You are browsing camaro6 
05-28-2025, 09:41 AM
|
#1 |
 Drives: 2020 Camaro LT1 Join Date: Apr 2025
Location: Bellefonte Pa
Posts: 4
|
AWE catback to Kooks headers
Anyone know if this is going to work: 2 inch Kooks headers into high flow cats with connecting pipes. Will this bolt up to the AWE cat back track system with resonators or will something need massaged to fit?
__________________
2020 Camaro LT1, MM6, FBO, Texas Speed polished heads. CSP custom grind cam. MSD wires and red lettered intake, E85, Rotofab cold air, Kooks 2 inch long tubes, high flow cats connected to AWE catback track edition with resonators. Eibach 2 inch lowering springs, 1LE short throw shifter, staggered polished rims with Firestone Firehawks.
|
|
|
|
06-01-2025, 09:49 PM
|
#2 |
 Drives: 2018 camaro ss Join Date: Oct 2018
Location: Louisiana
Posts: 10
|
I have 1 7/8 kooks headers going to AWE exhaust with off road pipe. They didn't bolt in or slip in. I had to get a piece of pipe and weld it to the off road pipe so it could slip in the exhaust.
|
|
|
|
|
06-12-2025, 12:16 PM
|
#3 |
 
Drives: 23 2SS 1LE Join Date: Feb 2019
Location: GA
Posts: 624
|
I have AWE 1-7/8 into AWE resonated touring catback. I do think they had to add a little connector piece to line it up but nothing crazy. It basically has to be done with any other catback, some worse than others.
__________________
Instagram: RideWithDanger
Current Mods: Rotofab, Ported LT2 intake, LT5 TB, Kooks Headers, AWE Touring Catback Radiant Red 23' 2SS 1LE 1100: 11/14/22 | BUILT: 3/16/23 2000: 2/17/23 | 4200: 5/8/23 3000: 2/27/23 | 5000/6000: 5/15/23 |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
