[ZPirate]

Originally Posted by demonspeed

You provided a list of negative reasons for having it - unless, which you noted, one takes it to the track. I was simply responding that I didn’t order the car to take to car shows; I will be tracking, which is why I’m interested in it, but also being able to remove for different track events as necessary or any particular street driving. Basically, having the ability to cleanly remove and reinstall was my concern.

I gotcha. I just wasn't understanding what you meant in your prior post. If you like the wickerbill then that’s all that matters on your car. Just not my cup of tea.

[Wyzz Kydd]

At 155 mph plus the rear end feels very planted with more than adequate traction. I suspect the wicker bill adds little to nothing in that regard. It’s likely a net negative with respect to performance.

[cdb95z28]

Originally Posted by Wyzz Kydd

At 155 mph plus the rear end feels very planted with more than adequate traction. I suspect the wicker bill adds little to nothing in that regard. It’s likely a net negative with respect to performance.

"adequate" as in straight line traction?

[Wyzz Kydd]

Adequate as in I don’t get that floaty feeling I’ve experienced at high speeds in other cars, straight line or curves. Having said that, there may be situations where a wicker bill helps, but I suspect it’s not very often.

[cdb95z28]

Do you track you 1LE?

[Wyzz Kydd]

Competitively? No. Have I put it, and quite a few other high performance cars, on a track to stretch their legs, yes. I spend my time and money on competitive shooting.

I’m no expert, just a guy with 45 years of driving, and a half dozen or so high performance cars under my belt. If you think it helps have at it, have fun, be safe.

[demonspeed]

Their use can depend on a lot of different variables. I’ve seen them work on multiple platforms in a variety of circumstances. That’s not to say there isn’t a trade off that may come from their use. There is a reason why the Z/28 had one, just as there’s a reason why the ZLE comes with a monster wing.

Ultimately, I was asking because I want the ability to easily R&R. I think they look both cool and cheesy at the same time. I’m also the type of person who would run a plywood splitter on track without worry, so take everything I have to say in whatever way you’d like…

[Wyzz Kydd]

I hope it helps! They’re not expensive and easy to install so you don’t have a lot to lose.

[arpad_m]

Originally Posted by Wyzz Kydd

Competitively? No. Have I put it, and quite a few other high performance cars, on a track to stretch their legs, yes. I spend my time and money on competitive shooting.

I’m no expert, just a guy with 45 years of driving, and a half dozen or so high performance cars under my belt. If you think it helps have at it, have fun, be safe.

Wyzz Kydd, congrats on your 1000th post , thank you very much for your insights

[Wyzz Kydd]

Originally Posted by arpad_m

Wyzz Kydd, congrats on your 1000th post , thank you very much for your insights

Thank you!

[Winter’SS]

Originally Posted by cdb95z28

I believe it is. The 1LE that showed up at my dealership in August had the wicker and it had button head allen bolts. I have the install instructions at home. I did end up ordering the wicker two days ago.

Attachment 1113522

Do you know the part number? I think I want to order and install. Also, we have the same car, color and options! Except mine is a 2021. Love the look of the wickerbill

[Ryanbabz71]

Originally Posted by Winter’SS

Do you know the part number? I think I want to order and install. Also, we have the same car, color and options! Except mine is a 2021. Love the look of the wickerbill

When I ordered mine it was 84314076





Sent from my iPhone using Tapatalk Pro

[23VIVIDORANGE1LE]

My dealership installed mine, as I ordered the car with it, and broke one of the end fasteners. I brought it back to them and they have ordered a new wicker bill but the fasteners are mia with no eta from the manufacturer. I'm not very happy with my dealership, Maher Chevrolet in St Petersburg, FL. I mean how hard is it to put some nutserts in the spoiler and bolt the spoiler on. I'm still waiting for the fasteners...... it's been 2 months now. The dealership is going to owe me $450 plus a new center spoiler because mine now has holes drilled in it....

[Iconic]

$337 as I post today. Not sure what the shipping would run.

https://www.shopchevyparts.com/spoil...-92294682.html