ZL1 Badging Removal on Carbon Hood - Page 2

45LongColt · 12-08-2023, 09:02 PM

Thanks guys. Going to under take it this weekend. Ill post a couple pics. Thanks again.

45LongColt · 12-09-2023, 04:34 PM

I used 6lb fishing line, didn't bother to heat them and the badges came off in seconds. I then decided to use a Wonder Wheel. The adhesive came off like dust… very easy. Little WD40 took off any remaining sticky residue. Windex’ed real good and applied the replacement. Rear is complete. Too dark now, so waiting until tomorrow to put on the hood insert emblems.

NYTMARE23 · 12-09-2023, 05:03 PM

Quote:

Originally Posted by 45LongColt

I used 6lb fishing line, didn't bother to heat them and the badges came off in seconds. I then decided to use a Wonder Wheel. The adhesive came off like dust… very easy. Little WD40 took off any remaining sticky residue. Windex’ed real good and applied the replacement. Rear is complete. Too dark now, so waiting until tomorrow to put on the hood insert emblems.

Looking good! Excited to see the hood when you're done

45LongColt · 12-09-2023, 08:03 PM

Done. Did it the garage. No issues. I like this matt black way better than that chrome.

NYTMARE23 · 12-09-2023, 08:33 PM

Quote:

Originally Posted by 45LongColt

Done. Did it the garage. No issues. I like this matt black way better than that chrome.

Looks great! They all came out good! I've never been a big chrome person either. I get rid of it as much as I can on every vehicle I have.

CalgaryZL1 · 12-09-2023, 08:48 PM

Nice!

Booher · 12-10-2023, 07:58 AM

Does anyone have a link for this guy that isn't on Instagram/snap chat? I don't like that social media but seems to be harder and harder to get away from using it.

IndyZrider · 12-10-2023, 10:18 AM

Quote:

Originally Posted by Booher

Does anyone have a link for this guy that isn't on Instagram/snap chat? I don't like that social media but seems to be harder and harder to get away from using it.

Here's his site....message him thru it.....

https://www.0fx2gv.com

45LongColt · 12-11-2023, 07:00 AM

An under hood Brian Tooley Racing placard he created for me by stippling the logo into the gloss finish.

ZPirate · 12-11-2023, 08:40 AM

Quote:

Originally Posted by 45LongColt

Done. Did it the garage. No issues. I like this matt black way better than that chrome.

Looks really good. Nice job.

I wonder how those would look on the standard Mosaic black hood bulge. I'd be afraid that they would blend in too much.

I replaced the chrome emblem on the back of my car right after I got it with a gloss black one.

Name: 20231015_121753.jpg
Views: 143
Size: 100.1 KB

Name: 20231015_121753.jpg
Views: 143
Size: 100.1 KB

NYTMARE23 · 12-11-2023, 08:55 AM

Quote:

Originally Posted by ZPirate

Looks really good. Nice job.

I wonder how those would look on the standard Mosaic black hood bulge. I'd be afraid that they would blend in too much.

I replaced the chrome emblem on the back of my car right after I got it with a gloss black one.

Attachment 1142608

I think if you did Matte that it would maybe blend in a little bit, but I do feel the Matte would "stick out" more than if you did gloss letters/numbers. I feel the gloss may blend in more??? Just my .02

P.S. I DO like the gloss on the rear though!!

Booher · 12-11-2023, 09:39 AM

Tyvm!

12-08-2023, 09:02 PM	#15
45LongColt Drives: 2018 Zl1 Camaro Join Date: Feb 2018 Location: Gainesville, VA Posts: 149	Thanks guys. Going to under take it this weekend. Ill post a couple pics. Thanks again. __________________ Big Gulp\|NW103\|SW Headers\|UHO CATS\|XPipe\|Borla Atak\|MM CC\|Kong Ported\|NSX\|ATI Damper\|DSX 9.45 Lower\|ZPE 2.5 Upper\|DM Tensioner\|FW Green Belt/BTR Gen V LT4 Cam w/32% lobe/BTR VVT Lockout/Pratt & Miller Chain/BTR Pushrods,Valve Springs, Retainers, Hydraulic Lifters & Guide Plate, Trunnion Roller\|Katech Valley\|KaTech Valve Covers\|MSD Coils\|DSX E Sensor & Aux Pump\|ICT Water Pump\|Katech Oil Pump\|Cordes & Mishimoto Expansion Tanks\|P3 Gauge\|LC-2 Wideband Sensor\|KaTech Wires\|DynoJet Tuned

