[Cp Rooks]

Does anyone know which wire goes from the push to start button, to the starter relay under the hood fuse box, in the harness under the steering wheel? I'm trying to install a killswitch

[arpad_m]

Here's the relevant schematic for you from the service manual, but note that this is a modern car, the start button isn't wired directly to anything, it's a pulse/hold signal source to the BCM. You can tap other wires, though, say, one of those that feed the starter motor.

Color coding is as follows:

BK  Black
BN  Brown
BU  Blue
GN  Green
GY  Gray
PK  Pink
RD  Red
VT  Violet
YE  Yellow
WH  White

[CalgaryZL1]

Originally Posted by arpad_m

Here's the relevant schematic for you from the service manual, but note that this is a modern car, the start button isn't wired directly to anything, it's a pulse/hold signal source to the BCM. You can tap other wires, though, say, one of those that feed the starter motor.

Color coding is as follows:

BK  Black
BN  Brown
BU  Blue
GN  Green
GY  Gray
PK  Pink
RD  Red
VT  Violet
YE  Yellow
WH  White

Thanks! This is perfect

[Cp Rooks]

Thanks. Going to have to change plans then, I thought maybe it would be directly connected. My coworker thinks there should be a bolted wire on the starter I can use so I don't have to cut any wires