|
|
#1 |
![]() Drives: 2017 ss convertible Join Date: Dec 2015
Location: dixon Il.
Posts: 17
|
Move a 17 Camaro without starting the car
I have a 17 Camaro SS and I will have it in my shed stored and I like to move it ahead 2 feet but I do not want to start it. Obviously it’s an automatic. How can I do? That battery is good. No problems with it I just don’t wanna start it. Thank you.
|
|
|
|
|
|
#2 |
|
2020 Shadow Gray 2SS
Drives: 2020 2SS - A10, NPP, MRC, CAI Join Date: Dec 2019
Location: SoCal
Posts: 3,692
|
Keep your foot off the brake and push the start button twice... Once the dash lights up, push the brake and shift into neutral... Move the car as you wish, get back in and put it in park and hit the start button one more time to put the car back to sleep (without your foot on the brake)...
__________________
2020 SGM 2SS - A10, NPP, MRC, Red Calipers, Black Fender Badge, Footwell Lighting
After delivery: - GMP CAI, GMP Black Strut Tower Brace, MRR017 1LE Wheels, SS Armrest, Black Fuel Door, Stainless Pedals, SS Wheel Caps, GM Splash Guards, DD Smoked LED Markers, Smoked Rear Reflectors, Mishimoto Catch Can, Xpel PPF-Full Front & Rockers, 35% Tint, CeramicPro coated, RST Stainless Brake Lines, Castrol SRF, MSD Plug Wires, Mamo V3 Ported TB Left: My "fun" ride (455 HP). Right: My "work" ride (52,000 HP): a Gulfstream G600. One's top speed is 180 Mph, the other, 620 Mph. BOTH AWESOME to operate... |
|
|
|
|
|
#3 | |
|
Moderator
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 6,204
|
Quote:
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, ATI 8L90, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors & BB HPFP, TooHighPSI/Katech port injection, 15” conversion 1066 WHP STD/1027 SAE, 9.10@152.5 (new times coming)
|
|
|
|
|
|
|
#4 |
![]() ![]() Drives: 2017 2ss 6mt Join Date: Mar 2024
Location: dallas
Posts: 954
|
None of my GM vehicles do that. First press will say "hold brake to start" or clutch if it's the camaro. Second press will just turn it back off.
I have to hold the start button without pressing the brake for about 6 seconds and then it will cycle the ignition on. |
|
|
|
|
|
#5 |
|
Drives: 2021 ZLE, C5 Z06 6.0L Procharged Join Date: Mar 2023
Location: South Carolina
Posts: 466
|
You may have to press the start button and HOLD it for 10-15 seconds without pressing the brake. This will unlock the the transmission so it can be shifted. You then can hold the brake and shift it to park when done without starting the engine. This is what I have to do each time I winch it into the trailer, using a broomstick with a rubber cap on it to apply the brake without getting into the car.
|
|
|
|
|
|
#6 |
![]() ![]() Drives: 2017 Camaro SS 1LE (F1A-94 FBO H/C) Join Date: Jun 2017
Location: San Antonio Texas
Posts: 844
|
you should get some wheel dollies to jack up and move around where/as you please. they come in great handy, use them in my shop all the time.
__________________
Performance Mods: F1A-94, DSX Flex Fuel Kit, MSD Spark Plug Wires, KOOK 2" off road headers, MBRP Race catback exhaust, Pray Performance Custom Boost Cam, Rocker Arm Trunion Upgrade Kit, 7.850" Hardened Chromemoly Length Pushrods and Johnson Racing 2110R Lifters, TSP CNC'd Heads, Ported MSD intake manifold, 103mm Katech Throttle body, Forged Pistons/Rods, RPM Meth kit, DSX Aux Fuel system, AEM Failsafe and banks gauge, LT4 HPFP, LT4 injectors, BMR motor mounts, Hurst Short Throw, Manley SS exhaust valves
Videos of my car? Check here: https://www.youtube.com/channel/UCNi...Qy1OL4NVGlPogw |
|
|
|
|
|
#7 | |
![]() Drives: LT1 Join Date: Apr 2024
Location: AZ
Posts: 301
|
Quote:
|
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|