12-09-2023, 04:34 PM	#16
45LongColt Drives: 2018 Zl1 Camaro Join Date: Feb 2018 Location: Gainesville, VA Posts: 149	I used 6lb fishing line, didn't bother to heat them and the badges came off in seconds. I then decided to use a Wonder Wheel. The adhesive came off like dust… very easy. Little WD40 took off any remaining sticky residue. Windex’ed real good and applied the replacement. Rear is complete. Too dark now, so waiting until tomorrow to put on the hood insert emblems. Attached Images __________________ Big Gulp\|NW103\|SW Headers\|UHO CATS\|XPipe\|Borla Atak\|MM CC\|Kong Ported\|NSX\|ATI Damper\|DSX 9.45 Lower\|ZPE 2.5 Upper\|DM Tensioner\|FW Green Belt/BTR Gen V LT4 Cam w/32% lobe/BTR VVT Lockout/Pratt & Miller Chain/BTR Pushrods,Valve Springs, Retainers, Hydraulic Lifters & Guide Plate, Trunnion Roller\|Katech Valley\|KaTech Valve Covers\|MSD Coils\|DSX E Sensor & Aux Pump\|ICT Water Pump\|Katech Oil Pump\|Cordes & Mishimoto Expansion Tanks\|P3 Gauge\|LC-2 Wideband Sensor\|KaTech Wires\|DynoJet Tuned

12-09-2023, 08:03 PM	#18
45LongColt Drives: 2018 Zl1 Camaro Join Date: Feb 2018 Location: Gainesville, VA Posts: 149	Done. Did it the garage. No issues. I like this matt black way better than that chrome. Attached Images __________________ Big Gulp\|NW103\|SW Headers\|UHO CATS\|XPipe\|Borla Atak\|MM CC\|Kong Ported\|NSX\|ATI Damper\|DSX 9.45 Lower\|ZPE 2.5 Upper\|DM Tensioner\|FW Green Belt/BTR Gen V LT4 Cam w/32% lobe/BTR VVT Lockout/Pratt & Miller Chain/BTR Pushrods,Valve Springs, Retainers, Hydraulic Lifters & Guide Plate, Trunnion Roller\|Katech Valley\|KaTech Valve Covers\|MSD Coils\|DSX E Sensor & Aux Pump\|ICT Water Pump\|Katech Oil Pump\|Cordes & Mishimoto Expansion Tanks\|P3 Gauge\|LC-2 Wideband Sensor\|KaTech Wires\|DynoJet Tuned

12-11-2023, 07:00 AM	#23
45LongColt Drives: 2018 Zl1 Camaro Join Date: Feb 2018 Location: Gainesville, VA Posts: 149	An under hood Brian Tooley Racing placard he created for me by stippling the logo into the gloss finish. Attached Images __________________ Big Gulp\|NW103\|SW Headers\|UHO CATS\|XPipe\|Borla Atak\|MM CC\|Kong Ported\|NSX\|ATI Damper\|DSX 9.45 Lower\|ZPE 2.5 Upper\|DM Tensioner\|FW Green Belt/BTR Gen V LT4 Cam w/32% lobe/BTR VVT Lockout/Pratt & Miller Chain/BTR Pushrods,Valve Springs, Retainers, Hydraulic Lifters & Guide Plate, Trunnion Roller\|Katech Valley\|KaTech Valve Covers\|MSD Coils\|DSX E Sensor & Aux Pump\|ICT Water Pump\|Katech Oil Pump\|Cordes & Mishimoto Expansion Tanks\|P3 Gauge\|LC-2 Wideband Sensor\|KaTech Wires\|DynoJet Tuned

12-09-2023, 08:48 PM	#20
CalgaryZL1 Drives: 2020 Chevy Camaro ZL1 Join Date: Apr 2023 Location: Calgary Canada Posts: 1,653	Nice!

12-10-2023, 07:58 AM	#21
Booher Drives: 2019 zl1 6 speed Join Date: Jul 2017 Location: Lake Havasu Arizona Posts: 1,135	Does anyone have a link for this guy that isn't on Instagram/snap chat? I don't like that social media but seems to be harder and harder to get away from using it.

12-11-2023, 09:39 AM	#26
Booher Drives: 2019 zl1 6 speed Join Date: Jul 2017 Location: Lake Havasu Arizona Posts: 1,135	Tyvm!

User Name		Remember Me?
Password