ZL1 High Flow Hood Vent Bracket - NEW PRODUCT - Page 4

clg82 · 01-14-2025, 07:32 AM

I'd be in for one as well.

LancevanceZLE · 01-15-2025, 02:17 AM

I'll take one

Curr · 01-15-2025, 12:00 PM

I am *very* interested!

df3077 · 01-16-2025, 09:34 AM

I want one

MikeEM1 · 01-16-2025, 10:21 AM

I made mine for $9 with aluminum from Lowe's. Spray painted them satin black. Car is tracked at COTA and I have no issues.

https://www.lowes.com/pd/Hillman-3-f...-Solid/3055447

I will note, if you're running a Roto-Fab, it will not be sealed to the hood anymore. Smarter to run a closed box intake.

SOCAL.M6.ZLE · 01-16-2025, 01:16 PM

Quote:

Originally Posted by MikeEM1

I made mine for $9 with aluminum from Lowe's. Spray painted them satin black. Car is tracked at COTA and I have no issues.

https://www.lowes.com/pd/Hillman-3-f...-Solid/3055447

I will note, if you're running a Roto-Fab, it will not be sealed to the hood anymore. Smarter to run a closed box intake.

Nice work Mike, love the creativity!!!

1wraith76 · 01-16-2025, 05:16 PM

Quote:

Originally Posted by MikeEM1

I made mine for $9 with aluminum from Lowe's. Spray painted them satin black. Car is tracked at COTA and I have no issues.

https://www.lowes.com/pd/Hillman-3-f...-Solid/3055447

I will note, if you're running a Roto-Fab, it will not be sealed to the hood anymore. Smarter to run a closed box intake.

Very nice. If the brackets are ready by spring I will buy them. If not, I wil copy you as I want this for the summer track season.

SOCAL.M6.ZLE · 01-17-2025, 11:47 AM

Hey Team, my first test batch is complete. I only ran (10) units at a thicker .090" thick aluminum (all my road testing was using a thinner .063" unit). I also ran a small test with .125" thick aluminum. Although I think .125" is kind of overkill, that will be the thickness moving forward. With that said, I have (10) units boxed up and ready to ship (powder coated black). I will sell these (10) .090" units for $75. The future .125" units will be $85. I hope you enjoy this little upgrade as much as I have.

Note: The .125" thick units should be ready to ship in 2 weeks or less.

https://www.griffin-motorsports.com/...insert-bracket

dfxrte · 01-17-2025, 01:28 PM

Quote:

Originally Posted by MikeEM1

I made mine for $9 with aluminum from Lowe's. Spray painted them satin black. Car is tracked at COTA and I have no issues.

https://www.lowes.com/pd/Hillman-3-f...-Solid/3055447

I will note, if you're running a Roto-Fab, it will not be sealed to the hood anymore. Smarter to run a closed box intake.

what's the downside to it not being fully sealed with the brackets?

AZIROC · 01-17-2025, 01:32 PM

I posted on the FB post but I'll post here.

Will the part that is removed be able to be reinstalled (easily). Is it just bolt in or is there some type of adhesive/tape as well? while I really like the idea for tracks days, I'm also concerned about if I wash the car and water gets all over the engine bay.

SOCAL.M6.ZLE · 01-17-2025, 02:21 PM

Quote:

Originally Posted by AZIROC

I posted on the FB post but I'll post here.

Will the part that is removed be able to be reinstalled (easily). Is it just bolt in or is there some type of adhesive/tape as well? while I really like the idea for tracks days, I'm also concerned about if I wash the car and water gets all over the engine bay.

Yes sir, I have had mine on and off several time. The OEM hardware holds it back in place nicely. I would point out that the OWM seal is not an adhesive, rather a foam seal, that gets stuck on over time. The seal is easy to pop loose with a plastic putty knife.

AZIROC · 01-17-2025, 02:23 PM

Oh awesome. Thanks for the reply. I'll check that out and see about ordering one.

SOCAL.M6.ZLE · 01-17-2025, 05:15 PM

Thanks for the orders guys. First batch is sold out, ill let you know when the next batch arrived

dfxrte · 01-18-2025, 08:36 AM

Quote:

Originally Posted by SOCAL.M6.ZLE

Thanks for the orders guys. First batch is sold out, ill let you know when the next batch arrived

thank YOU sir

01-15-2025, 12:00 PM	#45
Curr Probably doesn't like you Drives: 2022 WCT ZL1 M6 Join Date: Jun 2015 Location: Boston-ish Posts: 1,384	I am very interested! __________________ I hope the 6th gen Camaro has a melodious horn trumpet. I'll tootel it at the ladies, yelling out "Hi hi." - RenegadeXR كافر ΜΟΛΩΝ ΛΑΒΕ железобетонное очко Quod gratis asseritur, gratis negatur. There is an unequal amount of good and bad in most things, the trick is to work out the ratio and act accordingly.

