You are browsing camaro6 
04-05-2025, 01:51 AM
|
#1 |
 Drives: 2016 Camaro SS Join Date: Apr 2025
Location: Tucson, AZ
Posts: 7
|
Magnuson Heartbeat P2230
I have a 2016 Camaro SS that I recently purchased that came installed with a Magnuson Heartbeat Supercharger. It ran great until I got the opportunity to bask in the warm amber glow of the check engine light. It is a code P2230 Barometric Pressure Sensor 'A' Circuit Intermittent/Erratic. Tried clearing it and it comes right back immediately. Does anyone know where that sensor is located so I can change it out? Is it the one on the back of the blower (ACdelco PN 12592525)?
Thanks in advance PS sorry for the excruciatingly large picture |
|
|
|
04-05-2025, 04:39 AM
|
#2 |
|
Drives: 2016 Camaro SS Join Date: Apr 2025
Location: Tucson, AZ
Posts: 7
|
UPDATE: Rescanned the car tonight. It now has a P00C7 and a P2228 active. The P2230 is still active as well.
Last edited by veaceonee; 04-05-2025 at 04:50 AM. |
|
|
|
|
04-07-2025, 09:44 AM
|
#3 |
  
Drives: 2018 HBM ZLE Join Date: Aug 2017
Location: In the garage
Posts: 888
|
Back of the motor, driver side head.
__________________
Check out my youtube channel
https://www.youtube.com/@evans.educa...ocxUzC1ferqeg8 Full SPL suspension / Ported blower / NW 103mm / Rotofab BG / 2" Headers / Ported heads / Upgraded Valvetrain w/ DOD delete / Custom 38% Cam / C7.R Timing chain / Katech Oil pump / BMR motor mounts and chassis braces / Katech 174* Thermostat / Pierburg Supercharger coolant pump / PLM HX / JMS voltage booster / ATI Damper w/ 8.6 Lower / MM Mild catch can / ADM Resevoir / soon to come... Rebuilt Engine / XDI +30% injectors / PWR Oil cooler setup / GMS Hood bracket 760 Whp / 700 Wtq E50 |
|
|
|
|
04-12-2025, 12:55 AM
|
#4 |
|
Drives: 2016 Camaro SS Join Date: Apr 2025
Location: Tucson, AZ
Posts: 7
|
Replaced MAP sensor with a GM unit. CEL was gone for about 30 minutes, then came back. Same P2230 code.
|
|
|
|
|
04-21-2025, 10:21 AM
|
#5 |
|
Drives: 2018 HBM ZLE Join Date: Aug 2017
Location: In the garage
Posts: 888
|
Did you change the sensor i circled? That is the barometric sensor which is associated with p2230. If you changed the MAP sensor then that would be a different code. Their are actually two MAP sensors, one on the front of blower pre rotor pack, and one on the back post rotor pack entering the motor.
Just want to be clear as you stated you replaced the MAP sensor which is different than Baro Sensor.
__________________
Check out my youtube channel
https://www.youtube.com/@evans.educa...ocxUzC1ferqeg8 Full SPL suspension / Ported blower / NW 103mm / Rotofab BG / 2" Headers / Ported heads / Upgraded Valvetrain w/ DOD delete / Custom 38% Cam / C7.R Timing chain / Katech Oil pump / BMR motor mounts and chassis braces / Katech 174* Thermostat / Pierburg Supercharger coolant pump / PLM HX / JMS voltage booster / ATI Damper w/ 8.6 Lower / MM Mild catch can / ADM Resevoir / soon to come... Rebuilt Engine / XDI +30% injectors / PWR Oil cooler setup / GMS Hood bracket 760 Whp / 700 Wtq E50 |
|
|
|
|
04-21-2025, 10:23 AM
|
#6 |
|
Drives: 2018 HBM ZLE Join Date: Aug 2017
Location: In the garage
Posts: 888
|
Also check the wiring to each and make sure nothings burnt or broken. Forgot you had multiple codes
__________________
Check out my youtube channel
https://www.youtube.com/@evans.educa...ocxUzC1ferqeg8 Full SPL suspension / Ported blower / NW 103mm / Rotofab BG / 2" Headers / Ported heads / Upgraded Valvetrain w/ DOD delete / Custom 38% Cam / C7.R Timing chain / Katech Oil pump / BMR motor mounts and chassis braces / Katech 174* Thermostat / Pierburg Supercharger coolant pump / PLM HX / JMS voltage booster / ATI Damper w/ 8.6 Lower / MM Mild catch can / ADM Resevoir / soon to come... Rebuilt Engine / XDI +30% injectors / PWR Oil cooler setup / GMS Hood bracket 760 Whp / 700 Wtq E50 |
|
|
|
|
04-21-2025, 11:16 AM
|
#7 |
 
Drives: 2019 ZL1 "1LE" | 16 SS | 2017 F30 Join Date: Dec 2021
Location: Europe
Posts: 132
|
Uhm these are barometric codes.
100% this is the Mass air flow sensor, it meassures barometric pressure and air flow. Check its connection, otherwise replace it.
__________________
Callaway SC750 ZL1, DIY 1LE with added OEM 1LE Wheels, DSSV Suspension and 1LE Aero, FEA front control arms, DIY oil cooler, CWA 150 pump, bigger intercooler, Phenolic blower spacer, 82°C thermostat, BMR lockout kit, CTSV Brake Air Deflectors, Smooth idle cam, LS7 lifters, Bronze trunnion bushings. Tuned by JRE
|
|
|
|
|
05-12-2025, 09:36 AM
|
#8 |
|
Drives: 2016 Camaro SS Join Date: Apr 2025
Location: Tucson, AZ
Posts: 7
|
It appears I may have it solved. Got one of those MAP Sensor break out harnesses and installed it before the Magnuson MAF harness. Cleared codes. Engine runs better, and no CEL so far (its been 3 days). Thank you for all the help.
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
