[mlee]

Adding this mod to the thread.

The Carbon Fiber style shifter looks much better with this interior

[mlee]

ZL1 Add-ons lift pads to all 4 corners. I have the mag puck that lifts both front and rear tires but never can get a shop tech to use it.

Never trust shop techs.

Got these from Phastek https://www.phastekperformance.com/Z...a-01112304.htm

[Brettallen59]

I have blocks on mine also. These pictured were the first ones I bought, but I found the ones like yours and purchased those since the quality was much better. I pulled these off and installed black ones just like yours.
Brett....

[Bumbleboy92]

Originally Posted by mlee

Adding this mod to the thread.

The Carbon Fiber style shifter looks much better with this interior

Attachment 1148319

Attachment 1148318

Attachment 1148320

Attachment 1148321

Not a fan of the suede? I swapped mine but kept the suede shifter with cf top

[mlee]

Originally Posted by Brettallen59

I have blocks on mine also. These pictured were the first ones I bought, but I found the ones like yours and purchased those since the quality was much better. I pulled these off and installed black ones just like yours.
Brett....

I have an older variation on my 2019 as well but really use the magnetic puck in the center for myself. I do use the fronts when swapping the camber over on the ZLE.

Originally Posted by Bumbleboy92

Not a fan of the suede? I swapped mine but kept the suede shifter with cf top

Oh... now there's an idea. How do you get the top off?

[Bumbleboy92]

Originally Posted by mlee

I have an older variation on my 2019 as well but really use the magnetic puck in the center for myself. I do use the fronts when swapping the camber over on the ZLE.

Oh... now there's an idea. How do you get the top off?

I followed this video but found I didn’t need to do complete disassembly, just had to be careful not to damage the silver ring



Here’s the video I took when replacing my silver ring, not as good quality but hopefully makes sense

[mlee]

Originally Posted by Bumbleboy92

I followed this video but found I didn’t need to do complete disassembly, just had to be careful not to damage the silver ring



Here’s the video I took when replacing my silver ring, not as good quality but hopefully makes sense

Cool... I'll get right on that when I get the car back from PPF

[mlee]

1st Unscheduled Service to replace a dead battery. No matter how much I charged it would not start without a jump.

[mlee]

Finally got Panthr out of the garage yesterday. Loving this paint!!!

[ZPirate]

Sweet looking Panther!

[CalgaryZL1]

The wheels, the tail lights and that paint, all tie together very well. looks great!

[DamonZ28]

Wow, that does look pretty good.

[Mr Twisty]

It's a beauty! Did that tow hook come with the car?

[mlee]

Originally Posted by ZPirate

Sweet looking Panther!

Thanks!!

Originally Posted by CalgaryZL1

The wheels, the tail lights and that paint, all tie together very well. looks great!

It was well thought out for what they had to deal with. The best parts available

Originally Posted by DamonZ28

Wow, that does look pretty good.

Originally Posted by Mr Twisty

It's a beauty! Did that tow hook come with the car?

No... got that from Phastek. Raceng tow hook