WTB: SS 1LE front rotor hats

Akri · 12-13-2025, 01:37 PM

Hello,
I am looking for a pair of OEM hats used on the SS 1LE 370mm front rotors. Thanks!

2023-SS · 12-13-2025, 06:06 PM

on the FB page:

6th gen rotor hats with hardware for 150$ shipped.

https://www.facebook.com/groups/283993151976923/

DaveC113 · 12-13-2025, 08:46 PM

If you want them for DBA rings I'd skip that and go with oem rotors.

Akri · 12-14-2025, 10:03 AM

@2023-SS, thanks, I don't have a FB account but maybe a friend can check that out tonight. You aren't the seller, or?

@Dave, want to use them with Brembo rings from the Gen5 ZL1 rotors. The rings should be the same, even ZZP says so. Most aftermarket parts aren't street legal in Europe or very hard to get. And OEM rotors would be here around 2,5K with all fees and customs charges. But the Brembo Gen5 ZL1 rotors are easy to get, 500 for both.

DaveC113 · 12-14-2025, 02:56 PM

Quote:

Originally Posted by Akri

@2023-SS, thanks, I don't have a FB account but maybe a friend can check that out tonight. You aren't the seller, or?

@Dave, want to use them with Brembo rings from the Gen5 ZL1 rotors. The rings should be the same, even ZZP says so. Most aftermarket parts aren't street legal in Europe or very hard to get. And OEM rotors would be here around 2,5K with all fees and customs charges. But the Brembo Gen5 ZL1 rotors are easy to get, 500 for both.

Interesting, sounds like a good plan then. OEM rotors are $700 each here but you can get them for half that. I paid $675 a few weeks ago for both front rotors. I tried DBA to save some cash but they heat cracked much faster than OEM rotors.

You could also check Day's Parts or AZ Cycle Parts if you don't find a private seller. Maybe they have some worn-out rotors they can take the hats off to save some cash. Good luck.

Akri · 12-15-2025, 04:11 AM

Good to know, thanks!

cdb95z28 · 12-15-2025, 06:13 AM

Quote:

Originally Posted by Akri

@2023-SS, thanks, I don't have a FB account but maybe a friend can check that out tonight. You aren't the seller, or?

@Dave, want to use them with Brembo rings from the Gen5 ZL1 rotors. The rings should be the same, even ZZP says so. Most aftermarket parts aren't street legal in Europe or very hard to get. And OEM rotors would be here around 2,5K with all fees and customs charges. But the Brembo Gen5 ZL1 rotors are easy to get, 500 for both.

Gen5 ZL1 rotor rings are the same dimensions as the Gen6 SS 1LE (370mm diameter) rings. And the ZL1 rotors are side specific...better cooling opportunity.

arpad_m · 12-15-2025, 08:23 AM

Quote:

Originally Posted by cdb95z28

Gen5 ZL1 rotor rings are the same dimensions as the Gen6 SS 1LE (370mm diameter) rings. And the ZL1 rotors are side specific...better cooling opportunity.

6th gen SS 1LE rotors are also side specific, its cooling vanes have a different orientation between the driver and the passenger side.

cdb95z28 · 12-15-2025, 09:28 AM

Quote:

Originally Posted by arpad_m

6th gen SS 1LE rotors are also side specific, its cooling vanes have a different orientation between the driver and the passenger side.

I stand corrected! Thank You. My notes were incomplete

LF, #23142500, AC Delco #177-1193
RF, #23189768, AC Delco #177-1194

2023-SS · 12-16-2025, 08:58 PM

Quote:

Originally Posted by Akri

@2023-SS, thanks, I don't have a FB account but maybe a friend can check that out tonight. You aren't the seller, or?

not seller, i posted a link to this page on that guys FB post.

i agree on not having FB, too much drama.

Akri · 12-16-2025, 11:53 PM

@cdb and arpad, thanks for the confirmation.

Quote:

Originally Posted by 2023-SS

not seller, i posted a link to this page on that guys FB post.

Have messaged him yesterday, thanks!

arpad_m · 12-17-2025, 12:14 AM

Quote:

Originally Posted by cdb95z28

I stand corrected! Thank You. My notes were incomplete

LF, #23142500, AC Delco #177-1193
RF, #23189768, AC Delco #177-1194

Ah great, thanks, I should've posted up these part numbers. Got a nice bunch of them collected over the years, see below

Alas, GM kept changing them, but perhaps not so much anymore.

Quote:

Originally Posted by Akri

@cdb and arpad, thanks for the confirmation.

badls1 · 12-17-2025, 08:24 AM

Hi, I have a set SS 1LE front rooter hats. Send me an offer. I see your location is marked in Germany, is that correct?

Akri · 12-18-2025, 12:42 AM

Yes, the location is correct. I'm already in contact with the other seller, if we shouldn't come to an agreement I'll message you, thanks!

12-13-2025, 08:46 PM	#3
DaveC113 Drives: 2018 Camaro 1SS 1LE Join Date: Sep 2018 Location: Front Range, CO Posts: 2,204	If you want them for DBA rings I'd skip that and go with oem rotors. __________________

12-13-2025, 01:37 PM	#1
Akri Drives: 2018 2SS Join Date: Dec 2025 Location: Germany Posts: 5	WTB: SS 1LE front rotor hats Hello, I am looking for a pair of OEM hats used on the SS 1LE 370mm front rotors. Thanks!

12-13-2025, 06:06 PM	#2
2023-SS Drives: 2023 SS Join Date: Nov 2025 Location: Charleston SC Posts: 35	on the FB page: 6th gen rotor hats with hardware for 150$ shipped. https://www.facebook.com/groups/283993151976923/

12-14-2025, 10:03 AM	#4
Akri Drives: 2018 2SS Join Date: Dec 2025 Location: Germany Posts: 5	@2023-SS, thanks, I don't have a FB account but maybe a friend can check that out tonight. You aren't the seller, or? @Dave, want to use them with Brembo rings from the Gen5 ZL1 rotors. The rings should be the same, even ZZP says so. Most aftermarket parts aren't street legal in Europe or very hard to get. And OEM rotors would be here around 2,5K with all fees and customs charges. But the Brembo Gen5 ZL1 rotors are easy to get, 500 for both.

12-15-2025, 04:11 AM	#6
Akri Drives: 2018 2SS Join Date: Dec 2025 Location: Germany Posts: 5	Good to know, thanks!

12-17-2025, 08:24 AM	#13
badls1 Drives: 2019 SS 1LE MCS, SPL, V5-RS, FBO Join Date: Aug 2020 Location: North Hollywood Posts: 35	Hi, I have a set SS 1LE front rooter hats. Send me an offer. I see your location is marked in Germany, is that correct?

12-18-2025, 12:42 AM	#14
Akri Drives: 2018 2SS Join Date: Dec 2025 Location: Germany Posts: 5	Yes, the location is correct. I'm already in contact with the other seller, if we shouldn't come to an agreement I'll message you, thanks!

User Name		Remember Me?
Password