New 2023 ZL1 should I change out parts already? - Page 51

SOCAL.M6.ZLE · 11-20-2025, 09:03 PM

Bad ass for sure! Looking forward to seeing her all back together!!!

2023_ZL1-AUTO · 11-24-2025, 12:53 PM

Update: Gabe: Me too bro ! Now that's a big lid! This is the billet lid I went with !

SOCAL.M6.ZLE · 11-24-2025, 02:50 PM

Quote:

Originally Posted by 2023_ZL1-AUTO

Update: Gabe: Me too bro ! Now that's a big lid! This is the billet lid I went with !

So sexy... cannot go wrong with the entire Too High PSI catalog thats for sure!!!

SOCAL.M6.ZLE · 11-24-2025, 02:51 PM

Can't wait to see 1,xxx rwhp !!!

*Joshinator99* · 11-24-2025, 06:51 PM

Quote:

Originally Posted by SOCAL.M6.ZLE

Can't wait to see 1,xxx rwhp !!!

He better get 1K WHP plus or else.. ban!

Just kidding Scott! But you definitely need to bring that dyno slip home after such a great build.

2023_ZL1-AUTO · 11-25-2025, 06:24 AM

Quote:

Originally Posted by Joshinator99

He better get 1K WHP plus or else.. ban!

Just kidding Scott! But you definitely need to bring that dyno slip home after such a great build.

I'm not KIDDING either!!! Well I meant to the 1000+ (not the ban part) !! I've been told! Hehehe... They are going to VIDEO the DYNO pulls !!!!!

If we don't get 1K WHP... maybe we ban KATECH_MIKE !!!

HAHAHA

2023_ZL1-AUTO · 12-03-2025, 01:15 PM

Update: The New intercooler pump finally showed up, now they can install it, and then the drive train goes back in ! Also the DSX Aux pump and filter has arrived!

2023_ZL1-AUTO · 12-05-2025, 08:51 AM

Update: Intercooler Pump fitted for clearance... not a lot of room is there!

2023_ZL1-AUTO · 12-15-2025, 04:25 PM

Update: Alex at Katech updated me: They are lowering the body and ready to reinstall the drive train, reconnect wiring harness, reinstall new chromoly drive shaft, headers and exhaust and mufflers, and install the Maggie 2650! This will hopefully be tomorrows work! They new CWA400 intercooler pump looks quite large in that space, but they said they have it fitting fine! Getting pretty excited now!

https://youtube.com/shorts/cnYLPrk0BgQ

SOCAL.M6.ZLE · 12-16-2025, 12:24 AM

BRO... time to start updating that signature my friend! can't wait to hear that CHOP baby!!!

2023_ZL1-AUTO · 12-16-2025, 01:35 PM

Update: Good progress so far this week. BIG BOX was opened and wow is it a work of art !!! Getting exciting again! Also the proof of the custom parachute lockout tags I'm ordering !

https://youtube.com/shorts/ceTlhx2_XbA?feature=share

hrpiii · 12-17-2025, 08:14 AM

That is just insane and gorgeous at the same time!

RobZL1 · 12-17-2025, 09:23 AM

Quote:

Originally Posted by hrpiii

That is just insane and gorgeous at the same time!

The same way I like my women.

SOCAL.M6.ZLE · 12-17-2025, 10:31 AM

I cannot believe they got that CWA400 to fit tin the same location!!! Well done!@

11-20-2025, 09:03 PM	#701
SOCAL.M6.ZLE Having FUN in the SUN... Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022 Location: San Diego CA Posts: 2,056	Bad ass for sure! Looking forward to seeing her all back together!!! __________________ 2022 M6 ZLE: GMS Stage.III KONG X.PORT Package + DMS Lid + 10.RIB Package + GMS Rear Bumper Belly Pan + GMS Hood Bracket + GMS Stage.III HX System + MONSTER Triple S Clutch + XDI.50% Injectors + CLICK FOR FULL BUILD LIST or www.GRIFFIN-MOTORSPORTS.com

