What did you do to your 6th Gen Camaro today?! - Page 1203

2SS Capt · 09-22-2025, 12:01 AM

Quote:

Originally Posted by pitrott1

Finished fuel rail covers and plenum cover in Vivid Orange Metallic.

Wow! Nice Job!!!

clg82 · 09-22-2025, 07:14 AM

Quote:

Originally Posted by david_acm

Thought I accidentally clicked on the Sponsors Classifieds section of the forum for a second there.

That's SoCal for you, dudes a walking infomercial.

david_acm · 09-22-2025, 01:54 PM

I'm all for the product, that was just a long banner to scroll past.

SS_Don · 09-22-2025, 04:03 PM

Not what I did to the car but what I did with the car. Drove from Lond Island to Hilton Head, SC. Spent 5 days there and drove back. Believe it or not I got 27.5 miles to the gallon. Thats with A/C on, doing 70-85 MPH, and locked in V8 mode.

STYLO LT1 · 09-23-2025, 01:12 AM

P3 Gauge. Love the overall clean look of it, functionality, and install. P3 also provides excellent customer service when needed.

Name: IMG_3975.jpg
Views: 330
Size: 93.0 KB

vaeron · 09-26-2025, 01:55 AM

Was yesterday but continued into today, noticed the strut tower bolt was stripped when I pulled the strut tower brace off to do some work so had to get a new bolt and use a thread chaser to fix the internal threads on the tower. Couldn't do that till this morning, but also changed the oil for the first time since getting it and added a valved oil drain plug so I can change the oil easier. Cleaned out the oil catch can as well and had some but not a ton of oil in the can so it did its job after 1500 miles.

Jpknj · 09-26-2025, 09:23 PM

Installed BMR rear cradle lockout kit today. Wow really impressed with how straight it launches now. Will try in track mode tomorrow but in sport mode really felt much better.

SSShark · 09-27-2025, 02:27 PM

Refreshed the ceramic coating this morning along with the weekly engine compartment wipe down. First I did a strip wash, then I finished up with Adams Mega wash. Nice and shiny again.
Also, running with the stock wheels while the M017's are out for powder coat.

Enslaved · 09-27-2025, 02:57 PM

Quote:

Originally Posted by SSShark

Refreshed the ceramic coating this morning along with the weekly engine compartment wipe down. First I did a strip wash, then I finished up with Adams Mega wash. Nice and shiny again.
Also, running with the stock wheels while the M017's are out for powder coat.

Super clean! Looks great man.

I'm a HUGE fan of the lt2 Intake cover. Looks so aggressive.

SSShark · 09-27-2025, 03:06 PM

Quote:

Originally Posted by Enslaved

Super clean! Looks great man.

I'm a HUGE fan of the lt2 Intake cover. Looks so aggressive.

Thanks man.

I love getting out there on Saturday mornings and doing my thing. And yes, I agree, the LT2 intake actually looks pretty darn good with the stock fuel rail covers

2SS Capt · 09-27-2025, 04:28 PM

Quote:

Originally Posted by SSShark

Refreshed the ceramic coating this morning along with the weekly engine compartment wipe down. First I did a strip wash, then I finished up with Adams Mega wash. Nice and shiny again.
Also, running with the stock wheels while the M017's are out for powder coat.

Looks awesome, what color are you having the MRR017's powder coated?

SSShark · 09-27-2025, 04:35 PM

Quote:

Originally Posted by 2SS Capt

Looks awesome, what color are you having the MRR017's powder coated?

Thanks Capt! I'm having them done in satin black to match the splitter, side skirts and spoiler.

vaeron · 09-27-2025, 05:26 PM

Quote:

Originally Posted by SSShark

Thanks Capt! I'm having them done in satin black to match the splitter, side skirts and spoiler.

Nice! That's what I did mine in for the same reasons (except for now it's the louvers and spoiler). Adding the rear diffuser, front splitter, and side skirts over the winter.

SSShark · 09-27-2025, 05:53 PM

Quote:

Originally Posted by vaeron

Nice! That's what I did mine in for the same reasons (except for now it's the louvers and spoiler). Adding the rear diffuser, front splitter, and side skirts over the winter.

