|
|
#1 |
![]() Drives: Chevrolet Camaro 2SS Join Date: Jul 2019
Location: FL
Posts: 139
|
2019 2SS Constant 12v dash cam/ overhead schematic
Well I attempted to find a 12v constant based off of a thread on here for 12v constant power being available in the overhead ABS connector location but I popped it open and had different colors so I downloaded the acdelco tech documents today and will investigate this weekend about trying to wire up a 12v constant power source.
If anyone knows if this is a dead end chime in before I give it another go. Really not wanting to run 12v from trunk or engine bay if I dont have to so any help is greatly appreciated. |
|
|
|
|
|
#2 |
![]() Drives: 2019 1SS 1LE Join Date: Sep 2019
Location: Frisco, TX
Posts: 4
|
Ironically enough, GM decided to drop the Homelink option on the 2019+ Camaros -- which is where you can tap the harness (Red) for 12V constant for the earlier model years. If your 2SS has that rear view mirror camera, it should have a constant power source, but whether or not it's 12V, someone will have to chime in.
|
|
|
|
|
|
#3 | |
![]() Drives: Chevrolet Camaro 2SS Join Date: Jul 2019
Location: FL
Posts: 139
|
Quote:
|
|
|
|
|
|
|
#4 | |
![]() Drives: 2019 1SS 1LE Join Date: Sep 2019
Location: Frisco, TX
Posts: 4
|
Quote:
https://www.camaro6.com/forums/showp...1&postcount=18 You may want to drop a PM to them to see if they can confirm if it's constant or switched, otherwise grab a multimeter and do some probing on that mirror's harness. |
|
|
|
|
|
|
#5 |
![]() Drives: Chevy Corvette Z06, Camaro 2SS 1LE Join Date: Oct 2024
Location: Canada
Posts: 5
|
Just want to update this thread for future reference. The mirror purple/white wire is a 12V ignition wire. (Switched 12V, not retained accessory power)
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|