|
|
#29 | |
![]() Drives: 2023 Camaro 1SS 1LE Join Date: Feb 2022
Location: Cold land
Posts: 34
|
Quote:
There a few easter eggs coming out too, thedrive just posted that the interior titanium bits (paddle shifts, dial shifter, serial plate) are from a retired F22. Pointless? Yes. Super cool? Hell yes! |
|
|
|
|
|
|
#30 |
![]() Drives: '16 Z06 7 Spd, 2024 High Country HD Join Date: May 2015
Location: Kansas City area
Posts: 441
|
Does it qualifies as mid-engine because the engine is mounted mid way between the front 2 fenders?
I watched the video at the end of the link provided by Farmer Fran. At about the 4:30 mark they show the airflow over the car using smoke. Is it just me or does the air flow look pretty disruptive and not smooth as one would expect for a car like this.? |
|
|
|
|
|
#31 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2023 ZL1 Vert M6 "Sharky" Join Date: Mar 2020
Location: Earth
Posts: 4,561
|
It was my understanding, generically,
Front engine is up at front axle Rear engine is behind rear axle Mid engine is over/ in front of rear axle
__________________
<Insert Cars You Own Here>
|
|
|
|
|
|
#32 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2023 ZL1 Vert M6 "Sharky" Join Date: Mar 2020
Location: Earth
Posts: 4,561
|
All moot soon though, as we will be saying 1 motor, 2 motors, 3 motors or 4 motors
__________________
<Insert Cars You Own Here>
|
|
|
|
|
|
#33 | |
|
Iron fist, lead foot
Drives: 2003 Mustang Cobra Join Date: Jul 2013
Location: Wyoming
Posts: 1,243
|
Quote:
There is: (FR) Front-engine Rear Drive (FF) Front-engine Front Drive (FMF/MF) Front-mid-engine Front Drive or Mid-engine Front Drive (FMR) Front-mid-engine Rear Drive (FMF) Front-mid-engine Front Drive (RMR) Rear-mid-engine Rear Drive Now for the mid-engine designations, there is a bit of gray area. Some guidelines state that the engine must be fully between the axles, in front OR behind the passenger compartment, while others state that the center mass of the engine being in between the axles also qualifies.
__________________
'03 SVT Cobra-SC4.6L V8 || modded with mods'n'stuff
|
|
|
|
|
|
|
#34 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: ABM #93 Join Date: Oct 2018
Location: Lotaburger
Posts: 3,188
|
Yea all that mumbo jumbo is cool but regardless of what who ever says, my eyes don’t deceive me… that is a front engine rear transaxle car just like the last handful of pre C8 Vette generations… that is not a mid engine car.
__________________
ABM #2399 2SS/RS:SOLD
ABM #93 2SS/RS Black Rally stripes, Titanium Interior 4,000 miles: GM GFX side skirts and diffuser waiting on paint, GM dovetail, GM heritage, RPI ZL1 style splitter. ‘87 IROC-Z Iroc blue. all original unmolested with 50K miles. |
|
|
|
|
|
#35 |
|
1st Civ. Div.
Drives: Camaroless for now...RIP "Big SexZ" Join Date: Dec 2007
Location: Savannah, Ga
Posts: 2,729
|
Most Corvette generations prior to the C8 Corvette were considered to have a front-mid engine layout due the engine residing behind the front axle line. The C8 is now considered a rear-mid engine layout as the engine is mounted ahead of the rear axle line unlike the Porsche 911 with its rear engine layout being more aft of the rear axle line.
__________________
Swift....Silent....Deadly
|
|
|
|
|
|
#36 |
![]() Drives: multiple cars Join Date: Oct 2017
Location: Pennsylvania
Posts: 565
|
The 911 still has front struts? El cheapo for that level.
The C5/6/7 driveline should have made its way to the Camaro starting in '03. There's no good reason a rear mount trans is just on a $300k pony car. |
|
|
|
|
|
#37 | |
|
waiting at the tree
Drives: SIM 2010 2SS/RS A6 Join Date: Apr 2013
Location: Niagara Falls
Posts: 4,399
|
Quote:
All the others are still struts
__________________
2010 2SS/RS A6 Just a few bolt-ons and appearance doo dads
|
|
|
|
|
|
Post Reply
|
|
|