01-16-2025, 09:34 AM	#46
df3077 Drives: 2021 Chev Camaro ZL1 1le Join Date: Jan 2025 Location: Texas Posts: 1	Great idea, I want one as well I want one

01-16-2025, 10:21 AM	#47
MikeEM1 Drives: Tracks: 18' ZL1 1LE Join Date: Mar 2018 Location: Irvine, CA --> ATX Posts: 146	I made mine for $9 with aluminum from Lowe's. Spray painted them satin black. Car is tracked at COTA and I have no issues. https://www.lowes.com/pd/Hillman-3-f...-Solid/3055447 I will note, if you're running a Roto-Fab, it will not be sealed to the hood anymore. Smarter to run a closed box intake. Attached Images __________________ 18' ZL1 1LE Red Hot track toy Endless RF650 Ported TB/Rotofab dry intake AWE Track w/PLP APR GTC300 wing / Singular Endplates ASC Splitter / PA tunnels MFR Engineering Custom Diffuser Race Louvers Fender Vents Trackspec roll bar Various SPL suspension Hawk DTC 70/60 pads APEX SM10 & ARC8 For sale: 2018 OEM ZL1 1LE Wing 12' Nissan GT-R SOLD

01-17-2025, 11:47 AM	#50
SOCAL.M6.ZLE Having FUN in the SUN... Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022 Location: San Diego CA Posts: 2,117	Hey Team, my first test batch is complete. I only ran (10) units at a thicker .090" thick aluminum (all my road testing was using a thinner .063" unit). I also ran a small test with .125" thick aluminum. Although I think .125" is kind of overkill, that will be the thickness moving forward. With that said, I have (10) units boxed up and ready to ship (powder coated black). I will sell these (10) .090" units for $75. The future .125" units will be $85. I hope you enjoy this little upgrade as much as I have. Note: The .125" thick units should be ready to ship in 2 weeks or less. https://www.griffin-motorsports.com/...insert-bracket Attached Images __________________ 2022 M6 ZLE: GMS Stage.III KONG X.PORT Package + DMS Lid + GMS Rear Bumper Belly Pan + GMS Hood Bracket + GMS Flex Fuel Package + MONSTER Triple S Clutch + XDI.50% Injectors + CLICK FOR BUILD LIST or www.GRIFFIN-MOTORSPORTS.com = 915rwhp 850rwtq + E60 + 15psi

01-17-2025, 05:15 PM	#55
SOCAL.M6.ZLE Having FUN in the SUN... Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022 Location: San Diego CA Posts: 2,117	Thanks for the orders guys. First batch is sold out, ill let you know when the next batch arrived __________________ 2022 M6 ZLE: GMS Stage.III KONG X.PORT Package + DMS Lid + GMS Rear Bumper Belly Pan + GMS Hood Bracket + GMS Flex Fuel Package + MONSTER Triple S Clutch + XDI.50% Injectors + CLICK FOR BUILD LIST or www.GRIFFIN-MOTORSPORTS.com = 915rwhp 850rwtq + E60 + 15psi

01-14-2025, 07:32 AM	#43
clg82 Banned Drives: 2020 Camaro ZL1 Join Date: Oct 2020 Location: Texas Posts: 1,724	I'd be in for one as well.

01-15-2025, 02:17 AM	#44
LancevanceZLE Drives: 2019 ZL1 1LE Join Date: Jul 2022 Location: CA Posts: 94	I'll take one

01-17-2025, 01:32 PM	#52
AZIROC Drives: '86 IROC-Z '18 ZL1 Join Date: Jul 2019 Location: Arizona Posts: 901	I posted on the FB post but I'll post here. Will the part that is removed be able to be reinstalled (easily). Is it just bolt in or is there some type of adhesive/tape as well? while I really like the idea for tracks days, I'm also concerned about if I wash the car and water gets all over the engine bay.

01-17-2025, 02:23 PM	#54
AZIROC Drives: '86 IROC-Z '18 ZL1 Join Date: Jul 2019 Location: Arizona Posts: 901	Oh awesome. Thanks for the reply. I'll check that out and see about ordering one.

User Name		Remember Me?
Password