[LiqTenExp]

Originally Posted by arpad_m

...who knows what our buddy keeps in the trunk for maximum traction on his million hp monster ZL1—could be sandbags, could be lead

A few laps around lime rock will do it Also got air over the up hill section in the rear, definitely pushed the suspension hard

This was before I got all the BMR stuff back there so it may not have happened with them.

[radz28]

Thanks for the explanation!

[JT Camaro]

Originally Posted by LiqTenExp

A few laps around lime rock will do it Also got air over the up hill section in the rear, definitely pushed the suspension hard

This was before I got all the BMR stuff back there so it may not have happened with them.

Appreciate the info...debating if I want to move the harness before I start tracking the ZLE next season

[Mark R]

Originally Posted by LiqTenExp

A few laps around lime rock will do it Also got air over the up hill section in the rear, definitely pushed the suspension hard

This was before I got all the BMR stuff back there so it may not have happened with them.

What BMR stuff did you get and how do you like it?

[LiqTenExp]

Control arms, upper/lower trailing arms, toe rods, and rear cradle lockout.

Plenty of reviews on these things, make a world of difference in the rear.

[KILLA BEE]

Originally Posted by JT Camaro

im amazed you rubbed on stock tires..makes no sense

Something do t sound right at all with that

[Bolt on]

Does anyone know what this harness is called I burned through mines

[2023_ZL1-AUTO]

Originally Posted by radz28

Thanks for the post. I'm going to be doing this soon myself for some Mickeys.

Did you use heat to flatten the liner or something like that?

radZ28, for Mickey's? What size are you going to run? I didn't do the 15" conversion. But I'm running the 17x10 Weld Solana Beadlock rears with 305/45/17 Mickey Thompson ET Street R and didn't need to modify anything, not even spacers or longer wheel studs. I love the fitment of these on my 2023 ZL1 !