You are browsing camaro6 
06-17-2025, 04:33 PM
|
#1 |
         Drives: 2SS 1LE Join Date: Aug 2013
Location: US
Posts: 3,786
|
Bellmouth for rotofab sold
Sold
__________________
 Last edited by 6spdhyperblue; 07-20-2025 at 11:53 AM. |
|
|
|
06-17-2025, 09:10 PM
|
#2 |
 
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,153
|
Does this still use an air filter? And does improve performance??
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|
06-17-2025, 09:19 PM
|
#3 | |
|
Moderator
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 6,202
|
Quote:
No air filter, so you’re taking a risk. It’s worth 25 WHP or so on a 1K WHP car You’ll need a separate tune to run it, it drastically changes your MAF readings.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, ATI 8L90, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors & BB HPFP, TooHighPSI/Katech port injection, 15” conversion 1066 WHP STD/1027 SAE, 9.10@152.5 (new times coming)
|
|
|
|
|
|
06-17-2025, 09:48 PM
|
#4 |
|
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,153
|
Do you have deminsions just curious if it could work with my Z28 CAI?
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|
06-18-2025, 02:40 PM
|
#5 |
|
Drives: 2SS 1LE Join Date: Aug 2013
Location: US
Posts: 3,786
|
My caliper is showing a diameter of 152.5mm on the inner part that would slide over the intake tube
__________________
Last edited by 6spdhyperblue; 06-18-2025 at 02:58 PM. |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
