[SOCAL.M6.ZLE]

Originally Posted by Smokin19

Just got notified my new KRNC wheels are done and shipped, just waiting for delivery info.

BRO... Can't wait to see those installed!!!

[vaeron]

Body filler in place, sanding and verifying tomorrow on the front bumper. If all is good I'll prime and prep for paint. I also pulled the rear louvers off and the spoiler has been removed in anticipation of the ZL1 1LE spoiler that is on its way. It's painted gloss black to match the car. Side skirts are also on the way, front splitter is already here. Still need to clean the rear window from the adhesive from the louvers. I'm trying to decide on a rear diffuser. Recommendations?

[arpad_m]

Originally Posted by vaeron

Body filler in place, sanding and verifying tomorrow on the front bumper. If all is good I'll prime and prep for paint. I also pulled the rear louvers off and the spoiler has been removed in anticipation of the ZL1 1LE spoiler that is on its way. It's painted gloss black to match the car. Side skirts are also on the way, front splitter is already here. Still need to clean the rear window from the adhesive from the louvers. I'm trying to decide on a rear diffuser. Recommendations?

I have this unit:
*****************/shop/exterior-body-parts/diffusers/glossy-quad-tip-diffuser-16-19-camaro (replace the asterisks with next gen speed dot com, no spaces of course)

It was a very good fit, I'd say 98-99%, and looks OEM with enhanced fins.

[2SS Capt]

Oil change day, it is a few days over a year and only 805 miles on the oil...







Far more work setting up and taking down the QuickJack than it is to do the actual oil change...

[JT6Speed]

Originally Posted by 2SS Capt

Oil change day, it is a few days over a year and only 805 miles on the oil...







Far more work setting up and taking down the QuickJack than it is to do the actual oil change...

Man if I was in SoCal you'd be able to add a zero onto the end of that mileage number lol.

I do maybe 1,200 a year, which is easy when you cant drive it for 5 months.

[sscentex]

Originally Posted by 2SS Capt

Oil change day, it is a few days over a year and only 805 miles on the oil...







Far more work setting up and taking down the QuickJack than it is to do the actual oil change...

How do you like that quickjack? I’ve been kicking the idea around for a while.

[p47dman]

OMG, I drove her 900 miles the first night I had her

[NYTMARE23]

Originally Posted by 2SS Capt

Oil change day, it is a few days over a year and only 805 miles on the oil...







Far more work setting up and taking down the QuickJack than it is to do the actual oil change...

Not that it's a good record to have, but I'm afraid I have you beat Capt..
Between May of 2025(Out of winter storage with 954 miles on the odometer (changed oil) until November 1st, 2025(Back into winter storage with 1,069 miles on the odometer). I put 115 miles on the car in 6 months... So when I go to change the oil in May of this year(2026)...It'll be 115 mile "old" oil.

[2SS Capt]

Originally Posted by sscentex

How do you like that quickjack? I’ve been kicking the idea around for a while.

I like them, a bit of a project to setup and take down... I bought the 5000SLX (Costco had a screaming deal on them) and used them without the extensions for a while but finally bought the extensions and mounted permanent ZL-1 Add-Ons lift points... Hindsight I wish I bought the longer QJ from the beginning to not need the extensions (don't "need" them, but I feel better with them)...

Here is the car lifted without the extensions, you can see that it is fairly far back to make it work but seemed stable...



Here are the Lift Point locations I am using...





Hope this helps!

Here is with the extensions... The rear lift point is the same but the forward lift point is about 6-8" further forward...



Another shot with the extensions...



When I went to the 1LE spec wheels/tires, it lowered the car just enough that getting the QJ and extensions under there with the rubber blocks was tight (hence to wood boards I drive on to give me extra clearance)



Even comes in handy on our other family vehicles...

[sscentex]

Feels secure enough to crawl underneath and work under it? Contemplating one to use for my Camaro, rzr, and the Durango.

[Ryanbabz71]

Originally Posted by sscentex

Feels secure enough to crawl underneath and work under it? Contemplating one to use for my Camaro, rzr, and the Durango.

They are plenty sturdy. Ive used mine on multiple vehicles never a concern being under the vehicle.

[d50h]

Does it matter which way you lift the car on the quick jacks?

I though the yellow sticker (instructions/label) on frame should be the drive on side ( rear of car )