You are browsing camaro6 
12-31-2024, 03:35 PM
|
#1 |
 Drives: 2022 Vivid Orange LT1-M6 Join Date: Dec 2015
Location: Houston TX
Posts: 433
|
MSD Intake with fuel rails?
I’m looking at a used intake in eBay and it has fuel rails. Would I have to use this and would there be any benefit to a bolt on car?
Also does the gasket between the top and bottom half of the intake look normal? I think I remember it being black or red. https://www.ebay.com/itm/13547153637...mis&media=COPY
__________________
2022 Vivid Orange M6 LT1 - 2" ARH headers with cats (full system), 3" ARH Pure Thunder mufflers, ported MSD intake, Soler 95mm tb, Rotofab CAI, E85 flex fuel, tuned by Jason@snackbartuning
Old car 2016 M6 SS - MSD intake, Rotofab, 2" ARH headers with cats, E85 with EFI Tuning. Best ET: 11.7@122mph |
|
|
|
01-01-2025, 10:14 AM
|
#2 |
           
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 7,559
|
That was likely on a forced induction setup that either had port injection or meth. No you don't need it for a bolt-on car. It needs a new gasket.
__________________
 2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel |
|
|
|
|
01-02-2025, 09:41 PM
|
#3 | |
|
Drives: 2022 Vivid Orange LT1-M6 Join Date: Dec 2015
Location: Houston TX
Posts: 433
|
Quote:
__________________
2022 Vivid Orange M6 LT1 - 2" ARH headers with cats (full system), 3" ARH Pure Thunder mufflers, ported MSD intake, Soler 95mm tb, Rotofab CAI, E85 flex fuel, tuned by Jason@snackbartuning
Old car 2016 M6 SS - MSD intake, Rotofab, 2" ARH headers with cats, E85 with EFI Tuning. Best ET: 11.7@122mph |
|
|
|
|
|
01-03-2025, 08:26 AM
|
#4 | |
 
Drives: 2018 Camaro SS A8 "Dark Knight" Join Date: Oct 2019
Location: MICHIGAN
Posts: 258
|
Quote:
__________________
DARK KNIGHT
2018 SS A8 11.37 @ 121.01 GPI Tuned E85 Nitto tires Roto Fab CAI MSD intake |
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
