What did you do to your 6th Gen Camaro today?! - Page 1163

nothing_but_troub1le · 05-01-2025, 07:24 AM

Quote:

Originally Posted by arpad_m

How is visibility after dusk with 5% tint on the windshield? Or do you never drive at night?

The windshield isn't tinted anymore, when it was it was dark as hell for sure but the headlights made it where seeing wasn't much of a problem. Now I just have the brow at the top which I think makes a huge difference with glare and presence of the car. Even with the sides and back being 5% its never a problem unless I'm on a road with no lights.

6/10 for a dark windshield, it looks cool and its not impossible to drive but its not if but when you get stopped, and plus nobody can see you so you cant motion to anyone to go or wave at a fellow Camaro lol

WyreTheWolf · 05-01-2025, 09:31 AM

Quote:

Originally Posted by nothing_but_troub1le

The windshield isn't tinted anymore, when it was it was dark as hell for sure but the headlights made it where seeing wasn't much of a problem. Now I just have the brow at the top which I think makes a huge difference with glare and presence of the car. Even with the sides and back being 5% its never a problem unless I'm on a road with no lights.

6/10 for a dark windshield, it looks cool and its not impossible to drive but its not if but when you get stopped, and plus nobody can see you so you cant motion to anyone to go or wave at a fellow Camaro lol

Live in Arkansas, tint rules depend on which cop you run into. It has been a little over a year since installing the tint. No one has said anything yet.

Agree 100% with the brow.

DamonZ28 · 05-01-2025, 02:31 PM

Replaced my shifter last weekend. I bought the car used, and the shifter had dings & scrapes that looked like it was attacked with a screwdriver. Replaced stock for stock.

arpad_m · 05-01-2025, 02:46 PM

Started trial running ethanol equalizer from Liquid Performance (link here), mostly out of curiosity and also because we have a bit more humidity, but I drive the car less overall.

So far so good, the car feels great using E40-ish, no codes or any side effects.

bigd1276 · 05-01-2025, 07:42 PM

Finally got me some PS4s.

arpad_m · 05-01-2025, 09:14 PM

Quote:

Originally Posted by bigd1276

Finally got me some PS4s.

Good move, these tires are the real deal, especially in Pennsylvania. They work for me all the way down to 35-36 degrees in the winter, and if it's even colder, the lady stays in the garage.

bigd1276 · 05-01-2025, 09:57 PM

Quote:

Originally Posted by arpad_m

Good move, these tires are the real deal, especially in Pennsylvania. They work for me all the way down to 35-36 degrees in the winter, and if it's even colder, the lady stays in the garage.

We were down your way last weekend. Did the yearly Pigeon Forge trip. Loved Skyland Ranch.

arpad_m · 05-01-2025, 10:39 PM

Quote:

Originally Posted by bigd1276

We were down your way last weekend. Did the yearly Pigeon Forge trip. Loved Skyland Ranch.

Sweet

Heh, my daughters did their Dollywood trip the same weekend, and enjoyed it a lot (they both drive now, unbelievable how fast time flies...). Although they spent a good chunk of the time in queues, at least they were with friends, which made it a lot more palatable.

bigd1276 · 05-02-2025, 11:29 AM

Quote:

Originally Posted by arpad_m

Sweet

Heh, my daughters did their Dollywood trip the same weekend, and enjoyed it a lot (they both drive now, unbelievable how fast time flies...). Although they spent a good chunk of the time in queues, at least they were with friends, which made it a lot more palatable.

We were there last Friday. Hot and crowded. Way too much walking for this old guy.

tortilla-flats · 05-02-2025, 01:48 PM

In the middle of installing a Mamo-ported MSD and Soler ported 95mm.

beowulf556 · 05-02-2025, 02:42 PM

Just gave her a detail.

tortilla-flats · 05-02-2025, 05:37 PM

And done.

SSShark · 05-02-2025, 07:37 PM

Quote:

Originally Posted by tortilla-flats

And done.

Very nicely done

Rotate that flex fuel sensor 180 deg to the left, it'll look much better with the black side up.

p47dman · 05-02-2025, 10:08 PM

Installed new Z26 pads on the big brake upgrade. Had a problem. A cliocking noise was heard during the break in. Everything looked tight on road. At home pulled it apart, found that the new spring clips from Power Stop were not bent the same a stock ones. Gave less pressure. Put old ones back in and teat drove fine.

