[Chev133]

Hi,
Has anyone ever had hyper flashing turn signals fixed by reprogramming the BCM? I’ve tried load resistors but nothing works. I’ve been told that you can reprogram the BCM but can’t find anything on you tube ect.
Thanks. Anthony.

[clg82]

What did you do to make it change from normal flashing? That would help to know so we could help diagnose said issue.

[Chev133]

I fitted the C8 auto addicts tail lights.

[Chev133]

How did you find the atlas port injection? I’m about to pull the engine & doing a very similar build.

[clg82]

Originally Posted by Chev133

How did you find the atlas port injection? I’m about to pull the engine & doing a very similar build.

Are you asking me? You don’t need to pull the engine for the DSX Atlas port injection….

[Chev133]

I’m doing oil pump & cam.

[TheDocKlopek]

It may not be related but I had the same issue with both of my newer taillights I installed. I of course didn't read the manual and just hooked everything up, then realized that you hook up the lights differently if its LED or non-LED. Read that manual!

After correcting the wire hookups, both taillights work properly and have ever since.

[clg82]

Originally Posted by Chev133

I’m doing oil pump & cam.

Oh i see lol I was confused, my installer ordered the DSX Atlas and dual widebands straight from DSX. I know they do take some time because a lot of the wiring is done in house and on a per order basis. Either way give DSX a call they'll help you with a timeline.