[arpad_m]

Originally Posted by CalgaryZL1

Had the wheels off to trim rear shield for the BW duct and decided to white out the lettering, why not? It was right up my OCD alley. Just wanted to see the contrast, let’s see how long it will last.

Gotta love the old school

[sactownbwoy]

Had some custom seat belt pads made...

[DriftR]

Originally Posted by CalgaryZL1

Added the door striker covers that sklippi2018 was kind enough to supply part# for, nice little touch to cover that unattractive striker. It’s the little things that add up.

Link?

[2SS Capt]

Did a few things:

- Installed RST Stainless Steel Brake Lines in red
- Did a flush and fill of the brake system using Castrol SRF Brake Fluid
- Installed MSD Super Conductor Red Spark Plug Wires

[Junction65]

GM 13574802 Cover, Front/Rear Side Door Lock Striker

[DriftR]

Originally Posted by Junction65

GM 13574802 Cover, Front/Rear Side Door Lock Striker

Thank you, GM Parts Direct says it doesn't fit but I'm guessing that is not accurate since the cars don't come with it from the Factory.

[KC64]

These were just dropped off. Tomorrow morning put them on

[Anjilslaire]

Originally Posted by Junction65

GM 13574802 Cover, Front/Rear Side Door Lock Striker

Ouch. $13 shipping to WA state from GMPartsdirect for a $5 part.


Or Amazon for $17
https://www.amazon.com/GM-13574802-C...dp/B015NEF098/

[sklippi2018]

Originally Posted by DriftR

Thank you, GM Parts Direct says it doesn't fit but I'm guessing that is not accurate since the cars don't come with it from the Factory.

Fits like a glove! And, these are individually packed so update the quantity.

[sklippi2018]

And, on top of that, checked coolant thanks to earlier posts and find out I need to fill as well. However....stinkin' strut tower brace!

[Junction65]

Originally Posted by Anjilslaire

Ouch. $13 shipping to WA state from GMPartsdirect for a $5 part.


Or Amazon for $17
https://www.amazon.com/GM-13574802-C...dp/B015NEF098/

What if you want to get one for each door?

[2SS Capt]

Originally Posted by sklippi2018

And, on top of that, checked coolant thanks to earlier posts and find out I need to fill as well. However....stinkin' strut tower brace!

Yup, I have the same issue, filled mine up yesterday when I had the strut tower brace off to put on my new MSD Spark Plug Wires...

[clg82]

Originally Posted by 2SS Capt

Yup, I have the same issue, filled mine up yesterday when I had the strut tower brace off to put on my new MSD Spark Plug Wires...

Not to derail here, but I thought I read that strut tower braces are more "cosmetic look cool" for these platforms than actually functional?

[DriftR]

Originally Posted by clg82

Not to derail here, but I thought I read that strut tower braces are more "cosmetic look cool" for these platforms than actually functional?

Not to hijack but same question here... on my 4th gen TA I added an adjustable strut tower brace and could definitely notice a difference in front end rigidity and turn in. These new Camaro's are so stiff I'm not sure how much it could help? Other than topping off coolant it doesn't hurt though... and my 24 LTI lower reservoir is already low.