For those that need to pull the engine

Evansa22 · 02-18-2025, 11:53 AM

Hey Guys,
Posted this in the DIY section but it's more applicable to the ZL1 so figured I'd put it up here also. Made a video on how to pull the motor out the top for those that need to get it out for one reason or another and like to do your own work. Hope this helps!

SWFLZL1 · 02-18-2025, 12:42 PM

Nice detailed video.

Evansa22 · 02-18-2025, 03:43 PM

Thank you, try to do my best with them. Like adding the service manual pages in case I don't get the best shot and it let's you know how it's supposed to be done according to GM.

*Joshinator99* · 02-18-2025, 03:52 PM

Quote:

Originally Posted by Evansa22

Thank you, try to do my best with them. Like adding the service manual pages in case I don't get the best shot and it let's you know how it's supposed to be done according to GM.

Very nice, I will check it out.

Future1LE · 02-19-2025, 08:35 AM

Hey, since your engine is out. Can you help me with a picture or video. My belt from my super charger broke and cut a few wires. I believe its the Camshaft position sensor harness. Can you grab me a picture or video of how that harness look and is routed? I am referring to the wire harness on the front cover...incase I got the name from lol..

Also if anyone know the part number for that harness and can share, that would be awesome!

Thank you

SOCAL.M6.ZLE · 02-19-2025, 08:59 AM

Great job Aaron, this is going to help alot of people for sure! great work!!

beowulf556 · 02-19-2025, 10:38 AM

Some serious talent pulling an engine out by yourself! Well done!

RobZL1 · 02-19-2025, 10:58 AM

Awesome video, and very timely for me!

Many thanks!!

Ringmaster72 · 02-19-2025, 11:17 AM

FUTURE1LE in regards to the harness......

I went through this last year. I had a belt issue destroy my harness and had a hard time finding the part. I used this part number: 12734111. If I remember there was slight difference but it worked without any wire changes. I think the "bracket" was slightly different. Here is the exact one I used. I also have the TSP DOD delete timing cover, so it is slightly different than stock and does need that plug.
https://www.ebay.com/itm/296886665875

Future1LE · 02-19-2025, 11:53 AM

Quote:

Originally Posted by Ringmaster72

FUTURE1LE in regards to the harness......

I went through this last year. I had a belt issue destroy my harness and had a hard time finding the part. I used this part number: 12734111. If I remember there was slight difference but it worked without any wire changes. I think the "bracket" was slightly different. Here is the exact one I used. I also have the TSP DOD delete timing cover, so it is slightly different than stock and does need that plug.
https://www.ebay.com/itm/296886665875

Thanks for that information! My timing cover still stock. I actually did found that part number as well when I was searching this morning and saw that it was replaced by Part number 12712016. Just based off part picture, I think it should be the right part. Was it hard to replaced? How long do you guess it took you?

Ringmaster72 · 02-19-2025, 11:55 AM

Quote:

Originally Posted by Future1LE

Thanks for that information! My timing cover still stock. I actually did found that part number as well when I was searching this morning and saw that it was replaced by Part number 12712016. Just based off part picture, I think it should be the right part. Was it hard to replaced? How long do you guess it took you?

It wasnt bad, it unplugs on the drivers side by the oil pan. Worst part was the goddamn stretch ac belt

Evansa22 · 02-19-2025, 01:37 PM

I can snap you a picture when I get home if you still need it future1le. Ringmaster called it, on the front of the motor at the bottom. Has a little shield covering it so may be easy to miss.

Evansa22 · 02-19-2025, 01:38 PM

Appreciate the feedback guys

Evansa22 · 02-19-2025, 01:43 PM

Maybe this helps in the meantime time

02-18-2025, 03:43 PM	#3
Evansa22 Drives: 2018 HBM ZLE Join Date: Aug 2017 Location: In the garage Posts: 888	Thank you, try to do my best with them. Like adding the service manual pages in case I don't get the best shot and it let's you know how it's supposed to be done according to GM. __________________ Check out my youtube channel https://www.youtube.com/@evans.educa...ocxUzC1ferqeg8 Full SPL suspension / Ported blower / NW 103mm / Rotofab BG / 2" Headers / Ported heads / Upgraded Valvetrain w/ DOD delete / Custom 38% Cam / C7.R Timing chain / Katech Oil pump / BMR motor mounts and chassis braces / Katech 174* Thermostat / Pierburg Supercharger coolant pump / PLM HX / JMS voltage booster / ATI Damper w/ 8.6 Lower / MM Mild catch can / ADM Resevoir / soon to come... Rebuilt Engine / XDI +30% injectors / PWR Oil cooler setup / GMS Hood bracket 760 Whp / 700 Wtq E50

02-19-2025, 08:35 AM	#5
Future1LE Drives: 2020 Chevy Camaro ZL1 1LE Join Date: Nov 2017 Location: Earth Posts: 137	Hey, since your engine is out. Can you help me with a picture or video. My belt from my super charger broke and cut a few wires. I believe its the Camshaft position sensor harness. Can you grab me a picture or video of how that harness look and is routed? I am referring to the wire harness on the front cover...incase I got the name from lol.. Also if anyone know the part number for that harness and can share, that would be awesome! Thank you Last edited by Future1LE; 02-19-2025 at 10:22 AM.

