Indoor Car Cover Recommendation

Tommy23 · 09-29-2023, 11:57 PM

Hi fellow Camaro 6 gen enthusiasts -

I just took possession of a 2024 Camaro 2SS convertible. I'm going keep it covered in my garage, but would like to get the experts' opinions on the best indoor car cover to keep the car in great condition. Lots of different covers out there. Many thanks in advance. Tommy23

LeonardS · 09-30-2023, 06:30 AM

CoverCraft 5 layer indoor cover for my ZLE. Prior to this cover, I’ve always bought 5 layer outdoor covers even though they were only used indoors. This one is supposed to be better for dust control. All of the covers I’ve bought work well.

BLACK3R · 09-30-2023, 09:12 AM

After shopping around many brands and sites, l picked up the CoverCraft 5 layer mentioned above from the CoverCraft store on Amazon for $244 shipped. Have yet to receive, but seems like best cover at that price point.

NYTMARE23 · 09-30-2023, 09:29 AM

Got mine off of www.shopchevyparts.com. Used it the first time last winter and it was great! SUPER soft and high quality! Would definitely buy one again if needed.(sorry for the sideways pic!)

arpad_m · 09-30-2023, 11:56 AM

Mine is the OEM GM indoor cover, part number 23457478, see here: https://www.ebay.com/itm/262602652246. Very high quality, soft on the inside, patterned with the Gen 6 shield emblem, comes in a nice carrying bag with a large emblem on the side. Fits every Camaro trim (except maybe the ZL1 1LE with the big waaang, I'm not sure it would not stretch all the way to the bottom of the rear bumper on that trim), although it is made primarily for the coupe with a sharkfin roof antenna pocket that a vert doesn't need.

In all honesty, I haven't used it in the past two years, if you want mine, DM me, it's in perfect condition and we can figure out a much better price than new.

dpevans · 09-30-2023, 12:51 PM

Indoor I would get the softest cover you can find, I have a Cal Cover plush weave soft cotton cover. Not sure if you have experience with car covers but I have learned no matter how careful you are taking covers on and off will scratch and cause swirl marks. I only use my cover when the car is going to sit for more than a week and only use after the car has been washed and dried.

SwL_Wildcat · 09-30-2023, 12:56 PM

Quote:

Originally Posted by arpad_m

Mine is the OEM GM indoor cover, part number 23457478, see here: https://www.ebay.com/itm/262602652246. Very high quality, soft on the inside, patterned with the Gen 6 shield emblem, comes in a nice carrying bag with a large emblem on the side. Fits every Camaro trim (except maybe the ZL1 1LE with the big waaang, I'm not sure it would not stretch all the way to the bottom of the rear bumper on that trim), although it is made primarily for the coupe with a sharkfin roof antenna pocket that a vert doesn't need.

In all honesty, I haven't used it in the past two years, if you want mine, DM me, it's in perfect condition and we can figure out a much better price than new.

Is that going to be the same one that comes with the car if you order it with the car? I'm wondering about how it will fit with the wing...

CalgaryZL1 · 09-30-2023, 01:08 PM

Quote:

Originally Posted by SwL_Wildcat

Is that going to be the same one that comes with the car if you order it with the car? I'm wondering about how it will fit with the wing...

My car came with the dealer ordered car cover in red with out ZL1 logo and it fits perfectly with my factory ZLE wing

Edit: damn it looks like they charge $100 more now for the ZL1 logo

SwL_Wildcat · 09-30-2023, 01:10 PM

Quote:

Originally Posted by CalgaryZL1

My car came with the dealer ordered car cover in red with out ZL1 logo and it fits perfectly with my factory ZLE wing

Awesome. Thank you. I'm sure GM wouldn't send a cover that didn't fit...

arpad_m · 09-30-2023, 02:31 PM

Quote:

Originally Posted by SwL_Wildcat

Is that going to be the same one that comes with the car if you order it with the car? I'm wondering about how it will fit with the wing...

Nah, mine is also an orderable option, but it has the 6th gen Camaro shield logo, not the ZL1 one. I guess you may not want to risk it with the big wing and just get the ZL1 specific one (unless you live relatively close to me and are willing to drive by to give it a try).

90503 · 09-30-2023, 02:45 PM

This might be worth a look to shop and compare...Good luck.

https://www.calcarcover.com/

ember1205 · 10-02-2023, 10:25 AM

Quote:

Originally Posted by 90503

This might be worth a look to shop and compare...Good luck.

https://www.calcarcover.com/

I have the Dustop cover and I like it. It has been retired and I believe replaced with the DustForce cover. They are both soft and tightly woven to keep dust off of the car. I've left mine covered in a storage unit for 5-6 months and found nothing on the paint when I removed it (Summit White).

Sales@Phastek · 10-02-2023, 12:58 PM

Holda offers a breathable indoor cover that will avoid gathering moisture which allows your paint to fume naturally for 6th gen Coupe Camaros. It comes with the Camaro logo in the front, and transport bag to store the cover when not in use.

-Trae

jamala00 · 10-02-2023, 01:40 PM

With the racing stripes, my car even looks fast while stored for winter.

This one has worked great for me.

