What did you do to your 6th Gen Camaro today?! - Page 1171

2SS Capt · 05-24-2025, 11:17 AM

Quote:

Originally Posted by Green82

and i thought i was pushing it with 315/30 on my 20x11 wheels

Nah, 315/30 is fine on an 11.0" wide wheel, I would say 325/30 would be the max I would go on an 11.0" wheel...

sactownbwoy · 05-24-2025, 01:30 PM

Quote:

Originally Posted by 2SS Capt

Nah, 315/30 is fine on an 11.0" wide wheel, I would say 325/30 would be the max I would go on an 11.0" wheel...

325/25 is pushing it. I usually run 325/30 which is a better fit for 11" wheels. I needed new tires and there was a deal on the Sport 6s. They don't even make them in this size anymore it seems. But they are a good balance of traction and wet for me to daily drive.

BSV-CamaroSS · 05-24-2025, 03:14 PM

While installing my BTR 220 cam, I went ahead and installed the GlowTie. My son got me this for Christmas. I wasn't for sure if I would like this or not, but I do like it and think it is a nice little touch to the front end.

sklippi2018 · 05-24-2025, 04:18 PM

Quote:

Originally Posted by BSV-CamaroSS

Looks good!

Appreciate it.

Quote:

Originally Posted by SSShark

Super clean machine

Thanks!

Quote:

Originally Posted by WyreTheWolf

Installed new wheels / tires

Front:
20x9ET25
245/40ZR20

Rear:
20x10ET35
275/35ZR20

Sweet wheels!

Quote:

Originally Posted by sactownbwoy

Went to a car show and won Best American Muscle

Congrats on the win...saweeet ride!

Green82 · 05-24-2025, 05:44 PM

installed a new armrest

NYTMARE23 · 05-24-2025, 06:10 PM

Debating on installing this carbon fiber shark fin cover. Need your guys' input. Install or no? Car is ALL black(exhaust tips and side markers as well)other than wheels(OEM) and carbon fiber hood insert. I feel the fin would complement the hood insert nicely, but the car looks REALLY good just as it is as well. So I'm conflicted.

..UGHHH..SORRY FOR THE SIDEWAYS PICS..AGAIN!!

speedyink1 · 05-24-2025, 07:13 PM

I'd vote for leaving it off, Nytmare. I think keeping that part sleek and with the blacked out theme looks better.

Just my opinion as another Black Camaro owner, but it is hard to make these cars look bad so either way you decide it'll still be beautiful

NYTMARE23 · 05-24-2025, 07:22 PM

Quote:

Originally Posted by speedyink1

I'd vote for leaving it off, Nytmare. I think keeping that part sleek and with the blacked out theme looks better.

Just my opinion as another Black Camaro owner, but it is hard to make these cars look bad so either way you decide it'll still be beautiful

Appreciate it!

. I know....who would have thought something so small would even be a dilemma!

arpad_m · 05-24-2025, 07:36 PM

Quote:

Originally Posted by NYTMARE23

Debating on installing this carbon fiber shark fin cover. Need your guys' input. Install or no? Car is ALL black(exhaust tips and side markers as well)other than wheels(OEM) and carbon fiber hood insert. I feel the fin would complement the hood insert nicely, but the car looks REALLY good just as it is as well. So I'm conflicted.

..UGHHH..SORRY FOR THE SIDEWAYS PICS..AGAIN!!

I would only install it together with a complete carbon fiber exterior trim overhaul (front splitter, side skirts, rear valance, spoiler/wing, mirror covers, possibly door handle and fuel door covers). Subjectively saying, it looks goofy on its own.

NYTMARE23 · 05-24-2025, 07:49 PM

Quote:

Originally Posted by arpad_m

I would only install it together with a complete carbon fiber exterior trim overhaul (front splitter, side skirts, rear valance, spoiler/wing, mirror covers, possibly door handle and fuel door covers). Subjectively saying, it looks goofy on its own.

