11-04-2023, 01:40 AM | #57 |
Drives: 2018 Camaro SS 1LE Join Date: Jul 2018
Location: Stuttgart, Germany
Posts: 827
|
543 miles covered...break in complete...Motul going in! Also on the 5th tune...
Very surprised no issues thus far...lucky?
__________________
|
11-04-2023, 01:55 PM | #58 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,325
|
amazing how OEM the setup looks.
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
11-10-2023, 03:35 PM | #59 |
Drives: 2018 Camaro SS 1LE Join Date: Jul 2018
Location: Stuttgart, Germany
Posts: 827
|
oldman: keeps the Germans away. :-)
Crossed 1000 miles with a data log of near 6900 rpm and 9.5 psi. Pulls quite nicely in third! Still tuning thanks to Jannetty.
__________________
|
02-08-2024, 02:49 PM | #60 | |
Drives: 2018 Camaro SS 1LE Join Date: Jul 2018
Location: Stuttgart, Germany
Posts: 827
|
We're getting there! Flywheel has now been replaced and back on the ground...waiting for the salt to disappear. Then back to the dyno!
__________________
|
|
03-10-2024, 09:23 AM | #61 |
Drives: 2018 Camaro SS 1LE Join Date: Jul 2018
Location: Stuttgart, Germany
Posts: 827
|
2200 miles on the combination. Will install new plugs prior to Friday's dyno visit.
[url] If all goes well, Nurburgring opens on 16 Mar and we have a track day reserved at SPA on 25 Mar (hope for no snow in Belgium!)
__________________
|
03-14-2024, 04:46 PM | #62 |
Drives: 2018 Camaro SS 1LE Join Date: Jul 2018
Location: Stuttgart, Germany
Posts: 827
|
Plugs installed...driver's side takes 20 mins...passenger side takes 2 hours...thanks to dropping the plug socket - Ack!
Bit of oil on #7 threads...otherwise looks a ok. Also heard a phantom tap on odd side of the engine...so pulled the valve cover and rockers for a look see: Nothing out of the ordinary - all Ti lash caps present, no broken springs, rocker arm tips are like new, etc. Will gather the kit for tomorrow's visit to the heart breaker. Temps are warmer than before (55 degrees) otherwise a constant.
__________________
|
03-15-2024, 06:08 AM | #63 |
Drives: 2018 Camaro SS 1LE Join Date: Jul 2018
Location: Stuttgart, Germany
Posts: 827
|
Gave it a wash (cleaner cars are faster!) and dropped by the engine shop that assisted us in this adventure - ABD Racing:
He was genuinely happy we showed him the final product...always wonder how many projects are completed when they reach a 'machine shop' state. I try to pay it forward a bit for the next guy...not many folks will open up their knowledge and behind the desk to show a 15-17 year old how things work - very nice German.
__________________
|
03-16-2024, 12:22 PM | #64 |
Drives: 2018 Camaro SS 1LE Join Date: Jul 2018
Location: Stuttgart, Germany
Posts: 827
|
Dyno visit was successful! The stars aligned, dyno was operational (mostly) and the tuner (Mr Ted Jannetty) was online to tweak after each run.
Strapped down and prepped: We did 6 runs and 4 'flashes' of the ECU...gaining just shy of 50 CHP for a grand total of 700 crank horsepower. Dyno sheet between untuned WOT and yesterday's best run: Pleased with the output. The dyno was acting up with a cooling fan failure and anomalies appearing in the curves. Ted was confident the engine was not to blame and enough runs were made to ensure a smooth power curve. The torque number is inaccurate due to the spike. I have no idea what 966 NM is anyway...! I will say on the way home-4th gear it really pulls nicely to the 7000 rpm limiter (150 mph)... May be tested on the Nurburgring tomorrow (opening weekend for the season!).
__________________
|
03-17-2024, 07:40 AM | #65 |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,266
|
Quote:
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
|
Post Reply
|
|
|