What did you do to your 6th Gen Camaro today?! - Page 1211

Snake_Eyes · 11-17-2025, 02:46 PM

Quote:

Originally Posted by GroundhogSS

What's the specs on the replacement bolts you used? I took one of them to Home Depot and couldn't find a match. Did you have to go to a specialty hardware store? I put the bracket under the tower brace. A little harder to empty but out of the way.

M8 1.25. Original was 20mm long, replaced it with a 25. My Ace hardware down the street has an extensive fastener section. The stock bolts were galvanized but I ended up with stainless. I forgot to mention that I added a 2mm spacer between the bottom of the cross brace and the top of the shock tower since the lower mounting point of the cross brace was raised by 2mm from the thickness of the catch can mounting plate.

SS_Don · 11-17-2025, 02:48 PM

Quote:

Originally Posted by Snake_Eyes

Noticed that coolant was low and since I had to remove the cross brace to get to the lower reservoir filler, I decided to install a Mishimoto catch can.

I'm not sure if the cross brace was designed that way, but the shock tower bolts are reused, and they are just long enough to grip a couple of threads, and with the 2mm thick Mishimoto mount plate added to the mix I stripped out the top 2ish threads of the bolt hole. Fortunately, I was able to run a tap in and fix those couple of threads. Got a couple of 5mm longer bolts and it's all good.

Strange. I installed the Mishimoto CC and didn't have any issues with the bolts.

Ryanbabz71 · 11-17-2025, 08:08 PM

Last drive of 2025?

speedyink1 · 11-18-2025, 07:41 PM

Drove it.

I know, sounds like nothing, but that means a lot in November... Looking like I can drive it tomorrow too

After that...

sactownbwoy · 11-22-2025, 02:22 PM

Putting new brake pads on the wife's Telluride and my ZLE.

Invertalon · 11-22-2025, 03:27 PM

Wash, filled the tank (w/ Stabilizer) and did the oil change. It's officially done for 2025

Hary Gahtoe · 11-22-2025, 10:26 PM

Quote:

Originally Posted by sactownbwoy

Putting new brake pads on the wife's Telluride and my ZLE.

Jinx!
Excellent choice
I put the 2nd set of Evo pads and high carbon Hella rotors on my wife's Allroad last week. Low pedal effort, good feel and next to no dust.

sscentex · 11-22-2025, 11:14 PM

Been staring at it since Wednesday. Probably won’t pull it out until Tuesday when it goes in for an exhaust.

sscentex · 11-25-2025, 05:13 PM

Had some Black Widow Neighbor Haters installed on it. They sound good but are pretty loud inside between 1700-2000rpm. Gonna drive it for a few days before I decide whether or not to have a j-pipe installed or just swap the mufflers out for something else.

Also bought a set of stock taillights. They aren't smoked but I don't care. I need this random rapid flashing thing out of my life.

beowulf556 · 11-25-2025, 05:29 PM

Replaced the battery. Nothing exciting.

sactownbwoy · 11-25-2025, 05:49 PM

Roto-fab coolant cover installed and getting a hood prop and door props made.

sactownbwoy · 11-29-2025, 11:01 PM

Washed and added a decal to the quarter panel. Taking my brother-in-law from Canada to a Chevy vs Ford cars and coffe tomorrow.

Ryanbabz71 · 11-30-2025, 06:42 PM

Cleaned some alcantra

Sent from my iPhone using Tapatalk Pro

GroundhogSS · 12-04-2025, 02:27 PM

Rolled over 98,000. Probably 100K in the spring. Don't remember how to flip the pics upright.

