[Ryanbabz71]

Got home from a work trip in Germany and the battery was dead (only sitting a week).

[arpad_m]

Originally Posted by Ryanbabz71

Got home from a work trip in Germany and the battery was dead (only sitting a week).

New aftermarket electronics perhaps?

[david_acm]

Originally Posted by SPLATT

Got the second color on the intake cover today, now I just have to get the clear coat on it so I can get them back on the car.

That looks amazing

[texSSin]

Originally Posted by sactownbwoy

Son got his permit, so we went for a drive.

Now you’ve done it. You are going to have to buy him one or he will borrow yours’. lol

[Rnovrit]

Originally Posted by sactownbwoy

Son got his permit, so we went for a drive.

Nicely done. My daughter has her permit and refuses to drive my ZL1. I guess that is a good thing. We have a matching pair of Fiesta ST’s and she loves hers. Right off the start she wanted a manual car. I think I’m winning at this parenting thing. Lol!!

On another note, I spent this morning doing light wet sanding and polishing to my deck lid as a couple local birds decided to eat what I can only describe as acid mixed with toxic waste and leave me a couple gifts. Car was only outside for a couple hours. Luckily I caught it early enough before it did major harm.

[Ryanbabz71]

Originally Posted by arpad_m

New aftermarket electronics perhaps?

Nope, Stock


Sent from my iPhone using Tapatalk Pro

[SSShark]

This weekend finally got around to installing new GY SC3's and ACS Composite side skirts. Side skirts fit like a glove, super easy to install

[vaeron]

Spent the day washing it, vacuuming it, and cleaning the inside of the windows... so clear I couldn't tell the windows were up...

[SPLATT]

Originally Posted by david_acm

That looks amazing

Thanks. I had to do the intake cover twice as I got a hold of some bad paint that peeled right off between a couple of the layers. It wasn't fun stripping it all off to start over either.

[dpevans]

Originally Posted by Rnovrit

Nicely done. My daughter has her permit and refuses to drive my ZL1. I guess that is a good thing. We have a matching pair of Fiesta ST’s and she loves hers. Right off the start she wanted a manual car. I think I’m winning at this parenting thing. Lol!!

On another note, I spent this morning doing light wet sanding and polishing to my deck lid as a couple local birds decided to eat what I can only describe as acid mixed with toxic waste and leave me a couple gifts. Car was only outside for a couple hours. Luckily I caught it early enough before it did major harm.

You should get her into autocross, Fiesta ST would be a great car to learn in, then maybe she would want to step up to the ZL1.

[dpevans]

Originally Posted by SSShark

This weekend finally got around to installing new GY SC3's and ACS Composite side skirts. Side skirts fit like a glove, super easy to install

One disadvantage to putting on side skirts, if you track the car and end up in a sand trap the skirt will catch and rip the entire rocker panel off. Ask me how I know. I love the look but they are not practical for track. If I ever decide to stop tracking I will probably put a new set on.

[SSShark]

Originally Posted by dpevans

One disadvantage to putting on side skirts, if you track the car and end up in a sand trap the skirt will catch and rip the entire rocker panel off. Ask me how I know. I love the look but they are not practical for track. If I ever decide to stop tracking I will probably put a new set on.

Yep, you're not wrong. Myself, I'm not a track guy so I don't have to worry about that. As for the appearance, they do complete the look. I had a set of EOS side skirts before, and they looked too boxy. The ACS skirts have much nicer lines and don't stick out as much.

[Bumbleboy92]

Originally Posted by dpevans

One disadvantage to putting on side skirts, if you track the car and end up in a sand trap the skirt will catch and rip the entire rocker panel off. Ask me how I know. I love the look but they are not practical for track. If I ever decide to stop tracking I will probably put a new set on.

I’m guessing the same goes for the ZL1, that must suck but at least the side skirts are readily available lol

[SSShark]

After much measuring, cutting, dremeling and re-attaching with some plastic JB Weld, I finally got the stock fuel rail covers to look decent with the LT2 intake manifold.