Yeah, I can see that as well

. Thanks for the input!

beowulf556 · 05-24-2025, 08:22 PM

Finally pulled the trigger on an axle back I’ve been eying for a while, it was 20% off.

p47dman · 05-24-2025, 08:48 PM

I also would stay with original shark fin. I did not like the looks of the one that came with camera kit, too blunt looking.

NYTMARE23 · 05-24-2025, 09:39 PM

Quote:

Originally Posted by p47dman

I also would stay with original shark fin. I did not like the looks of the one that came with camera kit, too blunt looking.

Thanks!

.

tortilla-flats · 05-24-2025, 10:12 PM

F'd up some lug nuts and a wheel. Getting a new set of Gorilla lug nuts.

05-24-2025, 03:14 PM	#16383
BSV-CamaroSS US Army Retired Drives: 2002 WS6, 2023 2SS 1LE Join Date: Dec 2010 Location: Tn Posts: 110 View My Garage	While installing my BTR 220 cam, I went ahead and installed the GlowTie. My son got me this for Christmas. I wasn't for sure if I would like this or not, but I do like it and think it is a nice little touch to the front end. Attached Images __________________ 2002 WS6 #3392 SOM, 820 hp, 644 tq. "Phoenix" 2023 2SS 1LE Shadow Gray Metallic A10, ACS side skirts, rock guards, Diode side markers, Roto-Fab, GM Performance black STB. Stock dyno 384 hp, 397 tq, with RF, BTR 220, Headers mid pipes, Corsa NPP, E85 466hp, 458tq "Night Stalker"

05-24-2025, 05:44 PM	#16385
Green82 Drives: 2022 camaro 2SS Join Date: Apr 2023 Location: Oklahoma Posts: 194	installed a new armrest Attached Images

05-24-2025, 06:10 PM	#16386
NYTMARE23 NYTMARE23 Drives: Black 2023 ZL1 A10 Join Date: Oct 2022 Location: Nebraska Posts: 613	Debating on installing this carbon fiber shark fin cover. Need your guys' input. Install or no? Car is ALL black(exhaust tips and side markers as well)other than wheels(OEM) and carbon fiber hood insert. I feel the fin would complement the hood insert nicely, but the car looks REALLY good just as it is as well. So I'm conflicted...UGHHH..SORRY FOR THE SIDEWAYS PICS..AGAIN!! Attached Images __________________ 2023 A10 ZL1 "NYTMARE" ‐‐--------------------------------------------------------

05-24-2025, 08:22 PM	#16391
beowulf556 Drives: Camaro SS 1LE M6 Join Date: Feb 2024 Location: Las Vegas Posts: 353	Finally pulled the trigger on an axle back I’ve been eying for a while, it was 20% off. Attached Images __________________ 2018 Camaro SS 1LE M6 Stainless Works Headers & X pipe \| Redline Axleback \| E85 \| Rotofab \| Soler Ported TB \| LT2 Manifold

05-24-2025, 07:13 PM	#16387
speedyink1 Drives: 2023 Camaro 1SS 1LE 6MT Join Date: Nov 2023 Location: Vancouver Island Posts: 552	I'd vote for leaving it off, Nytmare. I think keeping that part sleek and with the blacked out theme looks better. Just my opinion as another Black Camaro owner, but it is hard to make these cars look bad so either way you decide it'll still be beautiful

05-24-2025, 08:48 PM	#16392
p47dman Drives: 2024 Camaro 1SS Join Date: Mar 2024 Location: Minnesota Posts: 344	I also would stay with original shark fin. I did not like the looks of the one that came with camera kit, too blunt looking.

05-24-2025, 10:12 PM	#16394
tortilla-flats Drives: 2023 Camaro 2SS Join Date: Nov 2024 Location: DFW, TX Posts: 323 View My Garage	F'd up some lug nuts and a wheel. Getting a new set of Gorilla lug nuts.

User Name		Remember Me?
Password