Name: 20251121_134106a.jpg
Views: 87
Size: 237.3 KB

11-17-2025, 08:08 PM	#16943
Ryanbabz71 Drives: 2021 ZL1 1LE Satin Steel Join Date: Jul 2011 Location: Brownsburg, Indiana Posts: 6,368 View My Garage	Last drive of 2025? Attached Images __________________ Ryan 2021 ZL1 1LE Satin Steel Metallic Build Page: https://www.camaro6.com/forums/showthread.php?t=632481

11-22-2025, 02:22 PM	#16945
sactownbwoy Drives: '22 Camaro ZL1 1LE A10 Join Date: Jul 2021 Location: SoCal Posts: 366	Putting new brake pads on the wife's Telluride and my ZLE. Attached Images

11-22-2025, 11:14 PM	#16948
sscentex Drives: 2016 Camaro SS Join Date: Oct 2025 Location: Central Texas Posts: 66	Been staring at it since Wednesday. Probably won’t pull it out until Tuesday when it goes in for an exhaust. __________________ 2016 Camaro SS

11-25-2025, 05:13 PM	#16949
sscentex Drives: 2016 Camaro SS Join Date: Oct 2025 Location: Central Texas Posts: 66	Had some Black Widow Neighbor Haters installed on it. They sound good but are pretty loud inside between 1700-2000rpm. Gonna drive it for a few days before I decide whether or not to have a j-pipe installed or just swap the mufflers out for something else. Also bought a set of stock taillights. They aren't smoked but I don't care. I need this random rapid flashing thing out of my life. __________________ 2016 Camaro SS

11-25-2025, 05:29 PM	#16950
beowulf556 Drives: Camaro SS 1LE M6 Join Date: Feb 2024 Location: Las Vegas Posts: 352	Replaced the battery. Nothing exciting. __________________ 2018 Camaro SS 1LE M6 Stainless Works Headers & X pipe \| Redline Axleback \| E85 \| Rotofab \| Soler Ported TB \| LT2 Manifold

11-18-2025, 07:41 PM	#16944
speedyink1 Drives: 2023 Camaro 1SS 1LE 6MT Join Date: Nov 2023 Location: Vancouver Island Posts: 552	Drove it. I know, sounds like nothing, but that means a lot in November... Looking like I can drive it tomorrow too After that...

11-22-2025, 03:27 PM	#16946
Invertalon Drives: 2021 2SS Join Date: Jul 2020 Location: Cleveland Posts: 303	Wash, filled the tank (w/ Stabilizer) and did the oil change. It's officially done for 2025

11-25-2025, 05:49 PM	#16951
sactownbwoy Drives: '22 Camaro ZL1 1LE A10 Join Date: Jul 2021 Location: SoCal Posts: 366	Roto-fab coolant cover installed and getting a hood prop and door props made. Attached Images

11-29-2025, 11:01 PM	#16952
sactownbwoy Drives: '22 Camaro ZL1 1LE A10 Join Date: Jul 2021 Location: SoCal Posts: 366	Washed and added a decal to the quarter panel. Taking my brother-in-law from Canada to a Chevy vs Ford cars and coffe tomorrow. Attached Images

11-30-2025, 06:42 PM	#16953
Ryanbabz71 Drives: 2021 ZL1 1LE Satin Steel Join Date: Jul 2011 Location: Brownsburg, Indiana Posts: 6,368 View My Garage	Cleaned some alcantra Sent from my iPhone using Tapatalk Pro __________________ Ryan 2021 ZL1 1LE Satin Steel Metallic Build Page: https://www.camaro6.com/forums/showthread.php?t=632481

12-04-2025, 02:27 PM	#16954
GroundhogSS Drives: '17 2SS convertible'20 Yukon Denali Join Date: Nov 2011 Location: Cedar Park, Texas Posts: 3,021	Rolled over 98,000. Probably 100K in the spring. Don't remember how to flip the pics upright. __________________ Richard 2017 2SS SIM convertible, A8, NPP, MRC, 56R wheels, GM CAI, Diode Dynamics Side Markers, Mamo Throttle Body Delivered: 08/15/2016 #TeamBeckyD

User Name		Remember Me?
Password