11-24-2025, 12:53 PM	#702
2023_ZL1-AUTO Drives: 2023 ZL1 - All Bolt On's Join Date: Dec 2022 Location: Columbus, Ohio Posts: 1,188	Update: Gabe: Me too bro ! Now that's a big lid! This is the billet lid I went with ! Attached Images __________________ 2023 ZL1 A10-Stainless Works 2" Long Tubes & Legend NPP Axle Back•GESI UHO 4.5" CATs•RF BigGulp•Kong 103mm & X-Ported Blower•Griptech 2.30" Upper•ATI Super Damper w/9.45" Lower•THPSI Port Injection w/875cc Injectors•FI Interchillers Stage 2•Brisk RR14S Plugs•Granatelli Malevolent Coils•Katech Low Profile Billet Valve Covers•Katech Duel Fuel Pump•MM Wild 1000HP•DSX Flex Fuel Kit•DSX Billet Lid•DMS 2gal Fender Tank•BMR Cradle Lockout•Weld Solana 18x8 Fronts/17x10 Beadlocks MT ET ST R's•Unlocked TCM•E85=785rwhp/691rwtq +21psi \| 1/4=10.5005 @134.21 60ft=1.6182, 1/8=6.8373 @106.11

11-24-2025, 02:51 PM	#704
SOCAL.M6.ZLE Having FUN in the SUN... Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022 Location: San Diego CA Posts: 2,056	Can't wait to see 1,xxx rwhp !!! __________________ 2022 M6 ZLE: GMS Stage.III KONG X.PORT Package + DMS Lid + 10.RIB Package + GMS Rear Bumper Belly Pan + GMS Hood Bracket + GMS Stage.III HX System + MONSTER Triple S Clutch + XDI.50% Injectors + CLICK FOR FULL BUILD LIST or www.GRIFFIN-MOTORSPORTS.com

12-03-2025, 01:15 PM	#707
2023_ZL1-AUTO Drives: 2023 ZL1 - All Bolt On's Join Date: Dec 2022 Location: Columbus, Ohio Posts: 1,188	Update: The New intercooler pump finally showed up, now they can install it, and then the drive train goes back in ! Also the DSX Aux pump and filter has arrived! Attached Images __________________ 2023 ZL1 A10-Stainless Works 2" Long Tubes & Legend NPP Axle Back•GESI UHO 4.5" CATs•RF BigGulp•Kong 103mm & X-Ported Blower•Griptech 2.30" Upper•ATI Super Damper w/9.45" Lower•THPSI Port Injection w/875cc Injectors•FI Interchillers Stage 2•Brisk RR14S Plugs•Granatelli Malevolent Coils•Katech Low Profile Billet Valve Covers•Katech Duel Fuel Pump•MM Wild 1000HP•DSX Flex Fuel Kit•DSX Billet Lid•DMS 2gal Fender Tank•BMR Cradle Lockout•Weld Solana 18x8 Fronts/17x10 Beadlocks MT ET ST R's•Unlocked TCM•E85=785rwhp/691rwtq +21psi \| 1/4=10.5005 @134.21 60ft=1.6182, 1/8=6.8373 @106.11

12-05-2025, 08:51 AM	#708
2023_ZL1-AUTO Drives: 2023 ZL1 - All Bolt On's Join Date: Dec 2022 Location: Columbus, Ohio Posts: 1,188	Update: Intercooler Pump fitted for clearance... not a lot of room is there! Attached Images __________________ 2023 ZL1 A10-Stainless Works 2" Long Tubes & Legend NPP Axle Back•GESI UHO 4.5" CATs•RF BigGulp•Kong 103mm & X-Ported Blower•Griptech 2.30" Upper•ATI Super Damper w/9.45" Lower•THPSI Port Injection w/875cc Injectors•FI Interchillers Stage 2•Brisk RR14S Plugs•Granatelli Malevolent Coils•Katech Low Profile Billet Valve Covers•Katech Duel Fuel Pump•MM Wild 1000HP•DSX Flex Fuel Kit•DSX Billet Lid•DMS 2gal Fender Tank•BMR Cradle Lockout•Weld Solana 18x8 Fronts/17x10 Beadlocks MT ET ST R's•Unlocked TCM•E85=785rwhp/691rwtq +21psi \| 1/4=10.5005 @134.21 60ft=1.6182, 1/8=6.8373 @106.11

