[Bobby65Chevy]

Originally Posted by arpad_m

I finished the first test wash about an hour ago, and this thing is ***** amazing. TDS down to zero, water nicely rolling off the car and no spots after rinsing. Skipping the drying phase helps with "quality control", too, I got to see where I accidentally left bits of dust and dirt in place.

It was a bit nerve wracking to leave water on the car after all these years of trying to stay out of the sun and drying/wiping almost immediately, but the paint is super clean and truly spotless, very impressive. Saved me a ton of time and towels, too.

During the short "brake rust scrape off" drive afterwards I rolled the windows all the way down and back up, which of course smeared them with water, but it disappeared in 30 seconds leaving nothing behind (unlike before, when this meant having to clean them again).

The only regret I have is why the hell didn't I buy it sooner

Yes these are an awesome system. I just got done mounting and plumbing mine in. I have the same one you got just cut the cart off and mounted it to the wall. Now I have this little car wash station so I don't have to set it up every time which will be nice.

[CalgaryZL1]

Originally Posted by Bobby65Chevy

Yes these are an awesome system. I just got done mounting and plumbing mine in. I have the same one you got just cut the cart off and mounted it to the wall. Now I have this little car wash station so I don't have to set it up every time which will be nice.

Looks good! Do you use the filtered water for the whole wash process or just the final rinse? I’m guessing there’s a maximum flow rate to allow the beads to do their thing in the filter process.

[mpride]

Originally Posted by GroundhogSS

Did a little camouflage on my Mobilistics relay. I think I may print it out again and trim it a little better. I have the .jpg if anyone wants it.

I now have 2 cars using their starter relays. I took off the stickers that were on the relays so they would blend in better but this is a great idea. If you don't mind I would like to get a copy of the file. You can send it to markpride63@gmail.com. Thanks!

[Bobby65Chevy]

Originally Posted by CalgaryZL1

Looks good! Do you use the filtered water for the whole wash process or just the final rinse? I’m guessing there’s a maximum flow rate to allow the beads to do their thing in the filter process.

I just use it for the final rinse. I did try it once using it for the whole wash and the outcome was the same so I just do final rinse to make the media last longer.

[Slip3Kid]

Originally Posted by mpride

I now have 2 cars using their starter relays. I took off the stickers that were on the relays so they would blend in better but this is a great idea. If you don't mind I would like to get a copy of the file. You can send it to markpride63@gmail.com. Thanks!

I would like to get a copy of this also. Can you attach it to a private message pls.

Thanks

[Zapote21]

Added AWE track edition exhaust and replaced the rear reflectors

[Camby]

Originally Posted by Bobby65Chevy

Yes these are an awesome system. I just got done mounting and plumbing mine in. I have the same one you got just cut the cart off and mounted it to the wall. Now I have this little car wash station so I don't have to set it up every time which will be nice.

Can I get a like to that handy wall mounted pressure washer accessory holder?


Sent from my iPhone using Tapatalk

[Bobby65Chevy]

Originally Posted by Camby

Can I get a like to that handy wall mounted pressure washer accessory holder?


Sent from my iPhone using Tapatalk

https://www.amazon.com/dp/B0CNLVFLRT...t_details&th=1

[FactoryMatt]

Likewise shifter from Australia (needs their 14mm adapter) and CarMounts phone mount.

[z28pat]

Got my windows tinted, 15% tint.

[Texas1ss]

Took mine out, like I often do, after doing a hard damn job for a client of mine to release some steam.

Often joke with my family and friends that my Camaro is my therapist. My world can be going nuts, deadlines and bullshite, but when I can just get out and cruise for a bit, or do some spirited driving, all is well and the peace comes back.

Not bad for $530 a month. I've heard therapy is expensive anyway, and honestly talking to a stranger about my "feelings" creeps me out. What if they are the one that is a nutter? I prefer my clutch and gas pedal and rowing gears. Shame they're leaving us after this year. I don't think an EV Camaro for me is going to cut it.

[speedyink1]

Same here, I have a very stressful job. Getting into the Camaro at the end of the day and going for a bit of an extended drive before going home just makes all that melt away.

It's my emotional therapy car, lol

[Texas1ss]

Originally Posted by speedyink1

Same here, I have a very stressful job. Getting into the Camaro at the end of the day and doing for a bit of an extended drive before going home just makes all that melt away.

It's my emotional therapy car, lol

Great to know I'm not the only one. It really clears my head. And I'm stealing "emotional therapy car" btw. Love it. Lol.

[keep_hope_alive]

Met with the dealer on a few close-out items from the warranty engine replacement.

Now there is a high-speed CAN error associated with the GPS/On-Star/Compass circuit. Because I've installed a break-out harness that intercepted the factory plugs into the radio, it's my problem to solve (i.e. not warranty). Fair enough, I touched it, I own it. I removed the breakout harness and plugged the factory harness back in and have the same issues, but I suspect the tech is correct that what we have is a slight pin alignment issue.

The Micro 64 and Micro 50 pins are sensitive to pin retention and thus increased resistance for high speed CAN.