[Nothing like an SS]

Originally Posted by The Maverick

Correct - they make this one for the ZL1 and 1LE applications:

Well there you go!

[Deacon Blues]

I've been looking to get one. I might forgot the whole kit though, it doesn't look like the jack will work with the zl1addons lift pads installed.

[CalgaryZL1]

Originally Posted by Deacon Blues

I've been looking to get one. I might forgot the whole kit though, it doesn't look like the jack will work with the zl1addons lift pads installed.

The jack should fit, most are about 4 1/2 minimum to 16 inch, just need a pc of rubber or something non slip between. Not sure about quality though.

[Deacon Blues]

Originally Posted by CalgaryZL1

The jack should fit, most are about 4 1/2 minimum to 16 inch, just need a pc of rubber or something non slip between. Not sure about quality though.

I think the issue I see is that the jack looks designed for the pinch weld already.

[ariZona28]

Originally Posted by Whoomba

Will the top go down over it?

According to my buddy it will.

Originally Posted by Nothing like an SS

Excludes ZL1, I would assume it also excludes SS 1LE, same staggered tire/wheel sizes, and the e-diff. I'm thinking that tire would be quite dangerous on any axle. I will stick to plugs, goop, etc.

I agree, the peace of mind would be nice, but driving on that would not give me peace of mind, either.

No need to be apprehensive, it's a good quality Pirelli tire. Sure, you don't want to do any Auto X or Roadracing with it installed but it's more than adequate to get you home or to the tire shop.

[FactoryMatt]

need a collapsed inflatable kit like porsche used to supply. 18in x 5 rim with a 26 or 27od donut that you air up with a pump.