[Joshinator99]

Originally Posted by jollymon

Made a run up and down the Maine coast today. Cruised with wife to LL Bean to Christmas shop and slow rolled back down the coastal roads home. Consuming lots of fried clams, scallops, and ice cream... of course.

First big all day roadtrip with wife in the 1LE. Good times.

I’ve made that run in my Camaro as well! Portsmouth NH is always a favorite for us and it’s literally on the Maine border. Head up a bit further up the coast to Portland, Maine and there’s a nice distillery there too. I got a kick out of the sign on their HVAC ductwork.

[The Maverick]

Is that formula for an African or European swallow? 🤔

[Joshinator99]

Originally Posted by The Maverick

Is that formula for an African or European swallow? 🤔

[DamonZ28]

Made some nice snow foam today.

[Chutzpah]

Broke 10k miles after a nice long ride.

[LT1Zob]

Went for a long drive with my Camaro buddy. Had a great day

[flobb]

Attempted an I/M Readiness drive cycle. My battery drained back at the end of winter and I've driven about 1300 miles since. My plates need to be renewed in October.
O2S and EVAP are not ready. I need either one of them to reset. My understanding is it will pass with one sensor not ready.

An unmodified 2022 vehicle with ~4200 total miles not passing emissions inspection is mildly infuriating.

[willzilla]

Installed the BMR lower trailing arms onto my ZL1... Made a video out of it.



I've already installed the lower trailing arm, upper trailing arm, upper control arm, and toe rod on the passenger side but doing a video on each part for the drivers side



Once I finish all of the parts on the driver's side I'll finish suspension up with front and rear sway bars and end links

[SS_Don]

Installed the Umbra Sequential LED Taillights. For those interested they are on sale for $399.99 + 5% off if you are a first time customer. https://www.autoaddictusa.com/produc...ack-smoke-lens

[DriftR]

Originally Posted by SS_Don

Installed the Umbra LED Taillights. For those interested they are on sale for $399.99 + 5% off if you are a first time customer. https://www.autoaddictusa.com/produc...ack-smoke-lens

Love the plate and the tails do look good. Looking like Suffolk County? You making it to any of the car meets on the Island (so many popped up)... Smith Haven Mall Sundays or the Church in Patchogue every Tuesday are closest to me.

[SS_Don]

Originally Posted by DriftR

Love the plate and the tails do look good. Looking like Suffolk County? You making it to any of the car meets on the Island (so many popped up)... Smith Haven Mall Sundays or the Church in Patchogue every Tuesday are closest to me.

Thanks!

Yes Suffolk. Haven't made it to the those meets yet. Would like to go to the one at Smith Haven Mall but not this weekend, maybe next.

You Suffolk?

[Camrochris]

Originally Posted by neal_zack

As title suggests, this thread will be for 2016 Camaro owners to post pics what they worked on today, show off what they have done to their car recently, etc. Share and it might inspire some ideas for others to do on their Camaro's too.

So, what did you do to your 6th Gen today?

I had been wanting to replace the LED since July when it looked like water got in an it was burning out. It was either too darn hot or it was raining like 2 weeks in a row. What I saw was worse than I expected. It was green and there was crud all mover the connection. I had these installed by my dealer this past February. They said "sure bring it in". I asked how much and they wanted $50 to fix it. BS.
So today I bought a tiny ratchet set with all the right screwdriver bits for $19 and it cleared up just long enough to dry the street. So I fixed it.
I also finally ordered BMR end links front and rear. ($329). I am going to see how my 1SS feels with just that. If not I am going to install the Bilstein B-14 Nürburgring kit. It was awesome on my 2020 V6 Camaro...and I added a supercharger to the V6 so the weight was pretty much the same as the V8. I really miss how my V6 6speed handled. I want that same tossable feel in my current 2018 SS. If any of you have experience with a suspension kit they installed and really love, please let me know. I have the FE3 right now.

-camarochris

[DriftR]

Originally Posted by SS_Don

Thanks!

Yes Suffolk. Haven't made it to the those meets yet. Would like to go to the one at Smith Haven Mall but not this weekend, maybe next.

You Suffolk?

Yes, I live off North Ocean. The mall has gotten as big as the Tobay Beach show, but I'm painting the house this weekend. Anyway my last update to the Camaro was the 1LE wheels with Supercar 3 tires... great when the street is warm, spin when it's not. I suspect they will be bald soon and still have my LT2 IM on the to do list!

[SSShark]

I just got her back today from Florida High Performance in Boca Raton. I had kooks long tube headers, high flow cats, NGK plugs and a Rotofab intake installed. Tuned on 93 and E85. I am very happy with the numbers. Erik and the guys did a very nice job.