[White1SS]

Originally Posted by havelegs

Just got my M017's installed, 20x10 with 285/30/20 on the front, backs are staggered; 20x11 305/30/20.

The back wheels seem good but the front does have a bit of poke and was wondering how I can make this more flush, if possible:

Attachment 1149197

Do you have any photos of the rear ? I was thinking of going with the same rims with a 315/30/20 and was wondering if they would poke in the rear. The 315 is about a 1/4" wider than the 305, so about an 1/8" more outside poke.

[havelegs]

Originally Posted by White1SS

Do you have any photos of the rear ? I was thinking of going with the same rims with a 315/30/20 and was wondering if they would poke in the rear. The 315 is about a 1/4" wider than the 305, so about an 1/8" more outside poke.

The rear is just about flush at the top of the wheel

[atx_traveler]

put some camber in it. -2 should help it be flush with the fender.

[2SS Capt]

Originally Posted by atx_traveler

put some camber in it. -2 should help it be flush with the fender.

But if you aren't tracking it you are going to eat up the inboard portion of your tires, yeah, no poke but holy tire wear Batman...

[White1SS]

Originally Posted by havelegs

The rear is just about flush at the top of the wheel

Attachment 1149284

Attachment 1149285

Attachment 1149286

Thanks for the photos !


A 315 should be ok, it's only another 1/8" or so of outer width. I'm not sure a 315 would look any better though, I'm starting to think a 305 is the perfect width for these cars.

[havelegs]

Originally Posted by White1SS

Thanks for the photos !


A 315 should be ok, it's only another 1/8" or so of outer width. I'm not sure a 315 would look any better though, I'm starting to think a 305 is the perfect width for these cars.

Yeah the 315 would fit, but you'd also for sure have move the wiring harness on the drivers rear. The 305 looks great, has a lot of width and is aggressive looking from the rear.

[2SS Capt]

Originally Posted by havelegs

Yeah the 315 would fit, but you'd also for sure have move the wiring harness on the drivers rear. The 305 looks great, has a lot of width and is aggressive looking from the rear.

I think the wiring harness really comes into play If you have 35 profile on the rears and you are in the 300s on width back there.. (305/35 or 315/35). A 315/30 is only 3mm (~ 1/10") taller than a 305/30...