Join Date: Jan 2017 Location: Virginia Posts: 55	Replaced leaky Serp belt tensioner, belt and installed pulse dampener delete in 8L90 transmission.

User Name		Remember Me?
Password