02-19-2025, 08:59 AM	#6
SOCAL.M6.ZLE Having FUN in the SUN... Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022 Location: San Diego CA Posts: 2,189	Great job Aaron, this is going to help alot of people for sure! great work!! __________________ 2022 M6 ZLE: GMS Stage.III KONG X.PORT Package + DMS Lid + GMS Rear Bumper Belly Pan + GMS Hood Bracket + GMS Flex Fuel Package + MONSTER Triple S Clutch + XDI.50% Injectors + CLICK FOR BUILD LIST or www.GRIFFIN-MOTORSPORTS.com = 915rwhp 850rwtq + E60 + 15psi

02-19-2025, 10:38 AM	#7
beowulf556 Drives: Camaro SS 1LE M6 Join Date: Feb 2024 Location: Las Vegas Posts: 463	Some serious talent pulling an engine out by yourself! Well done! __________________ 2018 Camaro SS 1LE M6 Stainless Works Headers & X pipe \| Redline Axleback \| E85 \| Rotofab \| Soler Ported TB \| LT2 Manifold

02-19-2025, 10:58 AM	#8
RobZL1 fo'shizZL1 Drives: 2017 ZL1 Join Date: Aug 2017 Location: ATL Posts: 1,848	Awesome video, and very timely for me! Many thanks!! __________________ 2017 ZL1 M6 Black \| Maggie 2650 // 103TB // Big Gulp // CSP LT's & Ultra Cats // BMR MM // BC Forged KL13 Mods being installed- oil pump, cam, ported heads, dual in-tank, Goliath and XDI, corn, etc., etc.

02-18-2025, 12:42 PM	#2
SWFLZL1 Drives: 2022 ZL1 Join Date: Sep 2024 Location: SWFL Posts: 131	Nice detailed video.

02-19-2025, 11:17 AM	#9
Ringmaster72 Drives: Chevrolet Camaro Join Date: Jul 2022 Location: Harrington, DE Posts: 28	FUTURE1LE in regards to the harness...... I went through this last year. I had a belt issue destroy my harness and had a hard time finding the part. I used this part number: 12734111. If I remember there was slight difference but it worked without any wire changes. I think the "bracket" was slightly different. Here is the exact one I used. I also have the TSP DOD delete timing cover, so it is slightly different than stock and does need that plug. https://www.ebay.com/itm/296886665875

02-19-2025, 01:37 PM	#12
Evansa22 Drives: 2018 HBM ZLE Join Date: Aug 2017 Location: In the garage Posts: 888	I can snap you a picture when I get home if you still need it future1le. Ringmaster called it, on the front of the motor at the bottom. Has a little shield covering it so may be easy to miss. __________________ Check out my youtube channel https://www.youtube.com/@evans.educa...ocxUzC1ferqeg8 Full SPL suspension / Ported blower / NW 103mm / Rotofab BG / 2" Headers / Ported heads / Upgraded Valvetrain w/ DOD delete / Custom 38% Cam / C7.R Timing chain / Katech Oil pump / BMR motor mounts and chassis braces / Katech 174* Thermostat / Pierburg Supercharger coolant pump / PLM HX / JMS voltage booster / ATI Damper w/ 8.6 Lower / MM Mild catch can / ADM Resevoir / soon to come... Rebuilt Engine / XDI +30% injectors / PWR Oil cooler setup / GMS Hood bracket 760 Whp / 700 Wtq E50

02-19-2025, 01:38 PM	#13
Evansa22 Drives: 2018 HBM ZLE Join Date: Aug 2017 Location: In the garage Posts: 888	Appreciate the feedback guys __________________ Check out my youtube channel https://www.youtube.com/@evans.educa...ocxUzC1ferqeg8 Full SPL suspension / Ported blower / NW 103mm / Rotofab BG / 2" Headers / Ported heads / Upgraded Valvetrain w/ DOD delete / Custom 38% Cam / C7.R Timing chain / Katech Oil pump / BMR motor mounts and chassis braces / Katech 174* Thermostat / Pierburg Supercharger coolant pump / PLM HX / JMS voltage booster / ATI Damper w/ 8.6 Lower / MM Mild catch can / ADM Resevoir / soon to come... Rebuilt Engine / XDI +30% injectors / PWR Oil cooler setup / GMS Hood bracket 760 Whp / 700 Wtq E50

02-19-2025, 01:43 PM	#14
Evansa22 Drives: 2018 HBM ZLE Join Date: Aug 2017 Location: In the garage Posts: 888	Maybe this helps in the meantime time Attached Images __________________ Check out my youtube channel https://www.youtube.com/@evans.educa...ocxUzC1ferqeg8 Full SPL suspension / Ported blower / NW 103mm / Rotofab BG / 2" Headers / Ported heads / Upgraded Valvetrain w/ DOD delete / Custom 38% Cam / C7.R Timing chain / Katech Oil pump / BMR motor mounts and chassis braces / Katech 174* Thermostat / Pierburg Supercharger coolant pump / PLM HX / JMS voltage booster / ATI Damper w/ 8.6 Lower / MM Mild catch can / ADM Resevoir / soon to come... Rebuilt Engine / XDI +30% injectors / PWR Oil cooler setup / GMS Hood bracket 760 Whp / 700 Wtq E50

User Name		Remember Me?
Password