|
|
#1 |
![]() Drives: 23 Camaro ZL1 Join Date: Mar 2023
Location: Massachusetts
Posts: 65
|
Rusty Brakes
My ZL1 tends to sit in a garage for long periods of time after I wash it. Any suggestions on how to prevent the brakes from getting rusty? I took it out Sunday, and they sounded and felt horrible… it improved after driving it for a while, but I want to prevent this from happening again.
|
|
|
|
|
|
#2 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2022 1SS 1LE A10 BCD WCT+PDR Join Date: Mar 2008
Location: Johnstown, PA
Posts: 3,747
|
The owners manual mentions this. The pads are semi-metallic, so when you wash it the pads can rust bond to the rotors. Best way to prevent it is to go drive it and get the brakes hot.
__________________
2022 1SS 1LE A10 BCD WCT+PDR2014 1SS 1LE NPP RECARO SIM-SOLD1995 Z28 M6 GSC PGM-SOLD1975 NOVA COUPE 300HP 350 TH350 FLASH RED-SOLD
"KEEP THE FAITH"-Fbodfather |
|
|
|
|
|
#3 |
![]() ![]() ![]() Drives: 2023 ZL1 - All Bolt On's Join Date: Dec 2022
Location: Columbus, Ohio
Posts: 1,188
|
Mine did the same, immediately after washing and I wash mine once a week. It happens with in about 30 minutes after washing and start drying. As soon as I drive mine a bit, the rust is gone, but I do end up with the rust/dust on the inside on the wheels. I now use my car dry on the disc brakes first and was able to cut down on the oxidation. This is the car dry I use:
__________________
2023 ZL1 A10-Stainless Works 2" Long Tubes & Legend NPP Axle Back•GESI UHO 4.5" CATs•RF BigGulp•Kong 103mm & X-Ported Blower•Griptech 2.30" Upper•ATI Super Damper w/9.45" Lower•THPSI Port Injection w/875cc Injectors•FI Interchillers Stage 2•Brisk RR14S Plugs•Granatelli Malevolent Coils•Katech Low Profile Billet Valve Covers•Katech Duel Fuel Pump•MM Wild 1000HP•DSX Flex Fuel Kit•DSX Billet Lid•DMS 2gal Fender Tank•BMR Cradle Lockout•Weld Solana 18x8 Fronts/17x10 Beadlocks MT ET ST R's•Unlocked TCM•E85=785rwhp/691rwtq +21psi | 1/4=10.5005 @134.21 60ft=1.6182, 1/8=6.8373 @106.11
Last edited by 2023_ZL1-AUTO; 07-30-2024 at 06:39 AM. |
|
|
|
|
|
#4 |
![]() ![]() ![]() Drives: 2021 Camaro ZL1 A10 Join Date: Nov 2018
Location: Idaho
Posts: 1,240
|
After you wash it lightly ride the brakes when you pull it into the garage. It will work even better if you back up 30 ft then pull in, lightly riding the brakes the whole time. That gets all the rust off and prevents the pads from sticking to the rotors when it sits.
__________________
2021 Camaro ZL1 A10
2022 GR Supra 3.0 Past: 2018 Mustang GT Premium w/ PP1, MR, and A10 2007 MazdaSpeed3 1995 Pontiac Trans Am 1987 Camaro Z28 |
|
|
|
|
|
#5 |
![]() Drives: 23 Camaro ZL1 Join Date: Mar 2023
Location: Massachusetts
Posts: 65
|
unfortunately the roads are terrible in my area, soot defeats the purpose of washing my car, but thank you for the info.
|
|
|
|
|
|
#6 | |
![]() Drives: 23 Camaro ZL1 Join Date: Mar 2023
Location: Massachusetts
Posts: 65
|
Quote:
|
|
|
|
|
|
|
#7 | |
![]() Drives: 23 Camaro ZL1 Join Date: Mar 2023
Location: Massachusetts
Posts: 65
|
Quote:
|
|
|
|
|
|
|
#8 |
![]() Drives: 23 Camaro ZL1 Join Date: Mar 2023
Location: Massachusetts
Posts: 65
|
Another question, what are you using for wheel cleaners?
|
|
|
|
|
|
#9 |
|
Super Stock
Drives: Chevrolet Camaro ZL1 Join Date: May 2022
Location: Concordia
Posts: 783
|
Pressure washer to get the major crap off, car soap, and then pressure wash it all off again.
