What did you do to your 6th Gen Camaro today?! - Page 1021

sklippi2018 · 11-05-2023, 07:11 AM

Added ZL1 rock guards.

Pretty sharp lookin' if I do say so myself.

CalgaryZL1 · 11-05-2023, 07:24 AM

Quote:

Originally Posted by Annihilate

Dealer put on the front splitter, side gfx, and fuel door. Accepting the vehicle on Monday!

Were they able to get your rear spoiler to line up a little better?

Annihilate · 11-05-2023, 02:38 PM

Quote:

Originally Posted by CalgaryZL1

Were they able to get your rear spoiler to line up a little better?

They didn't have time to look into on Saturday, they said they're checking it out tomorrow before I accept the vehicle.

Do you guys think I should have added on the rear diffuser? I was torn and it was hard to find pictures of how it looked in genuine application.

I've got the diffuser in my garage at home so I could theoretically put it on at any time at least.

beaurrr · 11-05-2023, 02:58 PM

Quote:

Originally Posted by ZPirate

Yep. Best all weather mats out there.

These ARE good. I had a set in my C7. I liked the texture and the way they stuck to the carpet. Way better than Weathertechs and the like.

Bumbleboy92 · 11-05-2023, 03:53 PM

Quote:

Originally Posted by Annihilate

They didn't have time to look into on Saturday, they said they're checking it out tomorrow before I accept the vehicle.

Do you guys think I should have added on the rear diffuser? I was torn and it was hard to find pictures of how it looked in genuine application.

I've got the diffuser in my garage at home so I could theoretically put it on at any time at least.

Word of warning, I had the dealer realign my spoiler end piece. Ended up without the car for 3 weeks due to them having to order the end piece, doing some paint work to ensure a proper match for the paint that was covered, and then forgetting to order the double sided tape for the end piece

ZPirate · 11-05-2023, 05:01 PM

I installed gloss red hash marks with gloss black edges on my ZL1 today.

Name: 20231105_161932.jpg
Views: 458
Size: 341.2 KB

Name: 20231105_161745.jpg
Views: 463
Size: 394.9 KB

CalgaryZL1 · 11-05-2023, 05:28 PM

Quote:

Originally Posted by ZPirate

I installed gloss red hash marks with gloss black edges on my ZL1 today.

Attachment 1140041

Attachment 1140042

I love your black and white theme, but I am on the fence with the red hash marks only because I’m not a big fan of red.

beaurrr · 11-05-2023, 05:33 PM

Quote:

Originally Posted by ZPirate

I installed gloss red hash marks with gloss black edges on my ZL1 today.

Attachment 1140041

Attachment 1140042

I think it looks terrific.

DevilsReject97 · 11-05-2023, 06:18 PM

Quote:

Originally Posted by CalgaryZL1

I love your black and white theme, but I am on the fence with the red hash marks only because I’m not a big fan of red.

Same here as well. I think it would have looked better if the car had additional red accents, such as a red trim on the wheel, red calipers, etc...

ZPirate · 11-05-2023, 06:55 PM

Quote:

Originally Posted by CalgaryZL1

I love your black and white theme, but I am on the fence with the red hash marks only because I’m not a big fan of red.

I also considered gloss black hash marks with gloss red pinstripes. I think that combination would also look good. Since the hash marks are vinyl they can easily be removed. Who knows, I might try the gloss bock with red pinstripes one day.

Quote:

Originally Posted by beaurrr

I think it looks terrific.

Thanks! I like it too.

Quote:

Originally Posted by DevilsReject97

Same here as well. I think it would have looked better if the car had additional red accents, such as a red trim on the wheel, red calipers, etc...

I think red looks really good with Summit White. That's primarily why I chose red over black for the hash marks.

B8TTYVILLEKID · 11-05-2023, 08:13 PM

Quote:

Originally Posted by Bumbleboy92

Installed ZL1Addons rock guards, hopefully cut out the chips now

Also got the front bumper done with PPF

WHAT !!! CANT EVEN GET THE CAMARO IN THE GARAGE !

clg82 · 11-05-2023, 09:41 PM

Installed the new front brake ducting can’t believe the difference in size between what comes on the Cadillac and the ZL1.

R_Mac_1 · 11-05-2023, 10:57 PM

Got the car up in the air on the weekend and did some work. Changed engine and differential oil, then worked on exhaust. Installed Stainless Works Redline cat-back with the black chrome tips.

It was the first time using my Race Ramps 12" wheel cribs. Getting the car lifted up that high was a bit unnerving but once it was on the cribs it was great. Lots of space underneath (even for a fat guy) and I didn't worry about safety under there like I would have with jack stands.

MagnumMaro · 11-08-2023, 09:11 AM

Just some $20 light strips from AMZN. Plan to hardwire in the future when I add 6x9's & a sub.

11-05-2023, 07:11 AM	#14281
sklippi2018 Drives: 2021 ZL1 A10 Join Date: Apr 2019 Location: Virginia Posts: 415	Added ZL1 rock guards. Pretty sharp lookin' if I do say so myself. Last edited by sklippi2018; 11-05-2023 at 07:12 AM. Reason: Incomplete

11-05-2023, 05:01 PM	#14286
ZPirate Drives: 2023 Summit White Camaro ZL1 M6 Join Date: Dec 2021 Location: North Carolina Posts: 1,910	I installed gloss red hash marks with gloss black edges on my ZL1 today. __________________ 2023 Summit White ZL1 M6 (delivered 10/15/23) 2023 Dodge Durango SRT (daily driver) 2003 Nissan 350Z (modified) 2022 Rapid Blue 1SS 1LE M6 (delivered 2/19/22) (Sold) 2009 BMW 135i (Sold)

11-05-2023, 09:41 PM	#14292
clg82 Banned Drives: 2020 Camaro ZL1 Join Date: Oct 2020 Location: Texas Posts: 1,724	Installed the new front brake ducting can’t believe the difference in size between what comes on the Cadillac and the ZL1. Last edited by clg82; 11-08-2023 at 09:57 PM.

11-08-2023, 09:11 AM	#14294
MagnumMaro Drives: 2023 Chevy Camaro Join Date: Aug 2023 Location: SoCal Posts: 42	Snazzy footwell lights. Just some $20 light strips from AMZN. Plan to hardwire in the future when I add 6x9's & a sub. Attached Images

11-05-2023, 10:57 PM	#14293
R_Mac_1 Drives: 2017 Camaro 2SS 50th Anniversary Join Date: Jan 2023 Location: IA Posts: 18 View My Garage	Got the car up in the air on the weekend and did some work. Changed engine and differential oil, then worked on exhaust. Installed Stainless Works Redline cat-back with the black chrome tips. It was the first time using my Race Ramps 12" wheel cribs. Getting the car lifted up that high was a bit unnerving but once it was on the cribs it was great. Lots of space underneath (even for a fat guy) and I didn't worry about safety under there like I would have with jack stands.

User Name		Remember Me?
Password