[Enslaved]

Originally Posted by KingLT1

You have to tear the engine down to the shortblock to install a cam so you might as well do pistons at the same time and save a chunk in labor.

Far as meth injection, it's better than only running pump gas, not as good as blending E. You get much better distribution spraying high octane fuel like E through 8 injectors vs spraying a single nozzle of methanol in front of the throttle body. As long as you are not using it as supplemental fuel and more for octane and cooling it should be fine. I would run methanol injection a little richer to account for the leaner cylinders.

Logical. I'm the loser doing the labor, so no costs associated there

Whats the typical 'all in cost' of a complete port injection setup? brand preference? (still curous on meth kit brand preference).

[Joshinator99]

Originally Posted by Enslaved

Logical. I'm the loser doing the labor, so no costs associated there

Whats the typical 'all in cost' of a complete port injection setup? brand preference? (still curous on meth kit brand preference).

TooHighPSI has a nice kit. If you’re doing the labor yourself it’ll be very reasonable. Probably under $4K all in for controller, harness, injectors and port plates.

[clg82]

Originally Posted by Joshinator99

TooHighPSI has a nice kit. If you’re doing the labor yourself it’ll be very reasonable. Probably under $4K all in for controller, harness, injectors and port plates.

The DSX Atlas controller is fancy too....just sayin...haha

[Enslaved]

man... toohighpsi stuff looks top notch. Appear to be very nice cnc'd pieces.

Thank you guys for the suggestions on port injection stuff.

Meth kit suggestions?

[WiggyB]

Originally Posted by Enslaved

man... toohighpsi stuff looks top notch. Appear to be very nice cnc'd pieces.

Thank you guys for the suggestions on port injection stuff.

Meth kit suggestions?

I have the alky meth kit but got it before going port. Runs about $700 for the kit to use the windshield washer bottle.
https://www.alkycontrol.com/shop/cam...rhood-kit-2016


The THPSI kit is an awesome setup been running it for over a year now and love it. Even better is you can get thinner plates that will work better with the LT2 intake and lower it enough to use the cover.