12-15-2025, 04:25 PM	#709
2023_ZL1-AUTO Drives: 2023 ZL1 - All Bolt On's Join Date: Dec 2022 Location: Columbus, Ohio Posts: 1,188	Update: Alex at Katech updated me: They are lowering the body and ready to reinstall the drive train, reconnect wiring harness, reinstall new chromoly drive shaft, headers and exhaust and mufflers, and install the Maggie 2650! This will hopefully be tomorrows work! They new CWA400 intercooler pump looks quite large in that space, but they said they have it fitting fine! Getting pretty excited now! https://youtube.com/shorts/cnYLPrk0BgQ Attached Images __________________ 2023 ZL1 A10-Stainless Works 2" Long Tubes & Legend NPP Axle Back•GESI UHO 4.5" CATs•RF BigGulp•Kong 103mm & X-Ported Blower•Griptech 2.30" Upper•ATI Super Damper w/9.45" Lower•THPSI Port Injection w/875cc Injectors•FI Interchillers Stage 2•Brisk RR14S Plugs•Granatelli Malevolent Coils•Katech Low Profile Billet Valve Covers•Katech Duel Fuel Pump•MM Wild 1000HP•DSX Flex Fuel Kit•DSX Billet Lid•DMS 2gal Fender Tank•BMR Cradle Lockout•Weld Solana 18x8 Fronts/17x10 Beadlocks MT ET ST R's•Unlocked TCM•E85=785rwhp/691rwtq +21psi \| 1/4=10.5005 @134.21 60ft=1.6182, 1/8=6.8373 @106.11

12-16-2025, 12:24 AM	#710
SOCAL.M6.ZLE Having FUN in the SUN... Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022 Location: San Diego CA Posts: 2,056	BRO... time to start updating that signature my friend! can't wait to hear that CHOP baby!!! __________________ 2022 M6 ZLE: GMS Stage.III KONG X.PORT Package + DMS Lid + 10.RIB Package + GMS Rear Bumper Belly Pan + GMS Hood Bracket + GMS Stage.III HX System + MONSTER Triple S Clutch + XDI.50% Injectors + CLICK FOR FULL BUILD LIST or www.GRIFFIN-MOTORSPORTS.com

12-16-2025, 01:35 PM	#711
2023_ZL1-AUTO Drives: 2023 ZL1 - All Bolt On's Join Date: Dec 2022 Location: Columbus, Ohio Posts: 1,188	Update: Good progress so far this week. BIG BOX was opened and wow is it a work of art !!! Getting exciting again! Also the proof of the custom parachute lockout tags I'm ordering ! https://youtube.com/shorts/ceTlhx2_XbA?feature=share Attached Images __________________ 2023 ZL1 A10-Stainless Works 2" Long Tubes & Legend NPP Axle Back•GESI UHO 4.5" CATs•RF BigGulp•Kong 103mm & X-Ported Blower•Griptech 2.30" Upper•ATI Super Damper w/9.45" Lower•THPSI Port Injection w/875cc Injectors•FI Interchillers Stage 2•Brisk RR14S Plugs•Granatelli Malevolent Coils•Katech Low Profile Billet Valve Covers•Katech Duel Fuel Pump•MM Wild 1000HP•DSX Flex Fuel Kit•DSX Billet Lid•DMS 2gal Fender Tank•BMR Cradle Lockout•Weld Solana 18x8 Fronts/17x10 Beadlocks MT ET ST R's•Unlocked TCM•E85=785rwhp/691rwtq +21psi \| 1/4=10.5005 @134.21 60ft=1.6182, 1/8=6.8373 @106.11 Last edited by 2023_ZL1-AUTO; 12-16-2025 at 02:45 PM.

12-17-2025, 08:14 AM	#712
hrpiii AKA "Beefcake" Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009 Location: Indy Posts: 8,570	That is just insane and gorgeous at the same time!

12-17-2025, 10:31 AM	#714
SOCAL.M6.ZLE Having FUN in the SUN... Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022 Location: San Diego CA Posts: 2,056	I cannot believe they got that CWA400 to fit tin the same location!!! Well done!@ __________________ 2022 M6 ZLE: GMS Stage.III KONG X.PORT Package + DMS Lid + 10.RIB Package + GMS Rear Bumper Belly Pan + GMS Hood Bracket + GMS Stage.III HX System + MONSTER Triple S Clutch + XDI.50% Injectors + CLICK FOR FULL BUILD LIST or www.GRIFFIN-MOTORSPORTS.com

User Name		Remember Me?
Password