|
|
#1 |
![]() ![]() ![]() ![]() ![]() Drives: '23 1SS Sharkskin A10 Join Date: Sep 2018
Location: South Florida
Posts: 1,539
|
AFM Actuators Delete
Hello folks. Has anyone tuned out their AFM actuators using HP Tuners? I've been driving around with them zip tied but now want to eliminate them all together. I followed this post https://www.corvetteforum.com/forums...hp-tuners.html in a Corvette forum and I think I've followed the instructions correctly.
Below is my CCM table and I have checked all the necessary codes to "No Error Reported" as stated by user Fyreant. Do I also have to set the "AFM Valve Enabled" parameter to "Disabled"? Any help would be much appreciated.
__________________
Kooks 1-7/8" Long Tube Headers l Kooks Hi-Flow Cats l Kooks X-Pipe l Borla S-Type NPP Exhaust
GPI SS2 Cam l GPI Ported Heads l Katech Oil Pump l Katech Valley Cover l GPI Hardened Pushrods BTR Valve Springs l Johnson 2110R Lifters l Ported LT2 Intake Manifold l Ported 95mm LT5 TB Rotofab CAI l Mishimoto Catch Can l DSX Flex Fuel Sensor l 93/E85 Tune BMR Rear Cradle Lockout Kit l Katech VVT Delete kit l CHE Trunion Upgrade l LT1 HPFP LME/GPI Timing Chain Guide l Katech Timing Chain l AFM Delete Halo Tunnel Brace l MRR 1LE Wheels l Goodyear SC3 1LE Tire Package l GM Lowering Kit |
|
|
|
|
|
#2 |
|
Snackbar Tuning
Drives: 2023 SGM ZL1 Join Date: Oct 2016
Location: Florida
Posts: 1,522
|
Should be able to set the codes to no error reported and uncheck the box. The set the tab in the CCM for "AFM Valve" to disabled. It's been a while since I did it but I don't recall anything special.
__________________
GM Gen V Calibrator
|
|
|
|
|
|
#3 | |
![]() ![]() ![]() ![]() ![]() Drives: '23 1SS Sharkskin A10 Join Date: Sep 2018
Location: South Florida
Posts: 1,539
|
Quote:
Although it was an expensive endeavor @ 3 credits.
__________________
Kooks 1-7/8" Long Tube Headers l Kooks Hi-Flow Cats l Kooks X-Pipe l Borla S-Type NPP Exhaust
GPI SS2 Cam l GPI Ported Heads l Katech Oil Pump l Katech Valley Cover l GPI Hardened Pushrods BTR Valve Springs l Johnson 2110R Lifters l Ported LT2 Intake Manifold l Ported 95mm LT5 TB Rotofab CAI l Mishimoto Catch Can l DSX Flex Fuel Sensor l 93/E85 Tune BMR Rear Cradle Lockout Kit l Katech VVT Delete kit l CHE Trunion Upgrade l LT1 HPFP LME/GPI Timing Chain Guide l Katech Timing Chain l AFM Delete Halo Tunnel Brace l MRR 1LE Wheels l Goodyear SC3 1LE Tire Package l GM Lowering Kit |
|
|
|
|
|
|
#4 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 7,665
|
you should set the AFM valve to disabled.
__________________
2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel |
|
|
|
|
|
#5 |
![]() ![]() ![]() ![]() ![]() Drives: '23 1SS Sharkskin A10 Join Date: Sep 2018
Location: South Florida
Posts: 1,539
|
I was thinking the same thing. The only reason why it didn't is because there was no mention of it on the tutorial from the Corvette forum. Better to disable it just to be sure.
__________________
Kooks 1-7/8" Long Tube Headers l Kooks Hi-Flow Cats l Kooks X-Pipe l Borla S-Type NPP Exhaust
GPI SS2 Cam l GPI Ported Heads l Katech Oil Pump l Katech Valley Cover l GPI Hardened Pushrods BTR Valve Springs l Johnson 2110R Lifters l Ported LT2 Intake Manifold l Ported 95mm LT5 TB Rotofab CAI l Mishimoto Catch Can l DSX Flex Fuel Sensor l 93/E85 Tune BMR Rear Cradle Lockout Kit l Katech VVT Delete kit l CHE Trunion Upgrade l LT1 HPFP LME/GPI Timing Chain Guide l Katech Timing Chain l AFM Delete Halo Tunnel Brace l MRR 1LE Wheels l Goodyear SC3 1LE Tire Package l GM Lowering Kit |
|
|
|
|
|
#6 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 7,665
|
Probably because if AFM/DOD is disabled in the ECM it will never try to communicate with the CCM to actuate the valves. But it's always best to be thorough.
__________________
2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel |
|
|
|
|
|
#7 | |
![]() ![]() ![]() ![]() ![]() Drives: '23 1SS Sharkskin A10 Join Date: Sep 2018
Location: South Florida
Posts: 1,539
|
Quote:
__________________
Kooks 1-7/8" Long Tube Headers l Kooks Hi-Flow Cats l Kooks X-Pipe l Borla S-Type NPP Exhaust
GPI SS2 Cam l GPI Ported Heads l Katech Oil Pump l Katech Valley Cover l GPI Hardened Pushrods BTR Valve Springs l Johnson 2110R Lifters l Ported LT2 Intake Manifold l Ported 95mm LT5 TB Rotofab CAI l Mishimoto Catch Can l DSX Flex Fuel Sensor l 93/E85 Tune BMR Rear Cradle Lockout Kit l Katech VVT Delete kit l CHE Trunion Upgrade l LT1 HPFP LME/GPI Timing Chain Guide l Katech Timing Chain l AFM Delete Halo Tunnel Brace l MRR 1LE Wheels l Goodyear SC3 1LE Tire Package l GM Lowering Kit |
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|