__________________
2017 Red Hot ZL1 A10 - Apex ARC-8's, 305/ 325 PS4's, DSX 9.06 12% lower, Griptec 2.5 upper, NGK HR7 Ruthenium plugs, Nostrum 22+ injectors, XDI Goliath HPFP, Katech dual in tank low side pump, Katech oil pump, LME tensioner, DOD delete, LT1 big fuel cam, Jokerz ported blower, MPI lid, GMS hood extractor bracket, Soler ported 87mm (91mm eff) TB, Granatelli SS plug wires, Cordes LTR reservoir, DMS T-stat housing, 186* LS3 T-stat, Black Widow Angry Housewife/ Corsa NPP mufflers, Borla X pipe, BMR engine mounts, Banks iDash, Lithium Battery, AEM X- Series, HP Tuners, E85, 16.5 psi
834 HP/ 840 TQ |
|
|
|
|
|
#10 |
|
Thank you Al Oppenheiser!
Drives: Red Hot A10 ZL1 Convertible Join Date: Jun 2017
Location: Sarasota, FL
Posts: 5,156
|
To avoid rotor rust, don't wash the car after driving when the brakes are hot. And don't put it away wet.
I use a battery powered leaf blower. Works great. Ceramic and hydrophobic coatings. And powerstop z26 pads. Don't have to clean very often. When i do, Adams car shampoo and a microfiber towel does the job. |
|
|
|
|
|
#11 |
![]() Drives: 2023 ZL1 Join Date: Jan 2023
Location: TN
Posts: 47
|
Spray Hyde’s rust serum on the rotors after you wash the wheels and like magic no more rust. Been using it for years and never had a rotor rust.
|
|
|
|
|
|
#12 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 13,152
|
A short drive is enough to scrape off the surface rust and warm up the rotors a bit to make sure no moisture is retained. Heck you can just drive up and down your driveway or street a few times, riding the brakes when slowing down.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 Last edited by arpad_m; 07-30-2024 at 07:15 AM. |
|
|
|
|
|
#13 | |
![]() ![]() ![]() Drives: 2023 ZL1 - All Bolt On's Join Date: Dec 2022
Location: Columbus, Ohio
Posts: 1,188
|
Quote:
I use Hyde's also!
__________________
2023 ZL1 A10-Stainless Works 2" Long Tubes & Legend NPP Axle Back•GESI UHO 4.5" CATs•RF BigGulp•Kong 103mm & X-Ported Blower•Griptech 2.30" Upper•ATI Super Damper w/9.45" Lower•THPSI Port Injection w/875cc Injectors•FI Interchillers Stage 2•Brisk RR14S Plugs•Granatelli Malevolent Coils•Katech Low Profile Billet Valve Covers•Katech Duel Fuel Pump•MM Wild 1000HP•DSX Flex Fuel Kit•DSX Billet Lid•DMS 2gal Fender Tank•BMR Cradle Lockout•Weld Solana 18x8 Fronts/17x10 Beadlocks MT ET ST R's•Unlocked TCM•E85=785rwhp/691rwtq +21psi | 1/4=10.5005 @134.21 60ft=1.6182, 1/8=6.8373 @106.11
Last edited by 2023_ZL1-AUTO; 07-30-2024 at 07:20 AM. |
|
|
|
|
|
|
#14 |
![]() Drives: Sharkskin Metallic ZL1 Join Date: Mar 2023
Location: S.E. MI
Posts: 92
|
I wash my wheels 1st, separate bucket of water of course, then driving down the road and back just far enough to get the brakes heated up and dry. Then i wash my car and keep the water off of the wheels and rotors as much as possible. No rust issues, and my car will sit for a few days or whatever, depending on the weather and my work schedule.
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|