[2SS Capt]

Originally Posted by KC64

Ordered the StoNSho,,, should have done that on day one even before I had the plates. I do not drive much and put thick tape over the plastic bracket license bracket that came with the car, and the center piece has PPF on it so I am hoping the paint is fine. Taking front plate off in the AM. The StoNSho should be a must have!, JMO!

I've had a Sto-N-Sho from the very beginning, don't think I've ever actually driven with it on, but it is always in my trunk and the old "Oh shoot, I just left a car show, it is in my trunk, I forgot to put it back on, I'll put it on right now" or "Oh shoot, I just washed the car and took it off so it would be out of the way and forgot about it, it is right in my trunk and I'll put it on right now" is fully queued up!

[CalgaryZL1]

Originally Posted by IndyZrider

For the height would you mind putting the bottom of the ruler on the bottom of the emblem please? And thanks a bunch!

They are 3/4” tall.

[sklippi2018]

Originally Posted by 2SS Capt

I've had a Sto-N-Sho from the very beginning, don't think I've ever actually driven with it on, but it is always in my trunk and the old "Oh shoot, I just left a car show, it is in my trunk, I forgot to put it back on, I'll put it on right now" or "Oh shoot, I just washed the car and took it off so it would be out of the way and forgot about it, it is right in my trunk and I'll put it on right now" is fully queued up!

My thoughts exactly!

[BlackbeastSS2]

Originally Posted by sklippi2018

My thoughts exactly!

That’s a good idea! Sorry officer I forgot to put my plate back on.

I have the 2019 terrible placement of the Chevy flow tie on bumper. I just cover it up with my plate.

[IndyZrider]

Originally Posted by CalgaryZL1

They are 3/4” tall.

Ty very much sir!

[KC64]

Originally Posted by BlackbeastSS2

That’s a good idea! Sorry officer I forgot to put my plate back on.

I have the 2019 terrible placement of the Chevy flow tie on bumper. I just cover it up with my plate.

Ordered the new holder last night and just finish washing the SS and taking off the crappy license plate holder. A small two marks on the PPF but that sh!! Buffed out of there!!!!

Oh ya ^^^^ nice Hp #s!!!

[ItsChristianInHD]

I had to invest into an NPC mobile. I’m a traitor for not buying GM again, lol.

No, I didn’t sell the Camaro.

[arpad_m]

Originally Posted by ItsChristianInHD

I had to invest into an NPC mobile. I’m a traitor for not buying GM again, lol.

No, I didn’t sell the Camaro.

Boring, boring, booooring ...but then who am I to talk after buying a cheapo Altima for the oldest kid, haha

[KC64]

Originally Posted by ItsChristianInHD

I had to invest into an NPC mobile. I’m a traitor for not buying GM again, lol.

No, I didn’t sell the Camaro.

What is it?? I have owned a Tundra since 2012, just sold it in January. Toyotas that we have owned and the wife still drives we have never had issues and if anything ever came up they fixed ASAP.

[Curr]

Put in a Rotofab CAI today (the "no tune" one which I bought from another member here, but not until after buying $120 in hardware after he said "yeah it's all there"; thank goodness Rotofab has awesome CS).



I'd say it bumped up the s/c whine from about a 3 to a 5 in volume. Good enough for me for now.

Quick check on the s/c noise...

Figured while I was there I would yank out the rain / snow deflector. Wow, what a pain getting that out... I literally did end up yanking out the last (bottom) connector. Getting the bolts on the hood latch isn't too much fun when you have sausage fingers with XL hands. Ratcheting wrench helps a ton. (1/2" btw)

Put in the Diode Dynamics smoked LED side markers. Nice little upgrade, like the contrast.



Moved my Uniden R7 over to the left about an inch so I can see the arrows, and installed a dash cam, Viofo A139 Pro 4k to the right of it. (Vid above)

[david_acm]

Installed a couple theft deterrents, skip shift eliminator, fixed a couple trim pieces, and removed the front tire air deflectors.

Removing the deflectors plus having the car in the air for a bit made me realize just how tall the stock ride height is. I'm thinking my next major mod will be to lower the car a fraction of an inch. The GM lowering kit (Part #84225254) with springs and shocks apparently lowers it by 20mm or just over 3/4 of an inch. Now the research begins to see if there's something better aftermarket (not sure what "better" means here since I'm new to this) or if OEM is the way to go.

[SSShark]

Originally Posted by david_acm

Installed a couple theft deterrents, skip shift eliminator, fixed a couple trim pieces, and removed the front tire air deflectors.

Removing the deflectors plus having the car in the air for a bit made me realize just how tall the stock ride height is. I'm thinking my next major mod will be to lower the car a fraction of an inch. The GM lowering kit (Part #84225254) with springs and shocks apparently lowers it by 20mm or just over 3/4 of an inch. Now the research begins to see if there's something better aftermarket (not sure what "better" means here since I'm new to this) or if OEM is the way to go.

I think I'm headed in the same direction. I'm transitioning to the 1LE wheel/tire setup and it ooks like to only way to lesson the top wheel gap will be to install a lowering kit. I'm leaning towards the same GM factory kit.

[KC64]

@Curr like that SuperCharger sound!

[david_acm]

Originally Posted by SSShark

I'm leaning towards the same GM factory kit.

Neat! If you do end up getting it sooner than me, post pics! I've severely broken my "1 major mod per year" rule so I think I'll hold off until I do all my homework and learn what else is out there.