|
|
#1 |
![]() Drives: Chevrolet 2SS Camaro Join Date: Feb 2024
Location: Pennsylvania
Posts: 4
|
2024 Factory Paint Issue
Has anyone else who purchased a 2024 finding dirt in their paint? Mine has dirt in the paint on the hood and also on the Majestic Black Rims. There is awful orange peel also.
I love my car, just very disappointed for the price in the quality of the paint job. I have had many comments about the poor quality of the paint. Last edited by Sgregg; 05-03-2024 at 11:34 PM. |
|
|
|
|
|
#2 |
![]() |
dust nibs are in all paints. I have them and if they bother you that bad wet sand them off and polish it out. Or take to a detailer who knows how to fix it.
All cars have orange peel and its part of the design. If it was perfect flat paint you would see WAY more imperfections unless it was a 100k hand paint job sanded to perfection and then as soon as you touch it. It will show way more scratches than the orange peel version. I am sure most of the comments are from people who dont know anything.
__________________
2022 1SS 1LE 6M in Riverside blue
Found exact build local- ETA 7/31/22 New ETA - 7/26, 7/30, 7/31, 8/1, 8/8, 8/15, 8/21, 8/28, 9/17 8/24. IT HAS ARRIVED at the dealer 8/25- It is in the Garage ACS ZL1 Sideskirts, 20% tint, CAI Intake |
|
|
|
|
|
#3 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 13,449
|
A compromise is indeed necessary, achieving paint perfection the way Koenigsegg and others do is extremely expensive.
However, one may argue that GM went for a low, very cost efficient quality target and could at least offer improved quality (say, some "post-processing" aka paint correction similar to what detailing shops offer) as an option. My paint was pretty good out of the factory, by the way. Of course it had everyone's "favorite" orange peel, but at least no flaws or big dust nibs. The previous Camaro I owned had a big chunk near the roof edge.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle Terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
|
|
#4 |
![]() Drives: 2020 Chevrolet Camaro Coupe 2SS 1LE Join Date: Feb 2020
Location: Nevada
Posts: 309
|
I think I have an eye lash in mine right behind the right rear window. And some other little pieces of something in there. The more you look closely the more you will see.
|
|
|
|
|
|
#5 |
![]() ![]() ![]() Drives: 24 LT1 M Join Date: Oct 2015
Location: North/Central FL
Posts: 1,122
|
I have a couple of nibs here and there but not noticeable unless you're really looking for them. And the orange peel is to keep the paint protected, once you start removing it then you're taking that clear coat away.
__________________
24 LT1 M6 Sharkskin Metallic
22 Mazda CX-30 |
|
|
|
|
|
#6 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 23 ZL1 A10 Rapid Blue Join Date: Aug 2020
Location: MO
Posts: 2,257
|
I can't think that ive had any negatives on my 23.
|
|
|
|
|
|
#7 |
![]() ![]() ![]() Drives: 24 LT1 M Join Date: Oct 2015
Location: North/Central FL
Posts: 1,122
|
On a 23 that I had, the paint was really bad under the hood and noticeable issues around the window seal near the A-pillar.
__________________
24 LT1 M6 Sharkskin Metallic
22 Mazda CX-30 |
|
|
|
|
|
#8 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 23 ZL1 A10 Rapid Blue Join Date: Aug 2020
Location: MO
Posts: 2,257
|
the paint under the hood
|
|
|
|
|
|
#9 |
![]() ![]() ![]() Drives: 24 LT1 M Join Date: Oct 2015
Location: North/Central FL
Posts: 1,122
|
Yes, under the hood. Paint runs and paint that was peeling off.
__________________
24 LT1 M6 Sharkskin Metallic
22 Mazda CX-30 |
|
|
|
|
|
#10 |
![]() Drives: 2024 2SS vert w/M6 & Dual Mode. Red Join Date: May 2023
Location: NJ
Posts: 236
|
I consider myself lucky since the paint job on my 24 2SS vert is great. When I bought new Corvettes in the 70s, the paint was horrific. Lacquer. St.Louis built. That changed for the better when the end of the C3 run were made at the new Bowling Green plant.
I had a 1991 GMC Jimmy 4 dr 4X4 that came out the plant with nearly no clear coat.I always hand washed it with Blue Corral mild detergent and hand waxed it with non-abrasive wax. The red paint would come off on the applicator. It would dull out in a matter of weeks- all of this on a garaged vehicle. The zone office authorized new basecoat/clearcoat on the hood and roof. |
|
|
|
|
|
#11 |
![]() Drives: '22 2SS 1LE Join Date: Nov 2023
Location: NorCal
Posts: 205
|
i have a 2022 with a long black hair baked into the clearcoat of my front bumper. merica.
|
|
|
|
|
|
#12 |
![]() Drives: 2022 Camaro LT1 A10 Join Date: Nov 2015
Location: new england
Posts: 639
|
Yeah, my 2022 paint sucks. Chips easy and there's a couple spots down to the white from rocks or whatever. There's even a small section that looks like it's bubbling? Oh and on top of that, it's my first black car. I always wanted a black car. Thought it would never look dirty. Boy, was a seriously wrong.
__________________
2022 Camaro LT1 A10 - Drag Pack/Corsa double X pipe/AWE track axleback -11.849@118.67MPH/1.798 60'
|
|
|
|
|
|
#13 |
|
2020 Shadow Gray 2SS
Drives: 2020 2SS - A10, NPP, MRC, CAI Join Date: Dec 2019
Location: SoCal
Posts: 3,816
|
Really? I thought it was very common knowledge that black cars are the hardest to keep clean because they show absolutely everything...
__________________
2020 SGM 2SS - A10, NPP, MRC, Red Calipers, Black Fender Badge, Footwell Lighting
After delivery: - GMP CAI, GMP Black Strut Tower Brace, MRR017 1LE Wheels, SS Armrest, Black Fuel Door, Stainless Pedals, SS Wheel Caps, GM Splash Guards, DD Smoked LED Markers, Smoked Rear Reflectors, Mishimoto Catch Can, Xpel PPF-Full Front & Rockers, 35% Tint, CeramicPro coated, RST Stainless Brake Lines, Castrol SRF, MSD Plug Wires, Mamo V3 Ported TB Left: My "fun" ride (475 HP). Right: My "work" ride (52,000 HP): a Gulfstream G600. One's top speed is 180 Mph, the other, 620 Mph. BOTH AWESOME to operate... |
|
|
|
|
|
#14 | |
![]() Drives: 2022 Camaro LT1 A10 Join Date: Nov 2015
Location: new england
Posts: 639
|
Quote:
__________________
2022 Camaro LT1 A10 - Drag Pack/Corsa double X pipe/AWE track axleback -11.849@118.67MPH/1.798 60'
|
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|