![]() |
#1 |
![]() Drives: 2024 2SS vert w/M6 & Dual Mode. Red Join Date: May 2023
Location: NJ
Posts: 175
|
FLOORJACKS- What are you using ?
Doing some due diligence on 1/1/2 ton ,low profile, lightweight floorjacks.Of concern is the fact that sensibly affordable ones (under $200) all come from China and the few made in the USA are either 2 or 3 ton and $500 plus.
Would like to read about your experiences and recommendations. An additional purchase that interests me is the ZL-1 Addons aluminum safety piece that keeps the jack from accidentally lowering. |
![]() |
![]() |
![]() |
#2 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 23 ZL1 A10 Rapid Blue Join Date: Aug 2020
Location: MO
Posts: 2,023
|
I have a low pro racing jack that Im sure came from harbor freight and it's been perfect.
|
![]() |
![]() |
![]() |
#3 |
![]() Drives: 2024 Camaro 1SS M6 Join Date: Nov 2023
Location: Western NY
Posts: 171
|
Daytona Long reach low profile Jack, along with some Daytona Jack stands and the zl1 add ons lift pads. I also have the race ramps 67".
|
![]() |
![]() |
![]() |
#4 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,730
|
Low profile 3 ton Daytona jack from Harbor Freight. Works like a charm (and I have ZL1 style side skirts, the worst case scenario for floor jacks).
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
![]() |
![]() |
![]() |
#5 |
![]() Drives: 2023 SS 1LE Sharkskin Join Date: Jun 2023
Location: MAGA MT
Posts: 310
|
I use two 3.5 ton Arcan low profile jacks I bought at Costco about 15 years ago. Costco occasionally still carries them, at least in my local store. If I recall they are around $130.
|
![]() |
![]() |
![]() |
#6 | |
![]() Drives: 2021 SS 1LE Join Date: Mar 2023
Location: Planet Earth
Posts: 80
|
Quote:
Blue one? I've got an Arcan, probably 20+ years old - its a tank and just keeps going. |
|
![]() |
![]() |
![]() |
#7 |
![]() Drives: 2024 2SS vert w/M6 & Dual Mode. Red Join Date: May 2023
Location: NJ
Posts: 175
|
I'm with you on the need for a multi-tool approach. Race Ramps and a H.T. Daytona 1 1/2 Ton aluminum floor jack. I also have the ZL-1 lift pads. The money is substantial but I never go cheap when it comes to safety. If H.T. runs a sale, I might even go for two floor jacks. I can't make my mind up whether I want the 72" Race Ramps or the 67 ". It's all about money and the space this stuff takes up.
|
![]() |
![]() |
![]() |
#8 | |
![]() Drives: 2024 Camaro 1SS M6 Join Date: Nov 2023
Location: Western NY
Posts: 171
|
Quote:
My main concern was clearing the front of the car without scraping the ramps, and the 67" is perfect for me. I've got the 2 part ramps, which are very nice. IIRC another reason I opted for the 67" is that it gives a 10" height whereas I think the 72" were slightly lower (8" maybe)? Space is at a premium for bigger dudes like me when trying to work under the car ![]() |
|
![]() |
![]() |
![]() |
#9 |
![]() Drives: 2023 SS 1LE Sharkskin Join Date: Jun 2023
Location: MAGA MT
Posts: 310
|
|
![]() |
![]() |
![]() |
#10 |
That guy
|
Low profile Daytona jack. I keep a 3ton in the garage and a 1.5 in the trunk.
They get the job done. I recently retired one after almost 20 years of indoor/outdoor service.
__________________
James Montigny
2017 Camaro 2SS A8 - Krypton Green Magnuson 2650, TSP Head/Cam, DSX Low Side, Flex Fuel, LT4 HPFP, 103mm TB, Big Gulp. |
![]() |
![]() |
![]() |
#11 |
![]() Drives: 2018 Hyper Blue Metallic SS 1le Join Date: Oct 2023
Location: Oxford, Pa
Posts: 50
|
my China Freight low profile jack has been amazing! I bought it a few years ago when I had a lowered SRT Challenger
|
![]() |
![]() |
![]() |
#12 |
![]() Drives: 2024 Camaro 1SS M6 Join Date: Nov 2023
Location: Western NY
Posts: 171
|
FWIW, I just ordered one of these for my Daytona jack. Wondering if anyone else has used this product? I have other stuff from ZL1 and it has been great.
https://zl1addons.com/products/floor...de4a2ee7&_ss=r I never trust jacks if I'm under a vehicle, so as mentioned above, anything for safety/redundancy is worth it in my book. |
![]() |
![]() |
![]() |
#13 |
Instagram: Sangstah
|
Harbor Freight low profile jack is the best, mine has been solid for 5 plus years.
__________________
2019 SS 1LE - "CaSSandra" 2014 SS - "AleSSandra - Sold" 94 Z28 - Sold Follow the build https://www.camaro6.com/forums/showthread.php?t=612717 |
![]() |
![]() |
![]() |
#14 |
![]() Drives: 2024 2SS vert w/M6 & Dual Mode. Red Join Date: May 2023
Location: NJ
Posts: 175
|
I've narrowed it down to the Harbor Freight 1 1/2 Ton all aluminum Daytona low profile that costs $299. Pricey, but the reviews are great and it only weighs 36#. Crazy, but I might even get a second one cause ZL-1 Add Ons recommends using two. Now to find out if ZL-1 jack safety actually fits this model.
|
![]() |
![]() |
|
|
Post Reply
|
|
|