|
|
#1 |
![]() Drives: 2018 1LT Camaro 2.0 I-4 Join Date: Oct 2018
Location: Mississauga, ON
Posts: 57
|
Fromt Bumper Solutions, Anyone?
Hello,
My front bumper clip is broken, which makes it pop out slightly at times. I can't replace the bumper or take it off (as the other clip was glued). Any recommendations on how i can fix it? Thanks |
|
|
|
|
|
#2 |
![]() Drives: 2019 Camaro 1SS1LE Join Date: Jan 2024
Location: Utah
Posts: 370
|
If you're not doing some kind of conversion kit like SS to ZL1, you can get an OE style bumper just about anywhere. Summit Racing, American Muscle, some OE body parts.com places. Work with a local body shop for a paint estimate, don't cheap out on the flex additive.
__________________
2019 1SS1LE M6 Shadow Gray Metallic
ProCharger D1X Race Kit - 4.25" Pulley || GPI Pistons/Rods - ACL Bearings - ARP Hardware || LME Timing Chain Guide || Katech C5R Timing Chain || Katech OE Spec Billet Oil Pump || OE Ported Heads || CHE Trunnion Upgrade || BTR 220 Cam - BTR .660" Dual Springs - GM Racing "Caddy" Lifters - BTR 3/8" Pushrods (7.825") || ATI Balancer || LT4 Injectors || LT4 HPFP || JMS BAP || DSX Flex Fuel || LT2 Intake Manifold || LTH (Catless) || Stainless Works Redline Series NPP || 91 + 8oz Boostane 7/26/2024 Tuning in progress |
|
|
|
|
|
#3 |
![]() Drives: 2022 2LT RS Convertible Join Date: Apr 2021
Location: Upper Mid-West
Posts: 306
|
If you want a cheap out and can't replace the bumper. Try super glueing it on just clamp the corner up till it sets up. You have nothing to lose but time.
|
|
|
|
|
|
#4 |
![]() Drives: 2018 1LT Camaro 2.0 I-4 Join Date: Oct 2018
Location: Mississauga, ON
Posts: 57
|
I do want to cheap out because eventually I will look for a conversion kit, so thank you! Do you have any recommendations on what super glue is going to hold it? I used one but it did not work
|
|
|
|
|
|
#5 |
![]() Drives: 2020 Callaway Camaro SC630 Join Date: Feb 2020
Location: Pennsylvania
Posts: 332
|
Use a two-part epoxy. Gorilla Glue and others make 1000 to 2000 pound quick-dry versions.
__________________
2020 Callaway Camaro SC630 - MN6 1SS Satin Steel Gray
2019 Callaway Corvette SC757 - MN7 1LZ Elkhart Lake Blue |
|
|
|
|
|
#6 |
![]() Drives: 2021 2SS red-line Camaro Join Date: Jan 2018
Location: Phoenix, AZ
Posts: 65
|
I would go to an autobody paint supply store. They have solutions for those problems.
|
|
|
|
|
|
#7 |
![]() Drives: 2018 1LT Camaro 2.0 I-4 Join Date: Oct 2018
Location: Mississauga, ON
Posts: 57
|
10 bucks spent. Looking good so far. Will keep you all posted
|
|
|
|
|
|
#8 |
![]() Drives: 2018 2SS M6 Hot Wheels Camaro Join Date: Mar 2017
Location: MA
Posts: 642
|
Hopefully this does the trick for a long time.
__________________
2018 2SS M6 Hot Wheels Camaro loaded (Moonroof, Magnetic Ride Control, NPP, etc…)
Previous cars: 2017 1SS Nightfall Gray Metallic w/A8 and NPP 1988 IROC-Z (tons of mods), 1995 Z28, 1998 Z28, 2006 GTO, 2010 Camaro 1SS, 2015 Subaru STI, a couple Acuras and multiple Jeeps. |
|
|
|
|
|
|
|
|
Post Reply
|
|
|