You are browsing camaro6 
|
||
|
Post Reply
|
|
|
Thread Tools |
11-24-2024, 09:14 AM
|
#1 |
 Drives: Chevrolet Camaro Join Date: Mar 2021
Location: Kentucky
Posts: 32
|
Brand new pads and rotor’s, still just one corner squealing. Helpppppoo
19 SS, about 50k on it. Noticed a few weeks ago I was starting to get just a bit of brake squeal from maybe 10mph to a stop. Only at a certain amount of brake travel, I can maneuver the pedal in such a way that I only get it for maybe the last 3-4mph if needed. I was eventually able to figure out that its only coming from the passenger rear, absolutely no sound from the other 3 corners. It was about time for brakes anyway so I went ahead and swapped them all. The sound got 90% better for about a week maybe 10 days then came right back. Took them apart again and noticed a tiny lip on the rear rotors. Said screw it, put on 2 brand new OE rear rotors and warrantied out the pads so put brand new pads on as well. Absolutely no change. Please any suggestions anyone?? Still just the one corner, passenger rear
__________________
2019 Shock 2SS
BTR220 Cam, LT’s, Borla Atak, LT2 Intake, E85 Tune by RPP |
|
|
|
11-24-2024, 02:26 PM
|
#2 |
 
Drives: 2020 3LT Camaro 3.6L 1LE Join Date: Feb 2020
Location: San Diego
Posts: 306
|
Did you turn your rotors, or just swapped pads? You might have a glazed rotor that needs to be turned.
|
|
|
|
|
11-24-2024, 05:27 PM
|
#3 |
Drives: 2019 2SS Riverside Blue Join Date: Aug 2011
Location: Oklahoma
Posts: 417
|
I put new ceramics on all 4 after a rotor turn and still get a light squeal when backing out of the garage on humid days. On other days I don’t hear it.
|
|
|
|
|
11-24-2024, 09:21 PM
|
#4 |
    Drives: 2024 Riverside Blue 2SS 1LE Join Date: Mar 2016
Location: Fort Wayne, IN
Posts: 1,357
|
Have you tried buying new hardware, Brembo sells the pins and spring in kit.
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