09-29-2023, 11:57 PM	#1
Tommy23 Drives: 2023 Join Date: Jan 2023 Location: VA Posts: 10	Indoor Car Cover Recommendation Hi fellow Camaro 6 gen enthusiasts - I just took possession of a 2024 Camaro 2SS convertible. I'm going keep it covered in my garage, but would like to get the experts' opinions on the best indoor car cover to keep the car in great condition. Lots of different covers out there. Many thanks in advance. Tommy23

09-30-2023, 06:30 AM	#2
LeonardS Drives: 1969 Z28,1992 Z28,1994 Z28,1999 SS Join Date: Oct 2021 Location: Jamestown, ND Posts: 1,154	CoverCraft 5 layer indoor cover for my ZLE. Prior to this cover, I’ve always bought 5 layer outdoor covers even though they were only used indoors. This one is supposed to be better for dust control. All of the covers I’ve bought work well. Attached Images __________________ 24 2SS 1LE, Riptide Blue, A10, PDR. Picked up 11/5/23, 560 miles. 23 ZLE Rapid Blue, M6. 6/27/22 TPW. Off assembly line on July 12th, 2022. To Dealer August 6th. Delivered August 8th. 129 miles. 99 SS Vert, Hugger Orange, A4, 806 miles 94 Z28, Black, M6, 595 miles 92 Z28, last car built at Van Nuys Plant, Red, A4, 125 miles www.last1992camaro.com 69 Z28, Dusk Blue, M4 29 Ford Business Coupe 28 Ford Pickup 24 GMC Denali 2500HD CCSB 4x4 22 Jeep Grand Cherokee 13 Ford F150 Crew Cab 4x4

09-30-2023, 09:29 AM	#4
NYTMARE23 NYTMARE23 Drives: Black 2023 ZL1 A10 Join Date: Oct 2022 Location: Nebraska Posts: 613	Got mine off of www.shopchevyparts.com. Used it the first time last winter and it was great! SUPER soft and high quality! Would definitely buy one again if needed.(sorry for the sideways pic!) Attached Images __________________ 2023 A10 ZL1 "NYTMARE" ‐‐--------------------------------------------------------

09-30-2023, 11:56 AM	#5
arpad_m Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017 Location: East Tennessee Posts: 13,150 View My Garage	Mine is the OEM GM indoor cover, part number 23457478, see here: https://www.ebay.com/itm/262602652246. Very high quality, soft on the inside, patterned with the Gen 6 shield emblem, comes in a nice carrying bag with a large emblem on the side. Fits every Camaro trim (except maybe the ZL1 1LE with the big waaang, I'm not sure it would not stretch all the way to the bottom of the rear bumper on that trim), although it is made primarily for the coupe with a sharkfin roof antenna pocket that a vert doesn't need. In all honesty, I haven't used it in the past two years, if you want mine, DM me, it's in perfect condition and we can figure out a much better price than new. __________________ 2018 Camaro 2SS — G7E MX0 NPP F55 IO6 735 rwhp \| 665 rwtq Magnuson TVS 2300 80mm pulley \| Kooks 1 7/8" LT headers \| JRE smooth idle terminator cam \| LT4 FS & injectors \| TSP forged pistons & rods JMS PowerMAX \| DSX flex fuel kit \| Roto-Fab CAI \| Soler 95mm LT5 TB \| 1LE wheels \| 1LE brakes \| BMR rear cradle lockout \| JRE custom tune 1100 - 1/30/18 \| 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 \| 3800 - 2/26/18 4300 - 2/27/18 \| 4B00 - 3/01/18 4200 - 3/05/18 \| 4800 - 3/14/18 5000 - 3/16/18 \| 6000 - 3/19/18

10-02-2023, 12:58 PM	#13
Sales@Phastek Drives: 2016 1SS, 2010 Camaro SS Join Date: Apr 2012 Location: Houston, TX Posts: 3,883	Holda offers a breathable indoor cover that will avoid gathering moisture which allows your paint to fume naturally for 6th gen Coupe Camaros. It comes with the Camaro logo in the front, and transport bag to store the cover when not in use. -Trae __________________

09-30-2023, 09:12 AM	#3
BLACK3R Drives: 2023 2SS 1LE Join Date: Jul 2023 Location: Florida Posts: 28	After shopping around many brands and sites, l picked up the CoverCraft 5 layer mentioned above from the CoverCraft store on Amazon for $244 shipped. Have yet to receive, but seems like best cover at that price point.

09-30-2023, 12:51 PM	#6
dpevans Drives: 2024 Riverside Blue 2SS 1LE Join Date: Mar 2016 Location: Fort Wayne, IN Posts: 1,357	Indoor I would get the softest cover you can find, I have a Cal Cover plush weave soft cotton cover. Not sure if you have experience with car covers but I have learned no matter how careful you are taking covers on and off will scratch and cause swirl marks. I only use my cover when the car is going to sit for more than a week and only use after the car has been washed and dried.

09-30-2023, 02:45 PM	#11
90503 Drives: 2011 2SS/RS LS3 Join Date: Nov 2011 Location: Torrance Posts: 14,564	This might be worth a look to shop and compare...Good luck. https://www.calcarcover.com/

10-02-2023, 01:40 PM	#14
jamala00 Drives: 2016 Camaro 2SS Hyper Blue Metallic Join Date: May 2020 Location: WI Posts: 2,623	With the racing stripes, my car even looks fast while stored for winter. This one has worked great for me.

User Name		Remember Me?
Password