You are browsing camaro6 
02-16-2024, 06:20 AM
|
#1 |
 |
OEM Intake TQ specs
Are the tq specs and tq pattern the same on the OEM manifold as the MSD?
If not, what are the specs and pattern for install? |
|
|
|
02-16-2024, 09:06 AM
|
#2 |
           
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 7,665
|
Yes but, I don't go by torque specs, I just follow the pattern to torque them from middle outward by feel. Reason being you will have to tighten them 2-3 times after installing manifold. So just snug them down in the correct pattern. And then recheck after a few heat cycles, and then rinse repeat after 500 miles or so.
__________________
 2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel |
|
|
|
|
02-16-2024, 01:04 PM
|
#3 |
|
|
@kinglt1
Thanks Just need to get to to the dealer one last time :( |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
