Homepage Garage Wiki Register Community Calendar Today's Posts Search
#Camaro6
Go Back   CAMARO6 > Specific Packages / Variants > 6th gen Camaro Convertible


AWE Tuning


Post Reply
 
Thread Tools
Old 01-07-2024, 09:12 AM   #1
gchu
 
Drives: Chevy Camaro
Join Date: Dec 2019
Location: PA
Posts: 87
Lift pads?

I've been looking for lift pads and it seems like the only ones available for the Convertibles are from ZL1 - which I am sure they are nice, but it's tough to spend $90 when the non-convertible ones are $35 on amazon

Any alternates/recomendations?
gchu is offline   Reply With Quote
Old 01-07-2024, 10:36 AM   #2
SomeGeoffGuy

 
SomeGeoffGuy's Avatar
 
Drives: 2023 2SS Convertible
Join Date: May 2009
Location: Metro Detroit
Posts: 1,107
I bought those and the arms on my 2-post offset lift won't go narrow enough to use them. Waa waaa.

-Geoff
__________________
'12 2SS RS Convertible - Traded in.
'16 2SS Convertible - White on white, mag-ride, NPP, nav. Sold!
'23 2SS Convertible -Same as above except orange.
SomeGeoffGuy is offline   Reply With Quote
Old 01-08-2024, 06:14 AM   #3
ember1205
Hot Camaro
 
ember1205's Avatar
 
Drives: '20 2SS Convertible 6MT
Join Date: May 2020
Location: CT
Posts: 3,541
I have these and they work just fine.

https://a.co/d/0YQW0Ap
ember1205 is offline   Reply With Quote
Old 01-08-2024, 06:23 AM   #4
NashZL1
 
Drives: 2022 Camaro ZL1
Join Date: Dec 2021
Location: Nashville, TN
Posts: 224
I have these:
https://www.ebay.com/itm/35494622978...Bk9SR6qpsZCdYw
__________________
Randy in Nashville
2022 Chevrolet Camaro ZL1 A10
2020 Ford Mustang Shelby GT500
2020 Genesis G90 Ultimate
2019 Mercedes-Benz SL450
2017 Corvette Grand Sport A8
2024 Honda Civic Touring
1971 Datsun 240Z
NashZL1 is offline   Reply With Quote
Old 01-08-2024, 06:37 AM   #5
ember1205
Hot Camaro
 
ember1205's Avatar
 
Drives: '20 2SS Convertible 6MT
Join Date: May 2020
Location: CT
Posts: 3,541
Quote:
Originally Posted by NashZL1 View Post
The listing says they are -not- for convertibles, though.
ember1205 is offline   Reply With Quote
Old 01-08-2024, 06:41 AM   #6
NashZL1
 
Drives: 2022 Camaro ZL1
Join Date: Dec 2021
Location: Nashville, TN
Posts: 224
Quote:
Originally Posted by ember1205 View Post
The listing says they are -not- for convertibles, though.
Sorry. Failure on my part to pay attention.
__________________
Randy in Nashville
2022 Chevrolet Camaro ZL1 A10
2020 Ford Mustang Shelby GT500
2020 Genesis G90 Ultimate
2019 Mercedes-Benz SL450
2017 Corvette Grand Sport A8
2024 Honda Civic Touring
1971 Datsun 240Z
NashZL1 is offline   Reply With Quote
Old 01-08-2024, 07:53 AM   #7
gchu
 
Drives: Chevy Camaro
Join Date: Dec 2019
Location: PA
Posts: 87
Quote:
Originally Posted by ember1205 View Post
I have these and they work just fine.

https://a.co/d/0YQW0Ap
Thanks!

I was hoping to find a set that stayed with the car but that looks like a good Plan B option!

Appreciate your recommendation - it's cheap enough that I may buy it in case I need to lift my Honda
gchu is offline   Reply With Quote
Old 01-08-2024, 12:49 PM   #8
split_bumper
 
Drives: 24 ZL1, 6.2L Denali, 73 SplitBumper
Join Date: Jun 2023
Location: Minnesota
Posts: 219
Quote:
Originally Posted by gchu View Post
Thanks!

I was hoping to find a set that stayed with the car but that looks like a good Plan B option!

Appreciate your recommendation - it's cheap enough that I may buy it in case I need to lift my Honda

I believe the convertible ones are just clearanced more. If you have access to a grinder or better yet a bridgeport or manual milling machine, you could make these ones work. (The ones for 39.99)
__________________
2024 ZL1 Radiant Red / Coupe / M6 / PDR / BCD / Carbon Scoop, Dash, Shifter / Red Seat Belts / Black Lugs

https://cws.gm.com/vs-cws/vehshop/v2...FJ1R60R0111531
split_bumper is offline   Reply With Quote
Old 01-23-2024, 10:21 AM   #9
Gunkk
Thank you Al Oppenheiser!
 
Gunkk's Avatar
 
Drives: Red Hot A10 ZL1 Convertible
Join Date: Jun 2017
Location: Sarasota, FL
Posts: 5,044
Quote:
Originally Posted by split_bumper View Post
I believe the convertible ones are just clearanced more. If you have access to a grinder or better yet a bridgeport or manual milling machine, you could make these ones work. (The ones for 39.99)
Correct. The rockers on the vert are thicker than the coupe for improved rigidity, reducing the depth of the pinch weld seam. Once side of the lift point must be milled to allow clearance, or it won't fit.
Gunkk is offline   Reply With Quote
Old 01-24-2024, 01:00 PM   #10
split_bumper
 
Drives: 24 ZL1, 6.2L Denali, 73 SplitBumper
Join Date: Jun 2023
Location: Minnesota
Posts: 219
Quote:
Originally Posted by Gunkk View Post
Correct. The rockers on the vert are thicker than the coupe for improved rigidity, reducing the depth of the pinch weld seam. Once side of the lift point must be milled to allow clearance, or it won't fit.

I basically did it anyways on my lift pads just to have them fit better. Similar process for the conv. I bet, just might be different amount.
https://www.camaro6.com/forums/showp...9&postcount=10
__________________
2024 ZL1 Radiant Red / Coupe / M6 / PDR / BCD / Carbon Scoop, Dash, Shifter / Red Seat Belts / Black Lugs

https://cws.gm.com/vs-cws/vehshop/v2...FJ1R60R0111531
split_bumper is offline   Reply With Quote
 
Post Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:28 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.