05-01-2025, 02:31 PM	#16271
DamonZ28 Drives: 2020 Camaro 2SS Join Date: Nov 2022 Location: Janesville, WI Posts: 806 View My Garage	Replaced my shifter last weekend. I bought the car used, and the shifter had dings & scrapes that looked like it was attacked with a screwdriver. Replaced stock for stock. Attached Images __________________ 2020 Camaro 2SS - Riverside Blue, NPP, Magnetic Ride, Sunroof Soler DLX Bluetooth Throttle Controller / OFFKAT Smoked LED Side Marker Lights / Blue SS emblems on front & rear / Wildhammer Rear Dark Reflectors / Trim Illusion Gloss Black Door Handle Covers / eBay Black Fuel Door / Screaming Chicken Fender Hash Marks / Color-Matched G2 Caliper Paint CT Sounds Tropo 10" Sub / Down4Sound MM1000 Mini Maxx amp / JL Audio LoC-22 line output converter / Sub Thump Plug N Play T-Harness With ANC Defeat Harness Kit My Camaro Journal

05-01-2025, 02:46 PM	#16272
arpad_m Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017 Location: East Tennessee Posts: 13,150 View My Garage	Started trial running ethanol equalizer from Liquid Performance (link here), mostly out of curiosity and also because we have a bit more humidity, but I drive the car less overall. So far so good, the car feels great using E40-ish, no codes or any side effects. Attached Images __________________ 2018 Camaro 2SS — G7E MX0 NPP F55 IO6 735 rwhp \| 665 rwtq Magnuson TVS 2300 80mm pulley \| Kooks 1 7/8" LT headers \| JRE smooth idle terminator cam \| LT4 FS & injectors \| TSP forged pistons & rods JMS PowerMAX \| DSX flex fuel kit \| Roto-Fab CAI \| Soler 95mm LT5 TB \| 1LE wheels \| 1LE brakes \| BMR rear cradle lockout \| JRE custom tune 1100 - 1/30/18 \| 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 \| 3800 - 2/26/18 4300 - 2/27/18 \| 4B00 - 3/01/18 4200 - 3/05/18 \| 4800 - 3/14/18 5000 - 3/16/18 \| 6000 - 3/19/18

05-01-2025, 07:42 PM	#16273
bigd1276 2017 HyperBlue 2SS Drives: 2017 HyperBlue Camaro 2SS Join Date: Jan 2009 Location: PA Posts: 2,198 View My Garage	Finally got me some PS4s. Attached Images __________________ ] http://www.camaro5.com/forums/showthread.php?t=30755 2010 IBM 2LT RS......Traded for..... 2012 IBM 2SS RS......Traded for..... 2017 HBM 2SS

05-02-2025, 02:42 PM	#16279
beowulf556 Drives: Camaro SS 1LE M6 Join Date: Feb 2024 Location: Las Vegas Posts: 353	Just gave her a detail. __________________ 2018 Camaro SS 1LE M6 Stainless Works Headers & X pipe \| Redline Axleback \| E85 \| Rotofab \| Soler Ported TB \| LT2 Manifold

05-02-2025, 05:37 PM	#16280
tortilla-flats Drives: 2023 Camaro 2SS Join Date: Nov 2024 Location: DFW, TX Posts: 323 View My Garage	And done. Attached Images

05-02-2025, 01:48 PM	#16278
tortilla-flats Drives: 2023 Camaro 2SS Join Date: Nov 2024 Location: DFW, TX Posts: 323 View My Garage	In the middle of installing a Mamo-ported MSD and Soler ported 95mm.

05-02-2025, 10:08 PM	#16282
p47dman Drives: 2024 Camaro 1SS Join Date: Mar 2024 Location: Minnesota Posts: 343	Installed new Z26 pads on the big brake upgrade. Had a problem. A cliocking noise was heard during the break in. Everything looked tight on road. At home pulled it apart, found that the new spring clips from Power Stop were not bent the same a stock ones. Gave less pressure. Put old ones back in and teat drove fine.

User Name		Remember Me?
Password