Homepage Garage Wiki Register Community Calendar Today's Posts Search
#Camaro6
Go Back   CAMARO6 > Engine | Drivetrain | Powertrain Technical Discussions > Transmissions


Bigwormgraphix


Post Reply
 
Thread Tools
Old 11-16-2024, 04:20 PM   #1
Speedspeedspeed
 
Drives: 2018 camaro
Join Date: Nov 2024
Location: Massachusetts
Posts: 8
My transmission mount snapped in half. How screwed am i?

So i used the transmission mount to jack up the car. Have done it several times before but today it snapped. Ok so clearly that isnt a jack point. I screwed up.

So i think i can simply unbolt it, purchase a new one and just bolt it back on right?

Pretty sure i can’t drive without it right? Just making sure.

Ultimately my question is how bad is this? The transmission itself looks fine.
Speedspeedspeed is offline   Reply With Quote
Old 11-18-2024, 01:58 PM   #2
bessen13
 
Drives: 2020 Camaro SS 1le
Join Date: Nov 2023
Location: Columbus, Ohio
Posts: 18
Quote:
Originally Posted by Speedspeedspeed View Post
So i used the transmission mount to jack up the car. Have done it several times before but today it snapped. Ok so clearly that isnt a jack point. I screwed up.

So i think i can simply unbolt it, purchase a new one and just bolt it back on right?

Pretty sure i can’t drive without it right? Just making sure.

Ultimately my question is how bad is this? The transmission itself looks fine.
This happened to me while I was putting my motor into my car and was using it as a jack point to hold the trans up. It's very easily replaceable but I wouldn't recommend driving it. My car made a grinding noise when I went to move it, almost like the input shaft wasn't on the correct plane.
__________________
______________________
2020 1SS 1LE M6
Riverside Blue Metallic

Forged Bottom End | KATECH PORTED HEADS | HCI | GPI LT NFC
bessen13 is offline   Reply With Quote
Old 11-18-2024, 03:43 PM   #3
Speedspeedspeed
 
Drives: 2018 camaro
Join Date: Nov 2024
Location: Massachusetts
Posts: 8
Quote:
Originally Posted by bessen13 View Post
This happened to me while I was putting my motor into my car and was using it as a jack point to hold the trans up. It's very easily replaceable but I wouldn't recommend driving it. My car made a grinding noise when I went to move it, almost like the input shaft wasn't on the correct plane.
Cool thanks! The transmission is pretty strong. You concerned it can be damaged?
Speedspeedspeed is offline   Reply With Quote
 
Post Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:23 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2026, vBulletin Solutions, Inc.