Thanks. You have a very nice ride. It going to look sinister with all that black. Plus, the silver wheels give it some good contrast.

09-22-2025, 04:03 PM	#16832
SS_Don Drives: '22 Camaro 2SS Join Date: Dec 2021 Location: Long Island, NY Posts: 1,439 View My Garage	Not what I did to the car but what I did with the car. Drove from Lond Island to Hilton Head, SC. Spent 5 days there and drove back. Believe it or not I got 27.5 miles to the gallon. Thats with A/C on, doing 70-85 MPH, and locked in V8 mode. __________________ '22 2SS \| Wild Cherry Tintcoat \| Design Package 3 \| NPP \| MRC \| A10 \| NAV \| Ceramic Coating \| Full Frontal PPF \| New Hood and Side Stripes \| Michelin PS AS 4 \| Range AFM Disabler Mishimoto Catch Can \| Diode Dynamics side markers \| Cold Air Inductions CAI \| LLoyd Velourtex front/trunk mats with Camaro SS logo \| Footwell Lighting \| Umbra Sequential LED Taillights ZL1addons Deluxe Rock Guards, Stealth Lift Pads, and Tow Hook \| Escort MAXcam360c \| Banks Data Pro and Pro gauges in ZZPerformance pillar pod \| Paddle shifter extensions

09-26-2025, 01:55 AM	#16834
vaeron Drives: 2016 Camaro 2SS Join Date: May 2025 Location: Washington State Posts: 43	Was yesterday but continued into today, noticed the strut tower bolt was stripped when I pulled the strut tower brace off to do some work so had to get a new bolt and use a thread chaser to fix the internal threads on the tower. Couldn't do that till this morning, but also changed the oil for the first time since getting it and added a valved oil drain plug so I can change the oil easier. Cleaned out the oil catch can as well and had some but not a ton of oil in the can so it did its job after 1500 miles. __________________ 2016 Black 2SS purchased in May 2025, 6 Spd. GM Performance Strut Tower Brace, Mishimoto Oil Catch Can, MRR M017 wheels, powder coated in satin black, Continental Extreme Contact DSW06 285/30R20 in the front and 305/30R20 in the rear.

09-26-2025, 09:23 PM	#16835
Jpknj Drives: Chevy ZL1 Join Date: Nov 2021 Location: NJ Posts: 36	Installed BMR rear cradle lockout kit today. Wow really impressed with how straight it launches now. Will try in track mode tomorrow but in sport mode really felt much better. __________________ 2022 ZL1 Never Should Have Sold List 1984 Z28 1976 Type LT 1970 RS

09-27-2025, 02:27 PM	#16836
SSShark Drives: '23 1SS Sharkskin A10 Join Date: Sep 2018 Location: South Florida Posts: 1,503	Refreshed the ceramic coating this morning along with the weekly engine compartment wipe down. First I did a strip wash, then I finished up with Adams Mega wash. Nice and shiny again. Also, running with the stock wheels while the M017's are out for powder coat. Attached Images __________________ Kooks 1-7/8" Long Tube Headers l Kooks Hi-Flow Cats l Kooks X-Pipe l Borla S-Type NPP Exhaust Rotofab CAI l Mishimoto Catch Can l DSX Flex Fuel Sensor l 93/E85 Tune l GM Lowering Kit Ported LT2 Intake Manifold l Ported 95mm LT5 TB l BMR Rear Cradle Lockout Kit Halo Tunnel Brace l MRR 1LE Wheels l Goodyear SC3 1LE Tire Package l 480whp/467wtq

09-22-2025, 01:54 PM	#16831
david_acm Drives: LT1 Join Date: Mar 2022 Location: Florida Posts: 254	I'm all for the product, that was just a long banner to scroll past.

09-23-2025, 01:12 AM	#16833
STYLO LT1 Drives: 2016 Camaro SS Vert. Join Date: Apr 2017 Location: Garden State Posts: 546	P3 Gauge. Love the overall clean look of it, functionality, and install. P3 also provides excellent customer service when needed.

User Name		Remember Me?
Password